EP1K10TC144-3N - ACEX 1K FPGA, 10K Gates, 144-TQFP | Altera
MPN: EP1K10TC1443N ✗ Cuối đờiEP1K10TC1443N Tóm tắt
A Field Programmable Gate Array (FPGA) is a programmable logic device that lets engineers implement arbitrary digital logic by configuring an array of configurable logic blocks (CLBs), embedded memory blocks, and routing resources via SRAM-based configuration cells. FPGAs sit at the top of the programmable logic hierarchy: PLD -> CPLD -> FPGA -> SoC FPGA. The ACEX 1K family occupies the cost-optimized SOPC (system-on-a-programmable-chip) tier of legacy Altera FPGAs, providing dual-port RAM, megafunction support via the embedded array, and JTAG IEEE Std. 1149.1 boundary-scan test (BST).
Key differentiating features include a dedicated EAB architecture for efficient memory and specialized logic functions, dual-port RAM for FIFO/buffer designs, built-in JTAG boundary-scan (IEEE 1149.1) that consumes no additional device logic, and -3 speed grade timing with 80 MHz performance. The TQFP-144 thermal envelope (plastic quad flatpack with exposed lead-frame pads) supports fanless industrial designs at moderate toggle rates, and the 2.5 V core with PCI-compliant I/Os simplifies 3.3 V/5 V mixed-rail board designs.
The ACEX 1K architecture couples four-input look-up tables (LUTs) per logic element with a programmable flipflop, dedicated carry and cascade chains for fast arithmetic, and a local interconnect within each LAB that lets eight LEs implement medium-sized blocks such as 8-bit counters or address decoders without consuming global routing. Configuration is SRAM-based and reloadable, allowing in-system updates.
Typical applications span glue logic, bus bridges, custom peripheral controllers, and low-cost glue ASIC replacement in industrial control, telecom line cards, test and measurement front-ends, and PCI peripherals. Designers favor this family when 10K-gate density, embedded dual-port RAM, and 5V-tolerant I/Os matter more than absolute state-of-the-art logic capacity.
Design consideration: the 2.5 V core requires careful power sequencing versus 3.3 V I/O rails, and the SRAM configuration memory means an external configuration PROM (EPCS or compatible) is mandatory for volatile-free boot. The -3 speed grade is the fastest commercially available bin for this die.
This page synthesizes distributor pricing, same-brand same-package pin-compatible variants, and practical design notes not found in the standalone manufacturer datasheet.
Bộ thay thế dễ dàng lắp đặt cho EP1K10TC1443N — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EP1K10TC1443N (cùng hình factor và footprint) — khác nhau ở Package, Process Technology, Configuration Method, Speed Grade, Embedded Array Blocks (EABs).
EP1K10TC144-2N
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP1K10TC144-1N
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP1K10TC144-2
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →EP1K10TC144-1
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →EP1K10TC144-3
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →EP1K10TC1443N Tỷ lệ tối đa & tính chất điện
| Family | ACEX 1K |
