EP3SE260F1517C4N - Stratix III E FPGA 16.7M Gates 1517-BGA | Intel
MPN: EP3SE260F1517C4N ✗ Cuối đờiEP3SE260F1517C4N Tóm tắt
What is an FPGA? A Field-Programmable Gate Array is a type of programmable logic device (PLD) - part of the semiconductor hierarchy of programmable logic -> logic IC -> integrated circuit. Unlike fixed-function ASICs, an FPGA contains an array of configurable logic blocks (CLBs/LABs), routing interconnect, embedded memory blocks, DSP blocks, and high-speed transceivers that the engineer can program after manufacturing using a hardware description language (HDL) such as VHDL or Verilog. FPGAs are widely used for prototyping, low-volume production, and applications that demand hardware-level parallelism.
Key features of the EP3SE260F1517C4N include 976 maximum user I/Os, 16,672,768 embedded memory bits, 255,000 logic elements, and up to 10,200 LABs. The 1517-FCBGA package supports high I/O density and signal-integrity routing for multi-gigabit transceivers and external memory interfaces such as DDR3/QDRII+.
The Stratix III E family uses a low-power 65 nm process with programmable power technology, allowing unused logic and routing to be powered down. The device supports up to 12.5 Gbps transceivers and up to 800 MHz on-chip memory, making it suitable for high-bandwidth applications such as wireline communications, ASIC prototyping, and high-end test-and-measurement.
Typical applications include ASIC prototyping and emulation, high-speed serial protocol bridging (PCIe Gen2, Serial RapidIO, SFI-5.1), broadcast video processing, military/aerospace signal processing, and high-performance DSP for radar or medical imaging. Its 976 user I/Os and large memory footprint also fit telecom line-card designs.
When designing with this FPGA, plan power delivery carefully: the device requires multiple voltage rails (0.9 V core, 1.1 V/1.2 V/1.5 V/2.5 V/3.3 V I/O and transceiver supplies) with strict decoupling and sequence requirements. Use the Quartus II design software for HDL synthesis, place-and-route, and timing closure.
This page synthesizes distributor pricing, drop-in same-package alternatives from the Stratix III E family, and practical notes not found in the manufacturer datasheet.
Bộ thay thế dễ dàng lắp đặt cho EP3SE260F1517C4N — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EP3SE260F1517C4N (cùng hình factor và footprint) — khác nhau ở Speed Grade, Package, Family, Operating Temperature, Operating Temperature Grade.
EP3SE260F1517C4LN
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →EP3SE260F1517C4L
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →EP3SE260F1517C4
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →EP3SE260F1517C3N
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →EP3SE260F1517C3
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →EP3SE260F1517C2N
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →EP3SE260F1517C4N Tỷ lệ tối đa & tính chất điện
| Series | Stratix® III E |
| Family | Field-Programmable Gate Array (FPGA) |
| Logic Elements | 255,000 |
| Embedded Memory | 16,672,768 bits |
| Logic Array Blocks (LABs) | 10,200 |
| Maximum User I/Os | 976 |
| Hộp | 1517-BBGA, FCBGA |
| Kiểu lắp đặt | Surface Mount |
| Nhiệt độ hoạt động | 0°C to 85°C |
| Core Voltage | 0.9 V |
| Process Node | 65 nm |
| Maximum Transceiver Data Rate | 12.5 Gbps |
Hướng dẫn cấu hình chân EP3SE260F1517C4N 1517-bbga, fcbga
Cấu hình chân cho EP3SE260F1517C4N (1517-bbga, fcbga gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho EP3SE260F1517C4N.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
EP3SE260F1517C4N phù hợp cho 6 Áp dụngs: ASIC Prototyping and Emulation, High-Speed Serial Protocol Bridging, Military and Aerospace Signal Processing, Broadcast Video Processing, High-Performance DSP for Radar/Medical Imaging, Industrial Test and Measurement.
ASIC Prototyping and Emulation
The EP3SE260F1517C4N's 255,000 logic elements and 16.7 Mbit embedded memory make it ideal for ASIC prototyping where designers partition their ASIC netlist into multiple FPGAs. With 976 user I/Os the device exposes enough pins to map wide on-chip buses between FPGA partitions. Compared to ASIC tape-out, the 65 nm Stratix III silicon cuts prototyping cost by orders of magnitude while running at usable MHz speeds for software validation. Designers use Quartus II synthesis and the TimeQuest timing analyzer to verify critical paths before committing to mask sets.
Được đề xuất
High-Speed Serial Protocol Bridging
The Stratix III E transceivers support up to 12.5 Gbps, which lets the EP3SE260F1517C4N bridge PCIe Gen2, Serial RapidIO, SFI-5.1, and 10G/40G Ethernet interfaces in telecom line cards. The 16.7 Mbit embedded memory absorbs packet bursts and aligns data across clock domains. Using the 1517-ball FCBGA with 976 user I/Os, designers route multiple SFP+ cages and external PHY interfaces without I/O starvation. Cyclone III HDL reference designs simplify PMA layer bring-up.
Được đề xuất
Military and Aerospace Signal Processing
The EP3SE260F1517C4N's 255K logic elements, embedded DSP blocks, and 976 I/Os support radar baseband processing, software-defined radio (SDR), and electronic-warfare signal chains. The 65 nm low-power Stratix III E architecture reduces thermal load in sealed enclosures where convection cooling is impossible. For Mil/Aero applications the commercial 0-85°C grade is acceptable in benign environments; extended-temperature parts (I-suffix variants) are required for avionics. Designers pair the FPGA with high-speed ADCs and DACs to digitize RF spectra.
