EP2AGX190FF35I5G - Arria II GX FPGA, 181K LE, 1152-FBGA | Intel
MPN： EP2AGX190FF35I5G ✗ 停產EP2AGX190FF35I5G 概覽
What is an FPGA? An FPGA (Field Programmable Gate Array) is a semiconductor device whose digital logic, interconnect, and I/O behaviour can be reconfigured after manufacturing. FPGAs sit in the programmable logic category between fixed-function ASICs and software-driven processors, providing hardware-level parallelism for DSP, packet processing, and high-speed serial I/O. Within Intel's portfolio, the Arria II GX family targets mid-range applications that require transceivers and moderate logic density at lower power than Stratix but higher capability than Cyclone.
The EP2AGX190FF35I5G integrates up to 12 embedded transceivers supporting multi-gigabit serial protocols, dedicated on-chip memory blocks, and hard PCIe, Ethernet MAC, and DDR2/DDR3 memory controller IP blocks. The 8-bit Adaptive Logic Module (ALM) architecture is backward-compatible with 4-input LUT designs, simplifying migration from older Altera families. The flip-chip BGA package enables the high I/O count and signal integrity required for parallel memory buses and multiple SERDES lanes.
Typical applications include high-speed serial interface bridging, telecom baseband processing, video broadcast equipment, military/aerospace signal processing, and ASIC prototyping. The combination of transceiver-rich architecture and substantial logic resources also suits medical imaging and industrial vision systems where deterministic latency matters.
When designing with this device, allocate PCB layer stack-up for the FC-FBGA fan-out, observe the in-package decoupling capacitor guidelines in the Arria II GX handbook, and validate transceiver channel performance against the IBIS-AMI models. Use the Quartus II design suite (version 13.0 or later) for synthesis, place-and-route, and timing closure.
This page synthesizes distributor pricing, drop-in alternative MPNs from the same Arria II GX family, and design considerations not found in the bare datasheet, providing actionable engineering context for sourcing and design decisions.
直接替換替代品，適用於 EP2AGX190FF35I5G — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： EP2AGX190FF35I5G （相同外形與佔位） — 差異在於 Package, Speed Grade, Operating Temperature, Mounting Type, RoHS Status.
EP2AGX190FF35I3G
✅ 直接替換聯絡詢價
查看資料表 →EP2AGX190FF35I5
✅ 直接替換聯絡詢價
查看資料表 →EP2AGX190FF35I3N
✅ 直接替換聯絡詢價
查看資料表 →EP2AGX190FF35C6G
✅ 直接替換聯絡詢價
查看資料表 →EP2AGX190FF35C5G
✅ 直接替換聯絡詢價
查看資料表 →EP2AGX190FF35C4G
✅ 直接替換聯絡詢價
查看資料表 →EP2AGX190FF35I5G 最大額定值與電氣特性
| Family | Arria II GX |
| Logic Elements | 181,165 |
| Embedded Memory Bits | 10,177,536 |
| Total RAM Bits | 10,177,536 |
| User I/O Count | 612 |
| Number of Transceivers | 12 |
| Process Technology | 40 nm |
| Core Voltage | 0.9 V |
| Package Type | 1152-BBGA, FC-FBGA |
| 安裝類型 | Surface Mount |
| 工作溫度 | -40C to +100C (Industrial) |
| 記憶體類型 | Embedded SRAM |
| ALM Architecture | 8-bit Adaptive Logic Module |
EP2AGX190FF35I5G 1152-bbga, fc-fbga 腳位配置指南
EP2AGX190FF35I5G（1152-bbga, fc-fbga 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： EP2AGX190FF35I5G.
請參閱 資料表 以查看完整腳位配置。
典型應用
EP2AGX190FF35I5G 適用於 6 應用s: Telecom Baseband Processing, High-Speed Serial Interface Bridging, Video Broadcast Equipment, Military and Aerospace Signal Processing, ASIC Prototyping and Emulation, Medical Imaging Systems.
Telecom Baseband Processing
The EP2AGX190FF35I5G fits telecom baseband processing because of its 181,165 logic elements, 12 multi-gigabit transceivers, and dedicated hard IP for CPRI, OBSAI, and Serial RapidIO. Place the device between baseband ASICs and the RF front-end, using SERDES lanes to backhaul digitized samples at line rates up to 3.75 Gbps per channel. Industrial temperature rating ensures reliable operation in outdoor base stations and remote radio heads where ambient swings are common.
推薦
High-Speed Serial Interface Bridging
The 12 multi-gigabit transceivers make the EP2AGX190FF35I5G well suited as a protocol bridge between PCIe Gen2, XAUI, Serial RapidIO, and custom serial links. With 612 user I/O plus 12 SERDES lanes, a single device can replace multiple smaller FPGAs in fan-out cards. Industrial temperature rating also lets the same design operate in defense and avionics protocol-conversion racks without redesign.
推薦
Video Broadcast Equipment
The EP2AGX190FF35I5G drives broadcast video systems such as SDI routers, multiviewers, and format converters because of its 9.7 Mbit on-chip memory, 181,165 logic elements, and plentiful LVDS-capable I/O. Embed clock domain crossing and frame buffering in the M9K blocks to minimize external SDRAM pressure. Industrial temperature rating supports centralized head-end installations where rack cooling may be limited.
推薦
Military and Aerospace Signal Processing
The EP2AGX190FF35I5G suits defense applications such as radar digitizers, electronic warfare subsystems, and secure communications because of its industrial temperature rating, 40 nm low-power process, and certified reliability flow. The 1152-ball FC-FBGA withstands high-vibration mounting when properly underfilled, and Altera/Intel's military pedigree includes long-term program support. Designers can implement real-time FFT, channelization, and crypto offload entirely on-chip.