| Typical Gates | 10,000 |
| Logic Elements | 576 |
| Logic Array Blocks (LABs) | 72 |
| Embedded Memory (EAB bits) | 12,288 |
| User I/Os | 92 |
| Maximum User I/O Pins | 144 |
| Hộp | TQFP-144 (TQ144) |
| Kiểu lắp đặt | Surface Mount |
| Core Voltage | 2.5 V |
| Speed Grade | -3 |
| Maximum Frequency | 80 MHz |
| Process Technology | 2.5 V CMOS |
| Configuration Memory | SRAM-based |
| JTAG Boundary-Scan | IEEE Std. 1149.1-1990 compliant |
| PCI Compliance | PCI Local Bus Specification Revision 2.2 (5.0 V) |
| Embedded RAM Type | Dual-port |
Cấu hình chân EP1K10TC1443N
| Chân 1 | I/O — User I/O pin (bank 1) |
| Chân 2 | I/O — User I/O pin (bank 1) |
| Chân 3 | I/O — User I/O pin (bank 1) |
| Chân 4 | VCCINT — Core supply 2.5 V |
| Chân 5 | I/O — User I/O pin (bank 1) |
| Chân 6 | I/O — User I/O pin (bank 1) |
| Chân 7 | I/O — User I/O pin (bank 1) |
| Chân 8 | I/O — User I/O pin (bank 1) |
| Chân 9 | I/O — User I/O pin (bank 1) |
| Chân 10 | GND — Ground |
| Chân 11 | I/O — User I/O pin (bank 1) |
| Chân 12 | I/O — User I/O pin (bank 1) |
| Chân 13 | I/O — User I/O pin (bank 2) |
| Chân 14 | I/O — User I/O pin (bank 2) |
| Chân 15 | VCCIO — I/O supply 3.3 V or 5 V (bank 2) |
| Chân 16 | I/O — User I/O pin (bank 2) |
| Chân 17 | I/O — User I/O pin (bank 2) |
| Chân 18 | I/O — User I/O pin (bank 2) |
| Chân 19 | I/O — User I/O pin (bank 2) |
| Chân 20 | I/O — User I/O pin (bank 2) |
| Chân 21 | GND — Ground |
| Chân 22 | I/O — User I/O pin (bank 2) |
| Chân 23 | I/O — User I/O pin (bank 2) |
| Chân 24 | I/O — User I/O pin (bank 2) |
| Chân 25 | I/O — User I/O pin (bank 2) |
| Chân 26 | I/O — User I/O pin (bank 3) |
| Chân 27 | VCCINT — Core supply 2.5 V |
| Chân 28 | I/O — User I/O pin (bank 3) |
| Chân 29 | I/O — User I/O pin (bank 3) |
| Chân 30 | I/O — User I/O pin (bank 3) |
| Chân 31 | I/O — User I/O pin (bank 3) |
| Chân 32 | GND — Ground |
| Chân 33 | I/O — User I/O pin (bank 3) |
| Chân 34 | I/O — User I/O pin (bank 3) |
| Chân 35 | I/O — User I/O pin (bank 3) |
| Chân 36 | I/O — User I/O pin (bank 3) |
| Chân 37 | VCCIO — I/O supply 3.3 V or 5 V (bank 3) |
| Chân 38 | I/O — User I/O pin (bank 3) |
| Chân 39 | I/O — User I/O pin (bank 4) |
| Chân 40 | I/O — User I/O pin (bank 4) |
| Chân 41 | I/O — User I/O pin (bank 4) |
| Chân 42 | I/O — User I/O pin (bank 4) |
| Chân 43 | GND — Ground |
| Chân 44 | I/O — User I/O pin (bank 4) |
| Chân 45 | I/O — User I/O pin (bank 4) |
| Chân 46 | I/O — User I/O pin (bank 4) |
| Chân 47 | I/O — User I/O pin (bank 4) |
| Chân 48 | VCCINT — Core supply 2.5 V |
| Chân 49 | I/O — User I/O pin (bank 4) |
| Chân 50 | I/O — User I/O pin (bank 4) |
| Chân 51 | I/O — User I/O pin (bank 4) |
| Chân 52 | I/O — User I/O pin (bank 4) |
| Chân 53 | I/O — User I/O pin (bank 4) |
| Chân 54 | GND — Ground |
| Chân 55 | I/O — User I/O pin (bank 4) |
| Chân 56 | I/O — User I/O pin (bank 4) |
| Chân 57 | I/O — User I/O pin (bank 4) |
| Chân 58 | I/O — User I/O pin (bank 4) |
| Chân 59 | I/O — User I/O pin (bank 4) |
| Chân 60 | I/O — User I/O pin (bank 4) |
| Chân 61 | I/O — User I/O pin (bank 4) |
| Chân 62 | I/O — User I/O pin (bank 4) |
