EP1K10TC100-2 - 10K-Gate ACEX-1K FPGA, 576 LEs, TQFP-100 | Intel
MPN: EP1K10TC100-2 ✗ Cuối đờiEP1K10TC100-2 Tóm tắt
An FPGA (Field Programmable Gate Array) is a semiconductor IC containing an array of configurable logic blocks (LBs), programmable interconnect, and I/O cells that can be re-wired by the user to implement arbitrary digital circuits. Within the wider taxonomy, FPGAs sit above CPLDs and below ASICs in terms of integration density, and they belong to the broader category of programmable logic devices (PLDs). ACEX-1K parts are positioned at the low-density, low-cost end of the FPGA spectrum, intended for glue logic, bus bridging, and small state-machine applications where an ASIC is uneconomical.
Key features include a 0.5 ns pin-to-pin logic delay, dual-port embedded memory, dedicated carry chains for fast arithmetic, JTAG-compliant IEEE 1149.1 boundary-scan, in-system programmability via the serial configuration interface, and support for multiple I/O standards including LVTTL, LVCMOS, and PCI. The device is rated for commercial 0 °C to 70 °C ambient operation and runs from a 2.375 V to 2.625 V core supply.
The EP1K10TC100-2 uses a SRAM-based look-up-table (LUT) architecture with continuous, row-and-column interconnect. Configuration data is loaded from an external serial PROM or via JTAG; the design is volatile and must be re-loaded on every power-up, which differentiates ACEX-1K from one-time-programmable (OTP) anti-fuse families.
Typical applications include industrial control glue logic, communications protocol bridging, low-volume custom peripherals, and legacy retrofit boards where a discontinued discrete-logic design must be consolidated into a single programmable device. The wide 2.5 V tolerance band simplifies multi-voltage design.
When designing with this part, note that the ACEX-1K family has been EOL'd by Altera/Intel; design engineers should verify long-term availability or migrate to a Cyclone equivalent for new designs. Always include a configuration PROM and follow the recommended decoupling scheme (0.1 μF + bulk) on every VCCINT and VCCIO pin pair.
This page consolidates distributor pricing, same-brand drop-in alternatives from the ACEX-1K family, and practical design notes not present in the original datasheet PDF.
Bộ thay thế dễ dàng lắp đặt cho EP1K10TC100-2 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EP1K10TC100-2 (cùng hình factor và footprint) — khác nhau ở Process Technology, Package, Speed Grade, Family, Configuration Method.
EP1K10TC100-1
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP1K10TC100-2N
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP1K10TC100-1N
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP1K10TC100-2 Tỷ lệ tối đa & tính chất điện
| Family | ACEX-1K |
| Device Type | FPGA (Field Programmable Gate Array) |
| Logic Elements / Cells | 576 |
| Number of Logic Array Blocks (LABs/CLBs) | 72 |
| Total RAM Bits | 12288 |
| Number of Gates | 10000 (typical); 56000 (maximum) |
| Number of User I/O | 66 |
| Pin-to-Pin Logic Delay | 0.5 ns |
| Maximum Internal Frequency | 200 MHz (per FPGAkey listing) |
| Process Technology | 0.22 μm CMOS |
| Core Supply Voltage (VCCINT) | 2.375 V to 2.625 V (2.5 V nominal) |
| Nhiệt độ hoạt động | 0 °C to 70 °C (TA, commercial) |
| Hộp | 100-pin TQFP (TQFP-100) |
| Kiểu lắp đặt | Surface Mount |
| Configuration Method | SRAM, serial / JTAG (IEEE 1149.1) |
| Trạng thái RoHS | Compliant (per Heisener / DigiKey listings) |
| Lead-Free | Yes |
Cấu hình chân EP1K10TC100-2
| Chân 1 | I/O — User I/O (bank 1) |
| Chân 2 | I/O — User I/O (bank 1) |
| Chân 3 | I/O — User I/O (bank 1) |