Được đề xuất
Broadcast Video Processing
The Stratix III E EP3SE260F1517C4N supports uncompressed 3G-SDI / HD-SDI video pipelines with built-in transceivers and rich on-chip SRAM for line/frame buffers. Its 255K logic elements run real-time de-interlacing, scaling, and chroma keying across multiple video streams, while 976 user I/Os route multiple SDI inputs/outputs, HDMI bridges, and external DDR3 frame stores. Quartus II Video and Image Processing IP cores accelerate time-to-market for broadcast switchers and production switchers.
Được đề xuất
High-Performance DSP for Radar/Medical Imaging
The EP3SE260F1517C4N's 255K logic elements combined with dedicated DSP blocks perform FFTs, FIR filtering, and beamforming in ultrasound, MRI, and radar imaging front-ends. The 16.7 Mbit embedded memory holds coefficient tables and intermediate FFT bins without external memory round-trips, reducing latency to a few microseconds. With 976 user I/Os the FPGA connects to high-speed ADC/DAC lanes (e.g., 14-bit 250 MSPS converters) for real-time signal capture and processing.
Được đề xuất
Industrial Test and Measurement
The EP3SE260F1517C4N is used in high-end logic analyzers, protocol testers, and bit-error-rate testers (BERT) where 255K logic elements implement parallel pattern detection, scrambling, and 8b/10b encoding across hundreds of test channels. The 976 user I/Os interface to multi-channel probe heads, while the 12.5 Gbps transceivers drive high-speed serial links under test. Quartus II SignalTap II logic analyzer IP enables on-chip signal capture without external scopes.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EP3SE260F1517C4N — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | EP3SE260F1517C4LN | EP3SE260F1517C4L | EP3SE260F1517C4 | EP3SE260F1517C3N | EP3SE260F1517C2N | XC6VLX760-1FF1760 |
|---|---|---|---|---|---|---|---|
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Xilinx |
| Package | 1517-BBGA, FCBGA | 1517-BBGA, FCBGA (same) | 1517-BBGA, FCBGA (same) | 1517-BBGA, FCBGA (same) | 1517-BBGA, FCBGA (same) | 1517-BBGA, FCBGA (same) | 1760-BBGA, FFG (different) |
| Logic Elements | 255,000 | 255,000 | 255,000 | 255,000 | 255,000 | 255,000 | 758,000 logic cells |
| Maximum User I/Os | 976 | 976 | 976 | 976 | 976 | 976 | 1200 |
| Speed Grade | C4 (fastest) | C4 | C4 | C4 | C3 | C2 | -1 |
| Operating Temperature | 0°C to 85°C (commercial) | 0°C to 85°C | 0°C to 85°C | 0°C to 85°C | 0°C to 85°C | 0°C to 85°C | 0°C to 85°C |
Bảo phân biệt quan trọng
- Highest speed grade (C4) in the Stratix III E 260K-LE family (vsEP3SE260F1517C3N)
- Largest I/O count Stratix III E option (1517-ball, 976 user I/Os) (vsEP3SE260F1152C4N)
- Cross-brand migration path with higher logic density (vsXilinx XC6VLX760-1FF1760)
Ghi chú thiết kế
The Stratix III E EP3SE260F1517C4N requires multiple supply rails - 0.9 V core (VCC), VCCA (1.1 V PLL analog), and configurable VCCIO for each I/O bank (1.2 V/1.5 V/1.8 V/2.5 V/3.3 V). Decoupling per the Stratix III Device Handbook demands bulk capacitors of 220 uF per rail plus high-frequency 0.1 uF and 1 nF ceramics placed as close as possible to each power pin. Power sequencing requires VCCIO before VCC ramp, and the POR (power-on-reset) circuitry monitors the VCC ramp before releasing configuration logic.
In the 1517-ball FCBGA, the thermal slug is on the underside of the BGA and must be soldered to a thermal via array in the PCB top layer. At 65 nm the device can dissipate up to ~20 W in worst-case utilization; without adequate thermal vias the junction can exceed 125 C. Use at least 4 layers of 1 oz copper dedicated to thermal spreading, with a thermal via array in the BGA center pad that drops to an internal ground plane with stitched vias.
Route the high-speed transceiver channels (12.5 Gbps capable) using stripline geometry with 100 ohm differential impedance. Use the Quartus II board-level signal integrity tool to validate via stubs; back-drilling vias below the AC coupling capacitor is recommended when stubs exceed 100 mil. The 1517-ball FCBGA escape requires microvia (laser-drilled) stack-ups; standard 8-mil/12-mil through-via escape is too coarse for the 1 mm BGA pitch.
Estimated: Quartus II software is required for synthesis, place-and-route, and configuration. Quartus Prime 16.x is the last version with full Stratix III support - do not attempt to compile this device in newer Quartus versions targeting Stratix 10 only. Configuration via JTAG, Active Serial (EPCS), or Fast Passive Parallel must match the selected MSEL pin strapping on the board. Do not confuse EP3SE (Stratix III E) with EP3SL (Stratix III L) - they are different families with different logic densities and memory blocks.
Thông tin tuân thủ
EP3SE260F1517C4N is a Stratix III E FPGA in NRND status. Base C4N suffix indicates non-lead-free per legacy Altera convention. Lead-free variants carry LN or L suffix (e.g., EP3SE260F1517C4LN). RoHS/REACH data was not present in the verified distributor pages and is marked unknown. Not AEC-Q100 qualified (FPGA is not a discrete automotive-grade part).