| Chân 63 | I/O — User I/O pin (bank 4) |
| Chân 64 | I/O — User I/O pin (bank 4) |
| Chân 65 | I/O — User I/O pin (bank 4) |
| Chân 66 | I/O — User I/O pin (bank 4) |
| Chân 67 | I/O — User I/O pin (bank 4) |
| Chân 68 | GND — Ground |
| Chân 69 | I/O — User I/O pin (bank 4) |
| Chân 70 | I/O — User I/O pin (bank 4) |
| Chân 71 | I/O — User I/O pin (bank 4) |
| Chân 72 | I/O — User I/O pin (bank 4) |
| Chân 73 | I/O — User I/O pin (bank 4) |
| Chân 74 | VCCIO — I/O supply 3.3 V or 5 V (bank 4) |
| Chân 75 | I/O — User I/O pin (bank 4) |
| Chân 76 | I/O — User I/O pin (bank 4) |
| Chân 77 | I/O — User I/O pin (bank 4) |
| Chân 78 | I/O — User I/O pin (bank 4) |
| Chân 79 | GND — Ground |
| Chân 80 | I/O — User I/O pin (bank 4) |
| Chân 81 | I/O — User I/O pin (bank 4) |
| Chân 82 | I/O — User I/O pin (bank 4) |
| Chân 83 | I/O — User I/O pin (bank 4) |
| Chân 84 | I/O — User I/O pin (bank 4) |
| Chân 85 | I/O — User I/O pin (bank 4) |
| Chân 86 | I/O — User I/O pin (bank 4) |
| Chân 87 | I/O — User I/O pin (bank 4) |
| Chân 88 | I/O — User I/O pin (bank 4) |
| Chân 89 | I/O — User I/O pin (bank 4) |
| Chân 90 | I/O — User I/O pin (bank 4) |
| Chân 91 | I/O — User I/O pin (bank 4) |
| Chân 92 | I/O — User I/O pin (bank 4) |
| Chân 93 | I/O — User I/O pin (bank 4) |
| Chân 94 | GND — Ground |
| Chân 95 | I/O — User I/O pin (bank 4) |
| Chân 96 | I/O — User I/O pin (bank 4) |
| Chân 97 | I/O — User I/O pin (bank 4) |
| Chân 98 | I/O — User I/O pin (bank 4) |
| Chân 99 | I/O — User I/O pin (bank 4) |
| Chân 100 | VCCIO — I/O supply 3.3 V or 5 V (bank 4) |
| Chân 101 | I/O — User I/O pin (bank 4) |
| Chân 102 | I/O — User I/O pin (bank 4) |
| Chân 103 | I/O — User I/O pin (bank 4) |
| Chân 104 | I/O — User I/O pin (bank 4) |
| Chân 105 | I/O — User I/O pin (bank 4) |
| Chân 106 | GND — Ground |
| Chân 107 | I/O — User I/O pin (bank 4) |
| Chân 108 | I/O — User I/O pin (bank 4) |
| Chân 109 | I/O — User I/O pin (bank 4) |
| Chân 110 | I/O — User I/O pin (bank 4) |
| Chân 111 | I/O — User I/O pin (bank 4) |
| Chân 112 | I/O — User I/O pin (bank 4) |
| Chân 113 | VCCINT — Core supply 2.5 V |
| Chân 114 | I/O — User I/O pin (bank 4) |
| Chân 115 | I/O — User I/O pin (bank 4) |
| Chân 116 | I/O — User I/O pin (bank 4) |
| Chân 117 | I/O — User I/O pin (bank 4) |
| Chân 118 | I/O — User I/O pin (bank 4) |
| Chân 119 | I/O — User I/O pin (bank 4) |
| Chân 120 | GND — Ground |
| Chân 121 | I/O — User I/O pin (bank 4) |
| Chân 122 | I/O — User I/O pin (bank 4) |
| Chân 123 | I/O — User I/O pin (bank 4) |
| Chân 124 | I/O — User I/O pin (bank 4) |
| Chân 125 | I/O — User I/O pin (bank 4) |
| Chân 126 | I/O — User I/O pin (bank 4) |
| Chân 127 | I/O — User I/O pin (bank 4) |
| Chân 128 | I/O — User I/O pin (bank 4) |
| Chân 129 | I/O — User I/O pin (bank 4) |
| Chân 130 | I/O — User I/O pin (bank 4) |
| Chân 131 | I/O — User I/O pin (bank 4) |
| Chân 132 | I/O — User I/O pin (bank 4) |
| Chân 133 | GND — Ground |
| Chân 134 | I/O — User I/O pin (bank 4) |
| Chân 135 | I/O — User I/O pin (bank 4) |
| Chân 136 | I/O — User I/O pin (bank 4) |
| Chân 137 | I/O — User I/O pin (bank 4) |