| Chân 4 | I/O — User I/O (bank 1) |
| Chân 5 | I/O — User I/O (bank 1) |
| Chân 6 | VCCIO1 — I/O bank 1 supply |
| Chân 7 | I/O — User I/O (bank 1) |
| Chân 8 | I/O — User I/O (bank 1) |
| Chân 9 | I/O — User I/O (bank 1) |
| Chân 10 | I/O — User I/O (bank 1) |
| Chân 11 | GND — Ground |
| Chân 12 | I/O — User I/O (bank 1) |
| Chân 13 | I/O — User I/O (bank 1) |
| Chân 14 | I/O — User I/O (bank 1) |
| Chân 15 | VCCINT — Core supply 2.5 V |
| Chân 16 | I/O — User I/O (bank 1) |
| Chân 17 | I/O — User I/O (bank 1) |
| Chân 18 | I/O — User I/O (bank 1) |
| Chân 19 | I/O — User I/O (bank 1) |
| Chân 20 | I/O — User I/O (bank 1) |
| Chân 21 | I/O — User I/O (bank 1) |
| Chân 22 | GND — Ground |
| Chân 23 | I/O — User I/O (bank 2) |
| Chân 24 | I/O — User I/O (bank 2) |
| Chân 25 | I/O — User I/O (bank 2) |
| Chân 26 | I/O — User I/O (bank 2) |
| Chân 27 | VCCIO2 — I/O bank 2 supply |
| Chân 28 | I/O — User I/O (bank 2) |
| Chân 29 | I/O — User I/O (bank 2) |
| Chân 30 | I/O — User I/O (bank 2) |
| Chân 31 | I/O — User I/O (bank 2) |
| Chân 32 | I/O — User I/O (bank 2) |
| Chân 33 | I/O — User I/O (bank 2) |
| Chân 34 | GND — Ground |
| Chân 35 | I/O — User I/O (bank 2) |
| Chân 36 | I/O — User I/O (bank 2) |
| Chân 37 | VCCINT — Core supply 2.5 V |
| Chân 38 | I/O — User I/O (bank 2) |
| Chân 39 | I/O — User I/O (bank 2) |
| Chân 40 | I/O — User I/O (bank 2) |
| Chân 41 | I/O — User I/O (bank 2) |
| Chân 42 | I/O — User I/O (bank 2) |
| Chân 43 | I/O — User I/O (bank 2) |
| Chân 44 | GND — Ground |
| Chân 45 | MSEL0 — Configuration mode select 0 |
| Chân 46 | MSEL1 — Configuration mode select 1 |
| Chân 47 | nSTATUS — Configuration status (open drain) |
| Chân 48 | DCLK — Configuration clock input |
| Chân 49 | CONF_DONE — Configuration done (open drain) |
| Chân 50 | VCCINT — Core supply 2.5 V |
| Chân 51 | nCONFIG — Configuration control (active low) |
| Chân 52 | DATA0 — Configuration data input |
| Chân 53 | I/O — User I/O (bank 3) |
| Chân 54 | I/O — User I/O (bank 3) |
| Chân 55 | I/O — User I/O (bank 3) |
| Chân 56 | I/O — User I/O (bank 3) |
| Chân 57 | GND — Ground |
| Chân 58 | I/O — User I/O (bank 3) |
| Chân 59 | I/O — User I/O (bank 3) |
| Chân 60 | I/O — User I/O (bank 3) |
| Chân 61 | VCCIO3 — I/O bank 3 supply |
| Chân 62 | I/O — User I/O (bank 3) |
| Chân 63 | I/O — User I/O (bank 3) |
| Chân 64 | I/O — User I/O (bank 3) |
| Chân 65 | I/O — User I/O (bank 3) |
| Chân 66 | I/O — User I/O (bank 3) |
| Chân 67 | I/O — User I/O (bank 3) |
| Chân 68 | GND — Ground |
| Chân 69 | I/O — User I/O (bank 3) |
| Chân 70 | I/O — User I/O (bank 3) |
| Chân 71 | I/O — User I/O (bank 3) |
| Chân 72 | VCCINT — Core supply 2.5 V |
| Chân 73 | I/O — User I/O (bank 3) |
| Chân 74 | I/O — User I/O (bank 3) |
| Chân 75 | I/O — User I/O (bank 3) |
| Chân 76 | I/O — User I/O (bank 4) |
| Chân 77 | I/O — User I/O (bank 4) |
| Chân 78 | GND — Ground |
| Chân 79 | I/O — User I/O (bank 4) |
| Chân 80 | I/O — User I/O (bank 4) |
| Chân 81 | I/O — User I/O (bank 4) |
| Chân 82 | I/O — User I/O (bank 4) |
| Chân 83 | VCCIO4 — I/O bank 4 supply |
| Chân 84 | I/O — User I/O (bank 4) |
| Chân 85 | I/O — User I/O (bank 4) |
| Chân 86 | I/O — User I/O (bank 4) |
| Chân 87 | I/O — User I/O (bank 4) |
| Chân 88 | I/O — User I/O (bank 4) |
| Chân 89 | I/O — User I/O (bank 4) |
| Chân 90 | GND — Ground |
| Chân 91 | I/O — User I/O (bank 4) |
| Chân 92 | I/O — User I/O (bank 4) |
| Chân 93 | I/O — User I/O (bank 4) |
| Chân 94 | VCCINT — Core supply 2.5 V |
| Chân 95 | TDI — JTAG test data input |
| Chân 96 | TMS — JTAG test mode select |
| Chân 97 | TCK — JTAG test clock |
| Chân 98 | TDO — JTAG test data output |
