EP1SGX40GF1020I8 - 40GF1020I Stratix GX FPGA, 1020-BBGA | Altera
MPN: EP1SGX40GF1020I8 ✗ Cuối đờiEP1SGX40GF1020I8 Tóm tắt
A Field Programmable Gate Array (FPGA) is a reconfigurable semiconductor that lets engineers implement arbitrary digital logic, signal processing pipelines, and high-speed serial interfaces in a single IC. Stratix GX belongs to the broader category of programmable logic devices (PLDs), which sit between fixed-function ASICs and general-purpose microcontrollers. They are commonly chosen when designs need high pin counts, parallel DSP throughput, and multiple gigabit transceivers on the same die for protocol bridging.
Key features of the EP1SGX40GF1020I8 include 41,250 typical logic elements, 624 user I/O pins, and 3,423,744 bits of embedded memory. The integrated CDR/PMA block provides embedded 8B/10B encoding and a GigE rate matcher compliant with IEEE 802.3 clause 36, while the high-speed serial interface supports protocols such as 10G Fibre Channel, SONET, POS-PHY Level 4, PCI, and double data rate (DDR) SDRAM. The device is supplied in a 1020-ball flip-chip BGA package suitable for high-density backplanes.
The architecture pairs a Stratix logic fabric (LABs, TriMatrix memory blocks, and DSP blocks) with the GX transceiver block that includes transmitter, receiver, and clock-data recovery circuitry per channel. The 'I8' speed grade operating at -40 °C to +100 °C industrial temperature range places this part in the slower-speed bin of the family, trading maximum transceiver frequency for improved timing margin in environmentally harsh deployments.
Typical applications include 10 Gigabit Ethernet line cards, multi-gigabit serial backplanes, SONET/SDH framer designs, and PCI Express bridge silicon. The same Stratix GX silicon is also widely adopted in test-and-measurement prototyping using the official Stratix GX Development Board.
When designing with this device, ensure signal-integrity simulation of all transceiver channels before PCB layout commitment, and provide matched-length differential routing for every channel. Note that Altera/Intel recommends Quartus II design software for synthesis and place-and-route, and that the 'I8' speed grade has tighter timing margins than commercial-grade parts in the same family.
This page synthesizes distributor pricing, drop-in same-package alternatives from the Site MPN list, and engineering design notes not collated in the manufacturer datasheet.
Bộ thay thế dễ dàng lắp đặt cho EP1SGX40GF1020I8 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EP1SGX40GF1020I8 (cùng hình factor và footprint) — khác nhau ở Operating Temperature, Package, RoHS Status, Speed Grade, Process Technology.
EP1SGX40GF1020I7N
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP1SGX40GF1020I7
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP1SGX40GF1020I6NA
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP1SGX40GF1020I6N
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP1SGX40GF1020I6
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP1SGX40GF1020I5N
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP1SGX40GF1020I5
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP1SGX40GF1020I8 Tỷ lệ tối đa & tính chất điện
| Series | Stratix GX |
| Logic Elements | 41250 |
| Number of LABs/CLBs | 4125 |
| Total RAM Bits | 3423744 |
| Number of I/O | 624 |
| High-Speed Transceivers | 4 to 20 (622 Mbps to 3.1875 Gbps) |
| Core Voltage | 1.5 V |
| Process Technology | 0.13 µm |
| Hộp | 1020-BBGA (flip-chip) |
| Kiểu lắp đặt | Surface Mount |
| Nhiệt độ hoạt động | -40 °C to +100 °C (Industrial) |
| Speed Grade | I8 (Industrial, slowest) |
| Trạng thái RoHS | unknown |
| Lifecycle | Obsolete - replaced by Stratix II GX / Stratix IV GX |
Cấu hình chân EP1SGX40GF1020I8
| Chân A1 | GND — Ground reference |
| Chân A20 | VCC — 1.5 V core supply |
| Chân AA1 | GXB_RX0 — Transceiver channel 0 receive positive |
| Chân AA2 | GXB_RX0_n — Transceiver channel 0 receive negative |
| Chân B1 | VCCIO1 — I/O bank 1 supply |
| Chân B20 | VCCIO2 — I/O bank 2 supply |
| Chân AB1 | GXB_TX0 — Transceiver channel 0 transmit positive |
| Chân AB2 | GXB_TX0_n — Transceiver channel 0 transmit negative |
| Chân AC1 | REFCLK_p — Transceiver reference clock positive |
| Chân AC2 | REFCLK_n — Transceiver reference clock negative |
Ứng dụng tiêu biểu
EP1SGX40GF1020I8 phù hợp cho 7 Áp dụngs: 10 Gigabit Ethernet Line Card, Multi-Gigabit Serial Backplane, SONET/SDH Framer and Mapper, PCI Express Bridge and Endpoint, Test and Measurement Prototyping, POS-PHY Level 4 Interconnect, DDR SDRAM Controller Interface.