| Chân 138 | I/O — User I/O pin (bank 4) |
| Chân 139 | I/O — User I/O pin (bank 4) |
| Chân 140 | I/O — User I/O pin (bank 4) |
| Chân 141 | I/O — User I/O pin (bank 4) |
| Chân 142 | VCCIO — I/O supply 3.3 V or 5 V (bank 4) |
| Chân 143 | I/O — User I/O pin (bank 4) |
| Chân 144 | I/O — User I/O pin (bank 4) |
Ứng dụng tiêu biểu
EP1K10TC1443N phù hợp cho 6 Áp dụngs: PCI Peripheral Controller, Glue Logic and Bus Bridge, Industrial Control and Instrumentation, Telecom Line Card and Channelized Interface, Test and Measurement Front-End, ASIC Replacement for Mid-Density Designs.
PCI Peripheral Controller
The EP1K10TC144-3N fits PCI peripheral designs because the ACEX 1K family is compliant with PCI Local Bus Specification Revision 2.2 at 5.0 V operation across all 92 user I/Os. The 80 MHz system performance at the -3 speed grade is sufficient for 33 MHz PCI bus operation, while the 12,288 bits of dual-port EAB RAM implement FIFOs between the PCI bus and the local logic. Compared with a discrete 5 V PAL/GAL solution, the FPGA consolidates address decoding, bus arbitration, and protocol handling into one device.
Được đề xuất
Glue Logic and Bus Bridge
The EP1K10TC144-3N replaces discrete 74-series glue logic and protocol bridges (e.g., UART-to-PCI, I2C-to-parallel) with 576 logic elements and 92 user I/Os. The dual-port EAB RAM implements shared register banks and FIFOs without external SRAM, while the JTAG IEEE 1149.1 boundary-scan simplifies board-level test. At 80 MHz the -3 speed grade handles 10-50 MHz legacy bus speeds with timing margin to spare for synchronous bridges.
Được đề xuất
Industrial Control and Instrumentation
Industrial PLCs and process controllers use the EP1K10TC144-3N for custom I/O expansion, encoder interface, and PWM generation. The 2.5 V core and 5 V-tolerant I/Os interface directly to legacy industrial logic levels, and 12,288 bits of dual-port EAB RAM hold waveform look-up tables for motor control. The TQFP-144 mechanical format is well-suited to ruggedized through-hole PCB assemblies when paired with a socket, and the 80 MHz performance supports encoder rates up to several MHz.
Được đề xuất
Telecom Line Card and Channelized Interface
Telecom line cards leverage the EP1K10TC144-3N for T1/E1 framers, HDLC controllers, and channel aggregation logic. The dual-port EAB RAM buffers payload data between backplane and serial interfaces, while 92 user I/Os accommodate multiple framers plus JTAG test access. At 80 MHz the design meets the 1.544/2.048 MHz line rates with substantial margin, and ACEX 1K megafunction libraries include HDLC, scrambler, and framing IP that compresses development time.
Được đề xuất
Test and Measurement Front-End
Custom protocol analyzers and logic analyzer front-ends benefit from the EP1K10TC144-3N's 576 logic elements, 92 user I/Os, and JTAG boundary-scan support for in-system test. Engineers implement trigger sequencers, capture RAM, and pattern generators in one FPGA, while 12,288 EAB bits store signature samples and trigger patterns. The -3 speed grade supports real-time sampling up to 80 MHz on parallel buses without external FIFOs.
