Texas Instruments

INA253A2IPW - 80V Bidirectional Current Sense Amp | TI

MPN: INA253A2IPW ✓ Hoạt động
2.7 V to 5.5 V Vdss 1.8 mA Id 2 mΩ Rds(on) 20-pin TSSOP (PW) Package
MOQ: 1 |

INA253A2IPW Tóm tắt

The Texas Instruments INA253A2IPW is a bidirectional, zero-drift current-shunt monitor with an integrated 2 mΩ shunt resistor, 200 mV/A gain, and a 20-pin TSSOP package. It operates from a 2.7 V to 5.5 V supply while monitoring common-mode voltages from -4 V to +80 V. The device combines precise current measurement with PWM rejection in a single surface-mount IC.

A current-sense amplifier is an instrumentation amplifier that measures the small voltage generated across a shunt resistor and converts it into a proportional output voltage. The INA253 belongs to the current-sense amplifier hierarchy, where it bridges precision analog measurement and power-system monitoring. Integrating the shunt resistor reduces external component count and helps standardize the sensing element for bidirectional current applications.

Key electrical features include 350 kHz -3 dB bandwidth, 2.4 V/µs slew rate, 90 pA input bias current, and 1.8 mA supply current. The A2 gain version produces 200 mV/V output for each ampere of sensed current. Its wide -4 V to +80 V common-mode range allows the shunt path to operate at high bus voltages while the amplifier itself remains powered from a low-voltage supply.

Internally, the zero-drift architecture supports low offset behavior in precision measurement systems. The integrated precision shunt and chopper-stabilized amplifier are designed for systems where board space, component count, and current-direction measurement are important. Because the sensing element is integrated, PCB design should preserve the manufacturer-recommended current-path geometry and thermal conditions.

Typical applications include motor-drive phase current monitoring, industrial power-supply control, battery current measurement, solenoid current sensing, and LED driver feedback. The -4 V to +80 V common-mode capability is particularly useful in systems where a shunt can be placed in a high-voltage conductor while the INA253 remains connected to a 2.7 V to 5.5 V control supply.

Use the pin-description table in the manufacturer datasheet when assigning PCB tracks, especially for IN+, IN−, REF, OUT, and supply connections. Account for shunt heating at sustained high current and place input and reference components close to the device to minimize added error and pickup from fast-switching nodes.

This page organizes the electrical characteristics, application guidance, confirmed family alternatives, and design trade-offs of the INA253A2IPW. It helps engineers distinguish what the integrated 2 mΩ solution provides from lower-current sensing approaches and from gain variants in the same INA253 family.

Bộ thay thế dễ dàng lắp đặt cho INA253A2IPW — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với INA253A2IPW (cùng hình factor và footprint) — khác nhau ở Common-Mode Voltage Range, Gain, Operating Temperature Range, Output Type, Product Type.

Texas Instruments
Common-Mode Voltage Range: -4 V to 80 V
Gain: 50 V/V
Operating Temperature Range: -40°C to 125°C
So sánh với INA253A2IPW →

Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.

Yêu cầu các bộ thay thế

INA253A2IPW Tỷ lệ tối đa & tính chất điện

Product Type Bidirectional zero-drift current-shunt monitor
Integrated Shunt Resistance 2 mΩ
Gain 200 mV/V
Supply Voltage Range 2.7 V to 5.5 V
Common-Mode Voltage Range -4 V to +80 V
Signal Bandwidth 350 kHz at -3 dB
Slew Rate 2.4 V/µs
Điện áp cung cấp 1.8 mA
Input Bias Current 90 pA
Khoảng nhiệt độ hoạt động -40 °C to +125 °C
Number of Circuits 1
Hộp 20-pin TSSOP (PW)
Package Width 4.40 mm
Kiểu lắp đặt Surface mount
Kiểu đầu ra Voltage output
Current Direction Bidirectional

Hướng dẫn cấu hình chân INA253A2IPW 4.40 mm

Cấu hình chân cho INA253A2IPW (4.40 mm gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 4.40 mm cho INA253A2IPW

Không có dữ liệu chân cụ thể sẵn có cho INA253A2IPW.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

INA253A2IPW phù hợp cho 6 Áp dụngs: Motor Phase Current Monitoring, Industrial Power-Supply Control, Battery Current Sensing, Solenoid and Relay Current Detection, LED Driver Feedback, High-Side Power-Path Monitoring.

🏭

Motor Phase Current Monitoring

The INA253A2IPW fits motor-controller phase sensing because its -4 V to +80 V common-mode range accommodates powered phase conductors while the amplifier operates from 2.7 V to 5.5 V. Place the integrated sensing path in series with the conductor and feed OUT to the controller ADC. The 200 mV/V gain produces 0.2 V per ampere, while the 350 kHz bandwidth captures switching transients. PWM rejection helps reduce unwanted disturbance, but the final input filter and isolation strategy must match the power stage.

⚡

Industrial Power-Supply Control

For industrial power conversion, the INA253A2IPW can provide a compact current-feedback signal without an external shunt. Its integrated 2 mΩ element is suitable where the monitored conductor remains within the -4 V to +80 V common-mode range. The 200 mV/V scaling allows a controller or ADC to reconstruct current from the output voltage. Design the PCB current path for low resistance and sufficient copper area, and verify the shunt temperature rise at the maximum continuous load.

⚡

Battery Current Sensing

The INA253A2IPW supports bidirectional battery current measurement when the battery bus remains inside its -4 V to +80 V common-mode range. The internal 2 mΩ shunt simplifies the sensing path, and the 200 mV/V gain provides a direct analog representation of charge or discharge current. At 10 A, the shunt dissipates an estimated 0.2 W, which makes conductor width, copper area, and thermal verification important. The output reference should be configured according to the manufacturer pin table.

🔧

Solenoid and Relay Current Detection

The INA253A2IPW can detect current through a solenoid or relay winding when switching edges occur within the supported common-mode range. Its 2.4 V/µs slew rate and 350 kHz bandwidth permit the output to follow reasonably fast current events, while the integrated shunt avoids an external sensing element. Keep the high di/dt conductor away from REF and signal traces, use a stable reference implementation, and confirm that continuous dissipation and startup current remain below the device's absolute limits.

💡

LED Driver Feedback

The INA253A2IPW is suitable for current-regulated LED drivers when the high-side conductor falls within the -4 V to +80 V range. Its 200 mV/V gain allows the controller to compare a scaled current signal against a reference and adjust power delivery. Because the LED current may remain continuous, calculate shunt heating from I²R and maintain copper around the current path. The 1.8 mA supply current also helps preserve efficiency in low-power lighting systems.

🖥️

High-Side Power-Path Monitoring

The INA253A2IPW supports high-side monitoring because its common-mode input range extends to +80 V independently of the 2.7 V to 5.5 V amplifier supply. This separation enables measurement from a higher-voltage bus while the controller remains at a lower voltage. Route the high-current path with minimal resistance, keep sensitive reference connections compact, and use the manufacturer pin table to establish supply, output, and reference behavior. Confirm absolute maximum ratings for transients beyond the normal operating range.

What is the INA253A2IPW?
The INA253A2IPW is a Texas Instruments bidirectional current-shunt monitor with an integrated 2 mΩ shunt resistor, 200 mV/V gain, and a 20-pin TSSOP package. According to the manufacturer datasheet, it monitors currents with a -4 V to +80 V common-mode range while operating from a 2.7 V to 5.5 V supply. Its zero-drift architecture, integrated shunt, and PWM rejection make it suitable for compact, precise power-path monitoring.
What is the operating voltage range of INA253A2IPW?
The INA253A2IPW operates from a 2.7 V minimum supply voltage to a 5.5 V maximum supply voltage. According to the Texas Instruments manufacturer datasheet, its input common-mode range is much wider at -4 V to +80 V. This separation allows the device to monitor a high-voltage current path while its amplifier and output remain referenced to a low-voltage control supply.
How does the INA253A2IPW measure bidirectional current?
The INA253A2IPW senses the voltage developed across its integrated 2 mΩ shunt and produces a proportional output voltage for positive or negative current. The A2 gain is 200 mV/V, corresponding to 200 mV of output per ampere. According to the manufacturer datasheet, the REF pin establishes the output reference for bidirectional measurements without requiring a separate external shunt.
Where can I download the INA253A2IPW datasheet PDF?
The official INA253A2IPW technical information is available through the Texas Instruments product page and its linked manufacturer datasheet. The product page identifies the exact INA253A2IPW ordering option as a 20-pin TSSOP device. Use the pin-description and electrical-characteristics tables there when assigning PCB connections and checking the 350 kHz bandwidth, 2.4 V/µs slew rate, and operating limits.
Where is the INA253A2IPW pinout located?
The INA253A2IPW pinout is defined by the pin-configuration diagram in the Texas Instruments manufacturer datasheet for the 20-pin TSSOP (PW) package. Use that table to identify supply, ground, input, reference, and output connections before laying out the PCB. The package has 20 pins, so a complete pin list requires assigning every numbered lead and confirming exposed-pad treatment where applicable.
What are the key specifications of INA253A2IPW that engineers should know?
The principal INA253A2IPW specifications are a 2 mΩ integrated shunt, 200 mV/V gain, 2.7 V to 5.5 V supply range, and -4 V to +80 V common-mode range. The manufacturer datasheet also specifies 350 kHz -3 dB bandwidth, 2.4 V/µs slew rate, 90 pA input bias current, 1.8 mA supply current, and operation from -40 °C to +125 °C.
What is the best drop-in replacement for INA253A2IPW?
No confirmed cross-manufacturer drop-in replacement is established for the INA253A2IPW. The INA253A1IPW and INA253A3IPWR are pin-compatible family members, but their gains differ from the target's 200 mV/V, so changing them can alter output scaling and calibration. For a true replacement, require the same 20-pin TSSOP pinout, 200 mV/V gain, 2 mΩ shunt, 2.7 V to 5.5 V supply, and -4 V to +80 V common-mode range.
What can replace INA253A2IPW?
The closest confirmed family replacements are the INA253A1IPW and INA253A3IPWR, both using the INA253 family's 20-pin TSSOP architecture. The INA253A1IPW uses 100 mV/V gain, while the INA253A3IPWR uses 400 mV/V gain. Neither is an electrical drop-in substitute for the 200 mV/V INA253A2IPW without recalibrating the measurement chain.
Is INA253A2IPW the same as INA253A1IPW?
No. The INA253A2IPW has 200 mV/V gain, while the INA253A1IPW has 100 mV/V gain. Although both are bidirectional INA253-family current monitors with an integrated 2 mΩ shunt and 20-pin TSSOP package, the output voltage for a given current differs by a factor of two. Existing firmware, analog scaling, limits, and calibration must therefore be reviewed before substitution.
INA253A2IPW vs INA253A3IPWR — which is better for motor monitoring?
The INA253A2IPW is generally preferable when 200 mV/V output scaling is appropriate, while the INA253A3IPWR provides 400 mV/V for applications seeking twice the output voltage per ampere. Both support bidirectional measurement and the same 20-pin TSSOP package. Selection should follow the analog headroom, ADC range, current limit, and firmware scaling rather than package compatibility alone.
When should I choose INA253A2IPW over a discrete shunt amplifier?
Choose the INA253A2IPW when a compact bidirectional measurement, minimal component count, and a high-voltage common-mode range are priorities. Its integrated 2 mΩ shunt and 200 mV/V amplifier remove the need for a separate shunt and gain network. A discrete solution may offer a different shunt value, higher current capacity, lower cost, or narrower bandwidth when those priorities outweigh integration.
Is INA253A2IPW suitable for high-voltage motor phase current?
The INA253A2IPW is suitable for motor phase-current monitoring when its -4 V to +80 V common-mode range covers the phase node and its 350 kHz bandwidth handles the required transient content. According to the manufacturer datasheet, the amplifier operates from 2.7 V to 5.5 V and has PWM rejection. The power stage must also remain within the device's absolute maximum ratings and thermal limits.
Does INA253A2IPW require a heatsink?
Heatsink requirements depend on the current path, ambient temperature, PCB copper area, and allowable junction temperature rather than the amplifier supply alone. The integrated shunt is 2 mΩ, so its dissipating current is I²R; at 20 A the shunt alone dissipates an estimated 0.8 W. Provide copper around the current-carrying pins and verify temperature rise under the worst sustained-load condition.
Where can I buy INA253A2IPW online?
Use the Request a Quote form on this page to request INA253A2IPW pricing, stock confirmation, and lead time from XAIPART. The exact device is the 20-pin TSSOP version, so quote the complete MPN INA253A2IPW to avoid confusion with reel-ordering suffixes or other INA253 gain options. The manufacturer lists the device under the INA253 product family.
What is the price and lead time of INA253A2IPW?
Current price and lead time for INA253A2IPW are obtained through the Request a Quote form on this page. The quote should identify the exact 20-pin TSSOP ordering option, desired quantity, shipment destination, and production schedule. This avoids confusion with other INA253 gain variants or packaging suffixes and allows stock and delivery information to be matched to the requested assembly quantity.
Is INA253A2IPW in stock?
Current INA253A2IPW inventory is confirmed through the Request a Quote form on this page. Enter the required quantity and packaging preference so the response reflects the exact 20-pin TSSOP device rather than a related gain option or reel-ordering suffix. For production planning, include forecast quantities and requested delivery dates when requesting the quotation.

Dữ liệu tham khảo kỹ thuật cho INA253A2IPW — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the INA253A2IPW when a bidirectional 200 mV/V measurement with an integrated 2 mΩ shunt is required and the monitored conductor remains within -4 V to +80 V. Its 2.7 V to 5.5 V supply range and 350 kHz bandwidth suit compact control systems that need fast current feedback. The INA253A1IPW is preferable when lower output scaling is desired; the INA253A3IPWR is preferable when twice the output voltage per ampere improves ADC utilization. Neither gain variant is an electrical drop-in substitute without changing scaling or calibration. For designs requiring a different shunt resistance, greater current capacity, or a different pinout, evaluate a discrete shunt and instrumentation amplifier rather than forcing a package-only replacement.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này
Package 20-pin TSSOP (PW)
Brand Texas Instruments
Integrated Shunt Resistance 2 mΩ
Gain 200 mV/V
Supply Voltage Range 2.7 V to 5.5 V
Common-Mode Voltage Range -4 V to +80 V
Signal Bandwidth 350 kHz at -3 dB
Slew Rate 2.4 V/µs
Supply Current 1.8 mA
Input Bias Current 90 pA

Bảo phân biệt quan trọng

  • Combines an integrated precision shunt and gain stage (vsDiscrete shunt plus instrumentation-amplifier circuit)
  • Wide common-mode range relative to its low supply voltage (vsINA253A1IPW)
  • Balanced signal bandwidth and slew performance (vsINA253A3IPWR)

Ghi chú thiết kế

Estimated: using the integrated 2 mΩ shunt resistance, the shunt dissipation is I²R. At 20 A, the calculated loss is 0.8 W; at 10 A, it is 0.2 W. Use these values as initial thermal estimates, then verify the final rise with the actual PCB copper area, ambient temperature, and enclosure. Keep the high-current path short and wide, and avoid thermal coupling to precision reference components.

Assign IN+, IN−, supply, ground, REF, and OUT connections strictly from the manufacturer pin-description table. Place the shunt current path so its geometry provides the intended low resistance and thermal spreading. Keep REF components and output routing away from the switching-current conductor, use a compact ground return, and provide adequate copper around the TSSOP power and ground pins to limit parasitic resistance.

The 350 kHz -3 dB bandwidth makes the INA253A2IPW capable of responding to fast current edges, but excessive high-frequency energy can increase output ringing or reduce usable resolution. Route OUT directly toward the receiving ADC or comparator, minimize loop area, and place any input or reference filtering according to the manufacturer guidance. Validate filtering against the required response time because excessive capacitance or resistance can degrade control-loop behavior.

Do not treat the -4 V to +80 V common-mode rating as permission to exceed the absolute maximum ratings during faults. Verify surge, inductive kick, and supply-transient conditions at the circuit level. Also avoid assuming that another INA253 gain option is a drop-in substitute: changing from 200 mV/V to 100 mV/V or 400 mV/V changes ADC scaling, saturation margin, and firmware calibration.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

No specific RoHS, REACH, automotive-qualification, lead-free, halogen-free, or conflict-minerals statements appear in the cited product information. The INA253A2IPW is an industrial current-sense amplifier, so AEC-Q100 status is treated as not applicable.

Dữ liệu được xác minh vào: 2026-11-19 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

INA253A2IPW datasheet INA253A2IPW pinout INA253A2IPW datasheet pdf INA253A2IPW equivalent INA253A2IPW replacement INA253A2IPW cross reference INA253A2IPW vs INA253A1IPW INA253A2IPW vs INA253A3IPWR INA253A2IPW TSSOP footprint INA253A2IPW motor current sensing INA253A2IPW 80V current sense INA253A2IPW price INA253A2IPW stock Texas Instruments INA253A2IPW what is INA253A2IPW

Các bộ phận và thuật ngữ liên quan

Texas Instruments INA253A2IPW INA253A1IPW INA253A3IPWR INA240A4DR current-sense amplifier current-shunt monitor zero-drift amplifier instrumentation amplifier voltage-output amplifier bidirectional current measurement integrated shunt resistor common-mode voltage PWM rejection power supply rejection TSSOP-20 TSSOP package family surface-mount package SMD motor phase current monitoring industrial power supply battery current sensing solenoid current detection LED driver feedback semiconductor
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