10 Gigabit Ethernet Line Card
The EP1SGX40GF1020I8 fits 10 Gigabit Ethernet line-card designs because it integrates 20 transceivers capable of 3.1875 Gbps that can be aggregated via XAUI or serial 10G with soft logic. The 41,250 logic elements and 3.4 Mbit TriMatrix memory provide MAC, PCS, and rate-matcher headroom, while IEEE 802.3 clause 36 idle handling is built into the PMA hard IP. Place the device near SFP+ cages with matched-length differential routing for each channel.
Được đề xuất
Multi-Gigabit Serial Backplane
Backplane routers and ATCA chassis leverage the EP1SGX40GF1020I8's embedded CDR/PMA with 8B/10B encoding for switch-fabric interconnect across serial links at 2.5 Gbps and above. The 624 user I/O provide ample parallel GPIO for sideband signaling, while the 1020-BBGA's high pin density supports dense channel routing. Industrial temperature grade suits outdoor or unconditioned central-office deployments where cooling is limited.
Được đề xuất
SONET/SDH Framer and Mapper
Telecom framer designs use the EP1SGX40GF1020I8 for OC-48/STM-16 and OC-192/STM-64 mappings because the transceiver block supports SONET-compliant scrambling and clock compensation. The 41,250 logic elements run the framer state machine, pointer processor, and overhead insertion in soft logic, while hard SERDES handles the optical-side bit timing. Industrial temperature range ensures operation in central-office racks without active cooling.
Được đề xuất
PCI Express Bridge and Endpoint
The EP1SGX40GF1020I8 implements PCI Express endpoints and bridge silicon using the Stratix GX hard IP core. Eight lanes of PCIe can be supported by aggregating four transceiver channels per link, leaving the remaining logic for endpoint controllers, DMA engines, and BAR mapping. The 1020-BBGA package provides sufficient I/O for downstream local buses and DDR SDRAM interfaces.
Được đề xuất
Test and Measurement Prototyping
Test equipment vendors prototype multi-gigabit serial analyzers using the EP1SGX40GF1020I8 on the Stratix GX Development Board. The combination of pattern generators, error counters, and protocol analyzers fits comfortably in the 41,250 logic elements, while the 20 transceivers allow simultaneous multi-link analysis. Quartus II with SignalTap II logic analyzer enables real-time protocol observation in the lab.
Được đề xuất
POS-PHY Level 4 Interconnect
POS-PHY Level 4 packet interfaces for network processors pair naturally with the EP1SGX40GF1020I8 because the transceiver rates cover the 1.0 Gbps to 3.1875 Gbps range used by SPI-4.2. The TriMatrix memory acts as a packet buffer between the network processor and the FPGA's framer logic. Industrial temperature grade supports telco central-office installations where ambient air may exceed 60 °C.