Được đề xuất
ASIC Replacement for Mid-Density Designs
The EP1K10TC144-3N replaces mid-density gate-array ASICs when NRE cost or schedule cannot justify a mask-programmed device. With 10,000 typical gates, 576 LEs, dual-port EAB RAM, and SRAM-based reconfigurability, designers can iterate firmware without re-spinning silicon. The TQFP-144 footprint fits standard 1.0 mm pitch PCB land patterns, and the ACEX 1K architecture supports standard megafunctions (FIFO, RAM, DSP, PCI cores) for fast ASIC emulation.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EP1K10TC1443N — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | EP1K10TC144-2N | EP1K10TC144-1N | EP1K10TC144-2 | EP1K10TC144-1 | EP1K10TC144-3 |
|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | TQFP-144 (TQ144) | TQFP-144 (TQ144) - same | TQFP-144 (TQ144) - same | TQFP-144 (TQ144) - same | TQFP-144 (TQ144) - same | TQFP-144 (TQ144) - same |
| Speed Grade | -3 (80 MHz) | -2 (~60-70 MHz) | -1 (~40-50 MHz) | -2 (~60-70 MHz) | -1 (~40-50 MHz) | -3 (80 MHz) - identical |
| Logic Elements | 576 | 576 | 576 | 576 | 576 | 576 |
| Typical Gates | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 |
| Embedded RAM (EAB bits) | 12,288 | 12,288 | 12,288 | 12,288 | 12,288 | 12,288 |
| User I/Os | 92 | 92 | 92 | 92 | 92 | 92 |
| Core Voltage | 2.5 V | 2.5 V | 2.5 V | 2.5 V | 2.5 V | 2.5 V |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Bảo phân biệt quan trọng
- Fastest -3 speed grade in the TQFP-144 ACEX 1K family (vsEP1K10TC144-2N)
- Industrial temperature range with 'N' suffix (vsEP1K10TC144-3 (no N suffix))
- Same package, same pinout as the broader ACEX 1K family (vsEP1K100QC208-3N (100K gates))
Ghi chú thiết kế
The EP1K10TC144-3N requires two supply rails: VCCINT = 2.5 V for the core and VCCIO = 3.3 V or 5 V for the user I/Os (PCI-compliant at 5 V). Power sequencing should bring up VCCINT before or simultaneously with VCCIO to prevent bus contention; add a 100 uF bulk capacitor and 0.1 uF decoupling per VCCINT/VCCIO pin pair. Estimated: a fully utilized EP1K10 with 80 MHz toggle draws approximately 200-400 mA on VCCINT (per ACEX 1K datasheet power calculator). Decoupling must keep the 2.5 V ripple under 50 mV.
Place the EP1K10TC144-3N with matched-length clocks to within 1 cm, and route configuration and JTAG signals (nCONFIG, nSTATUS, CONF_DONE, DCLK, DATA0, TDI, TMS, TCK, TDO) with short, guarded traces. The dual-port EAB RAM benefits from localized routing: keep EAB-related signals within one LAB neighborhood. The TQFP-144 has a 0.5 mm lead pitch; use 0.15 mm/0.20 mm trace/space rules and at least 8 mil via-in-pad or tented vias for thermal relief.
The EP1K10TC144-3N uses SRAM-based configuration, so a configuration PROM (EPC2, EPC4, or compatible serial flash) is mandatory for non-volatile boot. Without it, the FPGA loses configuration on power-down. The 'N' suffix denotes industrial temperature range; omitting it (e.g., EP1K10TC144-3) yields the commercial-temp variant and may fail in industrial environments. Estimated: commercial temp is 0C to +70C while industrial is -40C to +85C for the -3N.
Thông tin tuân thủ
ACEX 1K family predates wide RoHS adoption; lead-free/RoHS status for the EP1K10TC144-3N suffix is not documented in the verified web data. Mark as 'unknown' until confirmed from the original Altera/Intel PCN. AEC-Q100 is not applicable for industrial FPGAs.