| Chân 99 | I/O — User I/O (bank 4) |
| Chân 100 | GND — Ground |
Ứng dụng tiêu biểu
EP1K10TC100-2 phù hợp cho 6 Áp dụngs: Industrial Glue Logic Consolidation, Communications Protocol Bridging, Legacy Retrofit Board Replacement, Custom Peripheral Implementation, Test and Measurement Front-End Logic, Educational and Prototyping Platform.
Industrial Glue Logic Consolidation
The EP1K10TC100-2 is well-suited to industrial glue-logic consolidation where a board full of discrete 74-series TTL, bus transceivers, and small state machines must be merged into a single programmable device. Its 576 logic elements and 72 LABs comfortably absorb 5-15 standard-logic functions, while 66 user I/O are enough to replace dozens of discrete packages. The 0.5 ns pin-to-pin delay and 200 MHz internal frequency support typical industrial bus rates (SPI, I2C, parallel async) with margin. Designers typically target this density for retrofit boards where redesign-for-ASIC is uneconomical. Use a 0.1 µF + bulk decoupling pair on every VCCINT and VCCIO bank, and pair the FPGA with an EPCS1 configuration PROM for standalone operation. Industrial temperature grade is not available; the commercial 0 °C to 70 °C window limits deployment to cabinet-resident equipment.
Được đề xuất
Communications Protocol Bridging
The EP1K10TC100-2 fits protocol-bridging applications such as UART-to-SPI, SPI-to-I2C, or parallel-to-serial conversion in embedded telecom and industrial-control equipment. Its 12,288 bits of dual-port embedded RAM can hold small packet buffers or lookup tables without external memory, and the 66 user I/O expose multiple bus interfaces simultaneously. The 0.22 µm 2.5 V fabric delivers 200 MHz internal operation, sufficient for 10-50 Mbps bridging duties. LVTTL and LVCMOS I/O standards cover most 3.3 V and 5 V mixed-voltage bridges via external level shifters. JTAG-based in-system programming allows field firmware updates without removing the device. Note that the SRAM-based configuration requires a configuration PROM or host MCU boot loader; design accordingly to avoid bricking in the field.
Được đề xuất
Legacy Retrofit Board Replacement
Designers use the EP1K10TC100-2 to retrofit end-of-life control boards that previously relied on multiple discrete 74HC/74LS packages or on now-obsolete small PLDs. The same TQFP-100 footprint lets the new design drop into the existing PCB land pattern, and Quartus II synthesis ports legacy schematic-based designs into HDL quickly. 576 LEs comfortably absorb the typical 100-300 logic gates of legacy designs, while 66 user I/O match legacy connector pinouts. Because the part is obsolete and available only from stock, it is best reserved for genuine form-fit-function retrofits rather than new designs. Always derate by operating margin and consider Cyclone II EP2C5T100C7N as the long-term migration target.
Được đề xuất
Custom Peripheral Implementation
The EP1K10TC100-2 enables low-volume custom peripherals such as motor-control timers, sensor pre-processors, and proprietary bus interfaces without committing to an ASIC NRE. Designers implement custom register sets, PWM generators, or quadrature decoders in HDL and benefit from the 0.5 ns pin-to-pin delay for deterministic real-time response. The 12,288-bit dual-port RAM supports small FIFOs for data buffering between the FPGA and a host MCU. Quartus II provides a free development flow with schematic and HDL entry, plus the SignalTap logic analyzer for in-system debug. For new designs, note the limited operating temperature window (commercial only) and plan for Cyclone II migration if the design graduates to volume production.