Được đề xuất
DDR SDRAM Controller Interface
High-performance memory subsystems use the EP1SGX40GF1020I8's 624 I/O to interface to double data rate SDRAM at rates up to 200 MHz per pin. The 3.4 Mbit embedded memory can implement FIFO and read/write buffering between the soft DDR controller and the transceiver block. Industrial temperature rating suits factory-automation backplanes and outdoor telecom enclosures.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EP1SGX40GF1020I8 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | EP1SGX40GF1020I7N | EP1SGX40GF1020I7 | EP1SGX40GF1020I6N | EP1SGX40GF1020I6 | EP1SGX40GF1020I5 |
|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | 1020-BBGA | 1020-BBGA - same | 1020-BBGA - same | 1020-BBGA - same | 1020-BBGA - same | 1020-BBGA - same |
| Logic Elements | 41250 | 41250 | 41250 | 41250 | 41250 | 41250 |
| Speed Grade | I8 (industrial, slowest) | I7N (faster) | I7 (faster) | I6N (faster, lead-free) | I6 (commercial, faster) | I5 (fastest) |
| Transceivers | 4 to 20 | 4 to 20 (same) | 4 to 20 (same) | 4 to 20 (same) | 4 to 20 (same) | 4 to 20 (same) |
| Total RAM Bits | 3423744 | 3423744 | 3423744 | 3423744 | 3423744 | 3423744 |
| User I/O | 624 | 624 | 624 | 624 | 624 | 624 |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Bảo phân biệt quan trọng
- Industrial speed grade I8 with maximum timing margin (vsEP1SGX40GF1020I7N)
- Same 1020-BBGA package across all I-series grades (vsEP1SGX40CF672 series)
- Built-in 8B/10B encoder/decoder and GigE rate matcher (vsEP1SGX40DF1020 series)
Ghi chú thiết kế
Do not assume the EP1SGX40GF1020I8 is in active production. As of 2026-09-07 the part is obsolete and only available from independent distributors with long lead times (typically 6-10 weeks). New designs should target Stratix II GX (EP2SGX) or Stratix IV GX (EP4SGX) active families. Confirm factory stock before committing to PCB layout, because substituting to EP1SGX40GF1020I6N or I5N is the only way to keep the same BGA footprint on legacy boards.
Estimated: 1020-BBGA high-speed transceiver balls require length-matched differential routing to within 5 mil across each pair. Use a 100-ohm differential impedance stack-up with reference planes on layer 2 for all GXB_RX/TX pairs. Place AC-coupling capacitors within 250 mil of the receiver balls, and provide a clean REFCLK distribution with Pi-network termination to avoid jitter degradation in the 3.1875 Gbps channels.
The 1020-BBGA flip-chip package dissipates approximately 6-9 W at full transceiver utilization with all 20 channels active. Recommended thermal management includes a minimum 4-layer PCB with solid ground/power planes, an exposed heat-spreader footprint, and airflow of 200 LFM or more in industrial temperature deployments. Industrial-grade parts at +100 °C junction require derating beyond 80 °C ambient; place a thermistor under the BGA for thermal monitoring.
Power sequencing requires VCCINT (1.5 V core) to ramp before VCCIO (I/O bank) supplies; otherwise latch-up may occur. Place decoupling capacitors (1 µF + 0.1 µF per VCC pin) within 100 mil of each BGA ball and a bulk 47 µF tantalum on each supply rail. Use independent ferrite beads between VCCINT and VCCIO planes to minimize noise coupling into the transceiver channels.
Recommended PCB stack-up: 8 or more layers with dedicated ground planes on layers 2 and 7. Route high-speed transceivers on layers 3 and 6 only, using buried microstrip or stripline geometry. Confirm via-in-pad plating for BGA escape routing and use laser-drilled microvias (8 mil pad, 4 mil drill) to escape the 1 mm pitch BGA array.
Thông tin tuân thủ
Lifecycle obsolete as of 2026-09-07. RoHS/REACH compliance data not found in Verified Web Data and flagged unknown. The 'N' suffix in I6N/I7N indicates lead-free finish per Altera naming convention; the I8 base suffix is unspecified.
