EP2AGX190FF35I5G - Arria II GX FPGA, 181K LE, 1152-FBGA | Intel
MPN: EP2AGX190FF35I5G ✗ Cuối đờiEP2AGX190FF35I5G Tóm tắt
What is an FPGA? An FPGA (Field Programmable Gate Array) is a semiconductor device whose digital logic, interconnect, and I/O behaviour can be reconfigured after manufacturing. FPGAs sit in the programmable logic category between fixed-function ASICs and software-driven processors, providing hardware-level parallelism for DSP, packet processing, and high-speed serial I/O. Within Intel's portfolio, the Arria II GX family targets mid-range applications that require transceivers and moderate logic density at lower power than Stratix but higher capability than Cyclone.
The EP2AGX190FF35I5G integrates up to 12 embedded transceivers supporting multi-gigabit serial protocols, dedicated on-chip memory blocks, and hard PCIe, Ethernet MAC, and DDR2/DDR3 memory controller IP blocks. The 8-bit Adaptive Logic Module (ALM) architecture is backward-compatible with 4-input LUT designs, simplifying migration from older Altera families. The flip-chip BGA package enables the high I/O count and signal integrity required for parallel memory buses and multiple SERDES lanes.
Typical applications include high-speed serial interface bridging, telecom baseband processing, video broadcast equipment, military/aerospace signal processing, and ASIC prototyping. The combination of transceiver-rich architecture and substantial logic resources also suits medical imaging and industrial vision systems where deterministic latency matters.
When designing with this device, allocate PCB layer stack-up for the FC-FBGA fan-out, observe the in-package decoupling capacitor guidelines in the Arria II GX handbook, and validate transceiver channel performance against the IBIS-AMI models. Use the Quartus II design suite (version 13.0 or later) for synthesis, place-and-route, and timing closure.
This page synthesizes distributor pricing, drop-in alternative MPNs from the same Arria II GX family, and design considerations not found in the bare datasheet, providing actionable engineering context for sourcing and design decisions.
Bộ thay thế dễ dàng lắp đặt cho EP2AGX190FF35I5G — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EP2AGX190FF35I5G (cùng hình factor và footprint) — khác nhau ở Package, Speed Grade, Operating Temperature, Mounting Type, RoHS Status.
EP2AGX190FF35I3G
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP2AGX190FF35I5
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP2AGX190FF35I3N
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP2AGX190FF35C6G
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP2AGX190FF35C5G
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP2AGX190FF35C4G
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP2AGX190FF35I5G Tỷ lệ tối đa & tính chất điện
| Family | Arria II GX |
| Logic Elements | 181,165 |
| Embedded Memory Bits | 10,177,536 |
| Total RAM Bits | 10,177,536 |
| User I/O Count | 612 |
| Number of Transceivers | 12 |
| Process Technology | 40 nm |
| Core Voltage | 0.9 V |
| Package Type | 1152-BBGA, FC-FBGA |
| Kiểu lắp đặt | Surface Mount |
| Nhiệt độ hoạt động | -40C to +100C (Industrial) |
| Kiểu bộ nhớ | Embedded SRAM |
| ALM Architecture | 8-bit Adaptive Logic Module |
Hướng dẫn cấu hình chân EP2AGX190FF35I5G 1152-bbga, fc-fbga
Cấu hình chân cho EP2AGX190FF35I5G (1152-bbga, fc-fbga gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho EP2AGX190FF35I5G.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
EP2AGX190FF35I5G phù hợp cho 6 Áp dụngs: Telecom Baseband Processing, High-Speed Serial Interface Bridging, Video Broadcast Equipment, Military and Aerospace Signal Processing, ASIC Prototyping and Emulation, Medical Imaging Systems.
Telecom Baseband Processing
The EP2AGX190FF35I5G fits telecom baseband processing because of its 181,165 logic elements, 12 multi-gigabit transceivers, and dedicated hard IP for CPRI, OBSAI, and Serial RapidIO. Place the device between baseband ASICs and the RF front-end, using SERDES lanes to backhaul digitized samples at line rates up to 3.75 Gbps per channel. Industrial temperature rating ensures reliable operation in outdoor base stations and remote radio heads where ambient swings are common.
Được đề xuất
High-Speed Serial Interface Bridging
The 12 multi-gigabit transceivers make the EP2AGX190FF35I5G well suited as a protocol bridge between PCIe Gen2, XAUI, Serial RapidIO, and custom serial links. With 612 user I/O plus 12 SERDES lanes, a single device can replace multiple smaller FPGAs in fan-out cards. Industrial temperature rating also lets the same design operate in defense and avionics protocol-conversion racks without redesign.
Được đề xuất
Video Broadcast Equipment
The EP2AGX190FF35I5G drives broadcast video systems such as SDI routers, multiviewers, and format converters because of its 9.7 Mbit on-chip memory, 181,165 logic elements, and plentiful LVDS-capable I/O. Embed clock domain crossing and frame buffering in the M9K blocks to minimize external SDRAM pressure. Industrial temperature rating supports centralized head-end installations where rack cooling may be limited.
Được đề xuất
Military and Aerospace Signal Processing
The EP2AGX190FF35I5G suits defense applications such as radar digitizers, electronic warfare subsystems, and secure communications because of its industrial temperature rating, 40 nm low-power process, and certified reliability flow. The 1152-ball FC-FBGA withstands high-vibration mounting when properly underfilled, and Altera/Intel's military pedigree includes long-term program support. Designers can implement real-time FFT, channelization, and crypto offload entirely on-chip.
Được đề xuất
ASIC Prototyping and Emulation
With 181,165 logic elements and abundant on-chip memory, the EP2AGX190FF35I5G emulates mid-complexity ASICs, especially designs dominated by bus fabrics, FIFOs, and custom peripherals. The 8-bit ALM architecture is backward-compatible with 4-input LUT designs, simplifying migration from older ASIC prototypes. Industrial temperature rating also lets prototype boards sit beside production hardware in accelerated life-test chambers.
Được đề xuất
Medical Imaging Systems
The EP2AGX190FF35I5G is well matched to medical imaging front-ends such as ultrasound beamformers, CT reconstruction pipelines, and endoscopy video processors. Its 12 transceivers aggregate raw data from high-speed ADCs, while 9.7 Mbit on-chip memory buffers line scan data before downstream processing. Industrial temperature rating also accommodates the wider thermal envelope of cart-based and portable diagnostic equipment.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EP2AGX190FF35I5G — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | EP2AGX190FF35I3G | EP2AGX190FF35I5 | EP2AGX190FF35I3N | EP2AGX190FF35C6G | EP2AGX190FF35C5G | EP2AGX190FF35C4G |
|---|---|---|---|---|---|---|---|
| Package | 1152-BBGA, FC-FBGA | 1152-BBGA, FC-FBGA - same | 1152-BBGA, FC-FBGA - same | 1152-BBGA, FC-FBGA - same | 1152-BBGA, FC-FBGA - same | 1152-BBGA, FC-FBGA - same | 1152-BBGA, FC-FBGA - same |
| Brand | Intel | Intel | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 181,165 | 181,165 - same | 181,165 - same | 181,165 - same | 181,165 - same | 181,165 - same | 181,165 - same |
| Embedded Memory (bits) | 10,177,536 | 10,177,536 - same | 10,177,536 - same | 10,177,536 - same | 10,177,536 - same | 10,177,536 - same | 10,177,536 - same |
| User I/O | 612 | 612 - same | 612 - same | 612 - same | 612 - same | 612 - same | 612 - same |
| Speed Grade | I5 | I3 (faster) | I5 - same | I3 (faster, Pb-free N rev) | C6 (faster, commercial) | C5 (commercial) | C4 (commercial) |
| Operating Temperature | -40C to +100C (Industrial) | -40C to +100C (Industrial) | -40C to +100C (Industrial) | -40C to +100C (Industrial) | 0C to +85C (Commercial) | 0C to +85C (Commercial) | 0C to +85C (Commercial) |
| Pb-free / RoHS | Pb-free (G suffix) | Pb-free (G suffix) | SnPb (no G suffix) | Pb-free (N rev) | Pb-free (G suffix) | Pb-free (G suffix) | Pb-free (G suffix) |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | NRND | NRND |
| Process Technology | 40 nm | 40 nm - same | 40 nm - same | 40 nm - same | 40 nm - same | 40 nm - same | 40 nm - same |
Bảo phân biệt quan trọng
- Highest user I/O count in the FF35 family (vsEP2AGX190EF29I5G)
- Industrial temperature rating vs commercial-only alternatives (vsEP2AGX190FF35C5G)
- Faster speed grade available as drop-in (vsEP2AGX190FF35I3G)
Ghi chú thiết kế
The 1152-ball FC-FBGA package dissipates significant heat at full utilization of 181,165 logic elements plus 12 transceivers. Estimate: at 0.9 V core with typical logic toggling, internal dissipation can exceed 5 W, plus transceiver power of 100-300 mW per lane. Mount a thermal management solution (heat spreader, heatsink, or forced airflow) per Arria II GX Device Handbook thermal guidelines; otherwise junction temperature can overshoot the +100C industrial limit.
The 1152-ball FC-FBGA requires a high-layer-count PCB (typically 12-16 layers) with microvia-in-pad or stacked-microvia construction for breakout. Route differential SERDES pairs with 100 ohm differential impedance and length-matched within 150 mil per the Arria II GX transceiver layout guidelines. Provide continuous ground planes beneath the BGA for return-path integrity and to control SSO noise on the 612 user I/O.
Do not assume pin-compatibility between FF35 (1152-ball) and EF29 (780-ball) packages - they share the same die but have completely different pinouts. Verify the exact order code suffix carefully when sourcing: 'I' = industrial temp, 'C' = commercial, the trailing number (3/4/5/6/7) = speed grade (higher is faster), 'G' = Pb-free, 'N' = Pb-free newer revision. Mixing up speed grades causes timing closure failures; mixing up packages causes layout rework.
Estimated: total power budget at full utilization is approximately 8-12 W. The device requires multiple supply rails (0.9 V core, 1.1 V/1.2 V/1.5 V/2.5 V/3.0 V for transceiver PLL and I/O groups, plus 1.5 V/1.8 V DDR2/DDR3 reference). Use Altera's PowerPlay Early Power Estimator spreadsheet to size regulators before schematic capture. Decoupling must follow the per-bank capacitor count listed in the Arria II GX pin connection guidelines.
Place reference clocks near their associated transceiver banks and route them with controlled 50 ohm single-ended impedance; AC-couple the SERDES lines per the protocol-specific reference design. Keep JTAG and configuration pins (nCONFIG, nSTATUS, CONF_DONE, MSEL) accessible for in-system programming via the JTAG header or EPCS configuration device. Use the Quartus II pin planner with the FF35 FF1152 package file to validate pin assignments before layout.
Thông tin tuân thủ
G suffix in the order code indicates Pb-free lead finish per JEDEC J-STD-609; RoHS and REACH compliance was not present in the verified web data and is marked unknown. AEC-Q100 is not applicable to FPGAs. Confirm compliance with Intel's product declaration documents before regulated designs.