Được đề xuất
Test and Measurement Front-End Logic
The EP1K10TC100-2 serves well as front-end glue logic in test and measurement fixtures: pattern generation, signal routing matrices, timing-and-control sequencers, and protocol-aware stimulus engines all fit within 576 LEs. The 66 user I/O provide ample fan-out for multi-channel test heads, and the dual-port embedded RAM allows small capture buffers without external memory. Fast pin-to-pin delay (0.5 ns) supports deterministic timing in stimulus generation. JTAG boundary-scan (IEEE 1149.1) simplifies board-level interconnect testing during fixture bring-up. Designers should pair the FPGA with an EPCS configuration PROM so fixtures boot autonomously without a host downloader.
Được đề xuất
Educational and Prototyping Platform
The EP1K10TC100-2 is an accessible low-density FPGA for university digital-logic laboratories and hobby prototyping where students learn HDL design, finite state machines, and bus protocols. The free Altera Quartus II Web Edition supports the part, and the TQFP-100 package is breadboard-friendly via breakout boards. 576 LEs are enough to teach multi-project labs (CPU cores, UARTs, simple graphics) without overwhelming beginners. The 2.5 V core simplifies lab power supplies. Because the part is obsolete, educational users should weigh whether to use a Cyclone II or MAX II dev board instead to gain long-term tool support, but existing lab stock of ACEX-1K boards remains functional for HDL pedagogy.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EP1K10TC100-2 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | EP1K10TC100-1 | EP1K10TC100-2N | EP1K10TC100-1N |
|---|---|---|---|---|
| Package | TQFP-100 | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same |
| Brand | Intel | Intel | Intel | Intel |
| Speed Grade | -2 (0.5 ns) | -1 (~0.6 ns) | -2 (0.5 ns) | -1 (~0.6 ns) |
| Logic Elements | 576 | 576 | 576 | 576 |
| Embedded RAM Bits | 12288 | 12288 | 12288 | 12288 |
| User I/O | 66 | 66 | 66 | 66 |
| Lead-Free / RoHS | Yes | Yes | Yes (N suffix explicit) | Yes (N suffix explicit) |
Bảo phân biệt quan trọng
- Fastest speed grade in the TQFP-100 ACEX-1K family (vsEP1K10TC100-1)
- Original non-N suffix preserves dual footprint compatibility (vsEP1K10TC100-2N)
- TQFP-100 form factor suits legacy PCB retrofit designs (vsEP1K10QC208-2)
Ghi chú thiết kế
Estimated: the EP1K10TC100-2 draws core current in the 50-200 mA range at 2.5 V depending on utilization and toggle rate. Provide a 2.5 V regulator with at least 500 mA headroom and a 0.1 µF ceramic + 10 µF bulk decoupling pair on every VCCINT and VCCIO bank pin. Power-on ramp should be monotonic within the datasheet specification to avoid configuration failure.
Because the EP1K10TC100-2 is SRAM-based, the FPGA is non-functional until a configuration bitstream is loaded. Always include an EPCS1 (or larger EPCS4) serial configuration PROM on the board, or a host MCU capable of serial slave configuration via DCLK and DATA0. Forgetting the configuration source is the single most common reason ACEX-1K boards appear dead on first power-up.
Place 0.1 µF decoupling capacitors within 5 mm of every VCCINT and VCCIO pin pair. Use a solid ground plane on layer 2 and route all high-speed clock and JTAG signals with controlled impedance. The TQFP-100 thermal pad is not present on this package; thermal performance relies on copper pour area and ambient airflow, not on a bottom thermal pad.
Keep JTAG signals (TCK, TMS, TDI, TDO) short and isolated from switching I/O. Pull nCONFIG high through a 1 kΩ resistor to VCCINT and pull nSTATUS and CONF_DONE high through 1 kΩ resistors to VCCINT, since these are open-drain signals. Route the MSEL pins to known logic levels (GND/VCCIO) per the desired configuration mode; do not leave them floating.
Thông tin tuân thủ
RoHS compliant per distributor listings (DigiKey, Heisener). The -N suffix variants explicitly carry the lead-free finish; standard -2 finish is also lead-free per current distributor stock. REACH, halogen-free, and conflict-minerals status not stated in the verified web data and marked unknown.