推薦
ASIC Prototyping and Emulation
With 181,165 logic elements and abundant on-chip memory, the EP2AGX190FF35I5G emulates mid-complexity ASICs, especially designs dominated by bus fabrics, FIFOs, and custom peripherals. The 8-bit ALM architecture is backward-compatible with 4-input LUT designs, simplifying migration from older ASIC prototypes. Industrial temperature rating also lets prototype boards sit beside production hardware in accelerated life-test chambers.
推薦
Medical Imaging Systems
The EP2AGX190FF35I5G is well matched to medical imaging front-ends such as ultrasound beamformers, CT reconstruction pipelines, and endoscopy video processors. Its 12 transceivers aggregate raw data from high-speed ADCs, while 9.7 Mbit on-chip memory buffers line scan data before downstream processing. Industrial temperature rating also accommodates the wider thermal envelope of cart-based and portable diagnostic equipment.
推薦
推薦產品摘要
工程參考資料，適用於 EP2AGX190FF35I5G — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | EP2AGX190FF35I3G | EP2AGX190FF35I5 | EP2AGX190FF35I3N | EP2AGX190FF35C6G | EP2AGX190FF35C5G | EP2AGX190FF35C4G |
|---|---|---|---|---|---|---|---|
| Package | 1152-BBGA, FC-FBGA | 1152-BBGA, FC-FBGA - same | 1152-BBGA, FC-FBGA - same | 1152-BBGA, FC-FBGA - same | 1152-BBGA, FC-FBGA - same | 1152-BBGA, FC-FBGA - same | 1152-BBGA, FC-FBGA - same |
| Brand | Intel | Intel | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 181,165 | 181,165 - same | 181,165 - same | 181,165 - same | 181,165 - same | 181,165 - same | 181,165 - same |
| Embedded Memory (bits) | 10,177,536 | 10,177,536 - same | 10,177,536 - same | 10,177,536 - same | 10,177,536 - same | 10,177,536 - same | 10,177,536 - same |
| User I/O | 612 | 612 - same | 612 - same | 612 - same | 612 - same | 612 - same | 612 - same |
| Speed Grade | I5 | I3 (faster) | I5 - same | I3 (faster, Pb-free N rev) | C6 (faster, commercial) | C5 (commercial) | C4 (commercial) |
| Operating Temperature | -40C to +100C (Industrial) | -40C to +100C (Industrial) | -40C to +100C (Industrial) | -40C to +100C (Industrial) | 0C to +85C (Commercial) | 0C to +85C (Commercial) | 0C to +85C (Commercial) |
| Pb-free / RoHS | Pb-free (G suffix) | Pb-free (G suffix) | SnPb (no G suffix) | Pb-free (N rev) | Pb-free (G suffix) | Pb-free (G suffix) | Pb-free (G suffix) |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | NRND | NRND |
| Process Technology | 40 nm | 40 nm - same | 40 nm - same | 40 nm - same | 40 nm - same | 40 nm - same | 40 nm - same |
主要差異化特點
- Highest user I/O count in the FF35 family (對比EP2AGX190EF29I5G)
- Industrial temperature rating vs commercial-only alternatives (對比EP2AGX190FF35C5G)
- Faster speed grade available as drop-in (對比EP2AGX190FF35I3G)
設計說明
The 1152-ball FC-FBGA package dissipates significant heat at full utilization of 181,165 logic elements plus 12 transceivers. Estimate: at 0.9 V core with typical logic toggling, internal dissipation can exceed 5 W, plus transceiver power of 100-300 mW per lane. Mount a thermal management solution (heat spreader, heatsink, or forced airflow) per Arria II GX Device Handbook thermal guidelines; otherwise junction temperature can overshoot the +100C industrial limit.
The 1152-ball FC-FBGA requires a high-layer-count PCB (typically 12-16 layers) with microvia-in-pad or stacked-microvia construction for breakout. Route differential SERDES pairs with 100 ohm differential impedance and length-matched within 150 mil per the Arria II GX transceiver layout guidelines. Provide continuous ground planes beneath the BGA for return-path integrity and to control SSO noise on the 612 user I/O.
Do not assume pin-compatibility between FF35 (1152-ball) and EF29 (780-ball) packages - they share the same die but have completely different pinouts. Verify the exact order code suffix carefully when sourcing: 'I' = industrial temp, 'C' = commercial, the trailing number (3/4/5/6/7) = speed grade (higher is faster), 'G' = Pb-free, 'N' = Pb-free newer revision. Mixing up speed grades causes timing closure failures; mixing up packages causes layout rework.
Estimated: total power budget at full utilization is approximately 8-12 W. The device requires multiple supply rails (0.9 V core, 1.1 V/1.2 V/1.5 V/2.5 V/3.0 V for transceiver PLL and I/O groups, plus 1.5 V/1.8 V DDR2/DDR3 reference). Use Altera's PowerPlay Early Power Estimator spreadsheet to size regulators before schematic capture. Decoupling must follow the per-bank capacitor count listed in the Arria II GX pin connection guidelines.
Place reference clocks near their associated transceiver banks and route them with controlled 50 ohm single-ended impedance; AC-couple the SERDES lines per the protocol-specific reference design. Keep JTAG and configuration pins (nCONFIG, nSTATUS, CONF_DONE, MSEL) accessible for in-system programming via the JTAG header or EPCS configuration device. Use the Quartus II pin planner with the FF35 FF1152 package file to validate pin assignments before layout.
合規資訊
G suffix in the order code indicates Pb-free lead finish per JEDEC J-STD-609; RoHS and REACH compliance was not present in the verified web data and is marked unknown. AEC-Q100 is not applicable to FPGAs. Confirm compliance with Intel's product declaration documents before regulated designs.
