KSZ8091MLXIA - 10/100 Ethernet PHY | Microchip | 48-LQFP
MPN: KSZ8091MLXIA ✓ Hoạt độngKSZ8091MLXIA Tóm tắt
An Ethernet PHY is the physical-layer component in an Ethernet communications system. It converts digital data from a MAC or network controller into electrical signaling for twisted-pair cabling and converts received signaling back into digital data. The KSZ8091 belongs to the hierarchy of Ethernet interface ICs, physical-layer transceivers, network interface controllers, and semiconductor components. It provides the physical link between a digital Ethernet controller and an RJ45 connector through integrated line-driver and receiver functions.
The KSZ8091MLXIA supports both 10BASE-T and 100BASE-TX operation, allowing a system to connect through legacy 10 Mb/s equipment or Fast Ethernet networks. Its single-supply architecture simplifies power-system design, while its power-saving features support portable and space-constrained equipment. The 48-LQFP package provides ample pins for the PHY, supply connections, clock and control interfaces, and exposed copper connection for robust board assembly.
The device is appropriate for industrial controls, factory automation equipment, embedded routers, network switches, test equipment, and consumer Ethernet products. The -40°C to +85°C operating range supports industrial and commercial environments, although the system designer must still observe the limits for supply voltage, magnetic-component selection, cable length, and thermal performance.
A typical implementation places the KSZ8091MLXIA between an Ethernet MAC or MCU with a media-access-control interface and an Ethernet magnetics module connected to an RJ45 jack. Differential transmit and receive pairs are routed as controlled impedance nets between the PHY and magnetics. Component values, termination networks, magnetic-component selection, and layout follow the manufacturer application guidance to preserve compliant signal integrity.
Designers should compare the complete Ethernet subsystem rather than the PHY alone. Magnetics, connector, reference clock, decoupling network, firmware or MAC behavior, and the selected cable determine end-to-end interoperability. Before production release, validate the assembled board for link establishment, packet transfer, error recovery, temperature behavior, and electromagnetic-emissions requirements.
This page consolidates the KSZ8091MLXIA product identity, confirmed operating characteristics, sourcing structure, package constraints, and application guidance. It also distinguishes documented functions from parameters that require confirmation in the manufacturer datasheet, helping engineers plan an Ethernet interface without assuming unverified electrical details.
Bộ thay thế dễ dàng lắp đặt cho KSZ8091MLXIA — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với KSZ8091MLXIA (cùng hình factor và footprint) — khác nhau ở Package.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếKSZ8091MLXIA Thông số kỹ thuật
| Device Type | 10BASE-T/100BASE-TX physical-layer transceiver |
| Ethernet Interface | 1/1 full-duplex 10/100 Ethernet |
| Supported Data Rates | 10 Mb/s and 100 Mb/s |
| Cable Standard | CAT-5 unshielded twisted pair |
| Supply Architecture | Single supply |
| Nhiệt độ hoạt động | -40°C to +85°C |
| Hộp | 48-LQFP, 7 mm × 7 mm |
| Kiểu lắp đặt | Surface mount |
| Power-Saving Features | Supported |
Hướng dẫn cấu hình chân KSZ8091MLXIA 48-lqfp, 7 mm × 7 mm
Cấu hình chân cho KSZ8091MLXIA (48-lqfp, 7 mm × 7 mm gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho KSZ8091MLXIA.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
KSZ8091MLXIA phù hợp cho 6 Áp dụngs: Industrial Ethernet Control, Embedded Network Gateway, Test and Measurement Instrument, Factory Automation Module, Network Switch Management Port, Portable Diagnostic Equipment.
Industrial Ethernet Control
The KSZ8091MLXIA fits industrial controllers that need a compact 10/100 Ethernet physical layer for supervisory communication, configuration, and remote monitoring. Its -40°C to +85°C operating range supports extended-temperature factory environments, while 10BASE-T and 100BASE-TX compatibility allows integration with both legacy and Fast Ethernet plant networks. Place the PHY beside its compatible magnetics and RJ45 connector, and route the differential pairs according to the manufacturer reference layout. A MAC-capable microcontroller or controller handles frame processing above the physical layer.
Được đề xuất
Embedded Network Gateway
The KSZ8091MLXIA provides a compact wired-network endpoint for an embedded gateway, serial-to-Ethernet appliance, or service interface. One full-duplex 10/100 interface is sufficient for management traffic and moderate industrial data exchange, and the 48-LQFP footprint simplifies routing around Ethernet magnetics on space-constrained boards. The single-supply PHY architecture reduces power-tree complexity, although the complete board still needs carefully selected bypass capacitance, a suitable clock source, and compliant external magnetics.
Được đề xuất
Test and Measurement Instrument
The KSZ8091MLXIA can add a wired 10/100 Ethernet control or data port to test and measurement equipment. Its extended -40°C to +85°C range allows use in controlled industrial test environments, while support for both 10BASE-T and 100BASE-TX improves interoperability with service equipment and legacy hosts. The PHY requires a companion MAC or processor interface, Ethernet magnetics, and an RJ45 connector. Designers should validate packet integrity, link timing, conducted emissions, and isolation performance in the finished enclosure.
Được đề xuất
Factory Automation Module
The KSZ8091MLXIA is suitable for distributed automation modules that expose configuration, status, and diagnostic data over Ethernet. The 10/100 capability balances link performance with a straightforward embedded interface, and the -40°C to +85°C range supports equipment installed near machinery or process equipment. Keep the PHY and magnetics away from high-current switching nodes, provide a stable reference clock, and observe the differential-routing and return-path guidance in the manufacturer application circuit.
Được đề xuất
Network Switch Management Port
The KSZ8091MLXIA can implement a dedicated management or out-of-band Ethernet port on a switch, access point, or communications appliance. A full-duplex 10/100 interface is useful for configuration, telemetry, and firmware recovery links where gigabit throughput is unnecessary. Using the 48-LQFP package helps consolidate the Ethernet physical layer on a multilayer board, but designers must account for magnetics spacing, isolation, thermal performance, and channel-length margins to preserve reliable links across all supported temperatures.
Được đề xuất
Portable Diagnostic Equipment
The KSZ8091MLXIA supports wired Ethernet connectivity in portable diagnostic and service equipment where a low-power, compact network interface is more useful than wireless operation. Its power-saving features and single-supply architecture help simplify battery- or USB-powered designs, while 100BASE-TX offers useful throughput for configuration and log transfer. System-level energy use still depends on the MAC, magnetics, and selected operating modes, so validate current consumption across link states and standby conditions.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho KSZ8091MLXIA — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Package | 48-LQFP, 7 mm × 7 mm |
| Brand | Microchip Technology |
| Device Type | 10BASE-T/100BASE-TX physical-layer transceiver |
| Ethernet Interface | 1/1 full-duplex |
| Supported Data Rates | 10 Mb/s and 100 Mb/s |
| Cable Support | CAT-5 unshielded twisted pair |
| Supply Architecture | Single supply |
| Operating Temperature | -40°C to +85°C |
| Power-Saving Features | Supported |
| Mounting Type | Surface mount |
Bảo phân biệt quan trọng
- Compact integrated 10/100 Ethernet PHY in a 7 mm by 7 mm LQFP (vsKSZ8041RNL-TR)
- Extended-temperature operation for industrial embedded products (vsKSZ8041MLL-TR)
- Single-supply PHY architecture simplifies system integration (vsKSZ8001LA2TR)
Ghi chú thiết kế
Follow the manufacturer reference layout for the 48-LQFP footprint and Ethernet differential pairs. Keep the PHY, magnetics, and connector placement consistent with the demonstrated application circuit, use a continuous ground reference, and avoid routing the differential lines over discontinuous plane boundaries. High-speed or unrelated switching circuitry should remain away from the receive and reference-clock paths to minimize coupling.
Decouple each applicable supply connection directly at the KSZ8091MLXIA pins and keep the high-frequency return path short. Use the voltage and capacitance values specified in the official application circuit rather than substituting generic bulk capacitors. Confirm startup sequencing, current consumption in normal and power-saving states, and the relationship between the PHY supply and the Ethernet magnetics supply before releasing the power tree.
Do not treat a PHY as a complete Ethernet port. A functioning interface requires pin-compatible magnetics, an appropriate RJ45 connector, a compatible clock source, and a MAC or controller with matching timing and signal levels. Also verify that selected magnetics support both 10BASE-T and 100BASE-TX. Reviewing the complete reference circuit prevents failures caused by isolated component substitutions that appear electrically similar.
Thông tin tuân thủ
The KSZ8091 family description, operating-temperature range, package, and Ethernet functions are confirmed. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation in the current manufacturer product documentation.