KSZ8091MLXIA - 10/100 Ethernet PHY | Microchip | 48-LQFP
料号: KSZ8091MLXIA ✓ 量产中KSZ8091MLXIA 概述
An Ethernet PHY is the physical-layer component in an Ethernet communications system. It converts digital data from a MAC or network controller into electrical signaling for twisted-pair cabling and converts received signaling back into digital data. The KSZ8091 belongs to the hierarchy of Ethernet interface ICs, physical-layer transceivers, network interface controllers, and semiconductor components. It provides the physical link between a digital Ethernet controller and an RJ45 connector through integrated line-driver and receiver functions.
The KSZ8091MLXIA supports both 10BASE-T and 100BASE-TX operation, allowing a system to connect through legacy 10 Mb/s equipment or Fast Ethernet networks. Its single-supply architecture simplifies power-system design, while its power-saving features support portable and space-constrained equipment. The 48-LQFP package provides ample pins for the PHY, supply connections, clock and control interfaces, and exposed copper connection for robust board assembly.
The device is appropriate for industrial controls, factory automation equipment, embedded routers, network switches, test equipment, and consumer Ethernet products. The -40°C to +85°C operating range supports industrial and commercial environments, although the system designer must still observe the limits for supply voltage, magnetic-component selection, cable length, and thermal performance.
A typical implementation places the KSZ8091MLXIA between an Ethernet MAC or MCU with a media-access-control interface and an Ethernet magnetics module connected to an RJ45 jack. Differential transmit and receive pairs are routed as controlled impedance nets between the PHY and magnetics. Component values, termination networks, magnetic-component selection, and layout follow the manufacturer application guidance to preserve compliant signal integrity.
Designers should compare the complete Ethernet subsystem rather than the PHY alone. Magnetics, connector, reference clock, decoupling network, firmware or MAC behavior, and the selected cable determine end-to-end interoperability. Before production release, validate the assembled board for link establishment, packet transfer, error recovery, temperature behavior, and electromagnetic-emissions requirements.
This page consolidates the KSZ8091MLXIA product identity, confirmed operating characteristics, sourcing structure, package constraints, and application guidance. It also distinguishes documented functions from parameters that require confirmation in the manufacturer datasheet, helping engineers plan an Ethernet interface without assuming unverified electrical details.
直接替换替代料: KSZ8091MLXIA ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: KSZ8091MLXIA (相同外形与封装尺寸) ——差异在于 Package.
该产品暂无直接替换替代料。
请求替代料KSZ8091MLXIA 规格参数
| Device Type | 10BASE-T/100BASE-TX physical-layer transceiver |
| Ethernet Interface | 1/1 full-duplex 10/100 Ethernet |
| Supported Data Rates | 10 Mb/s and 100 Mb/s |
| Cable Standard | CAT-5 unshielded twisted pair |
| Supply Architecture | Single supply |
| 工作温度 | -40°C to +85°C |
| 封装 | 48-LQFP, 7 mm × 7 mm |
| 安装类型 | Surface mount |
| Power-Saving Features | Supported |
KSZ8091MLXIA 48-lqfp, 7 mm × 7 mm 引脚配置指南
KSZ8091MLXIA(48-lqfp, 7 mm × 7 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: KSZ8091MLXIA.
请参阅 数据手册 以查看完整引脚配置。
典型应用
KSZ8091MLXIA 适用于 6 应用s: Industrial Ethernet Control, Embedded Network Gateway, Test and Measurement Instrument, Factory Automation Module, Network Switch Management Port, Portable Diagnostic Equipment.
Industrial Ethernet Control
The KSZ8091MLXIA fits industrial controllers that need a compact 10/100 Ethernet physical layer for supervisory communication, configuration, and remote monitoring. Its -40°C to +85°C operating range supports extended-temperature factory environments, while 10BASE-T and 100BASE-TX compatibility allows integration with both legacy and Fast Ethernet plant networks. Place the PHY beside its compatible magnetics and RJ45 connector, and route the differential pairs according to the manufacturer reference layout. A MAC-capable microcontroller or controller handles frame processing above the physical layer.
推荐
Embedded Network Gateway
The KSZ8091MLXIA provides a compact wired-network endpoint for an embedded gateway, serial-to-Ethernet appliance, or service interface. One full-duplex 10/100 interface is sufficient for management traffic and moderate industrial data exchange, and the 48-LQFP footprint simplifies routing around Ethernet magnetics on space-constrained boards. The single-supply PHY architecture reduces power-tree complexity, although the complete board still needs carefully selected bypass capacitance, a suitable clock source, and compliant external magnetics.
推荐
Test and Measurement Instrument
The KSZ8091MLXIA can add a wired 10/100 Ethernet control or data port to test and measurement equipment. Its extended -40°C to +85°C range allows use in controlled industrial test environments, while support for both 10BASE-T and 100BASE-TX improves interoperability with service equipment and legacy hosts. The PHY requires a companion MAC or processor interface, Ethernet magnetics, and an RJ45 connector. Designers should validate packet integrity, link timing, conducted emissions, and isolation performance in the finished enclosure.
推荐
Factory Automation Module
The KSZ8091MLXIA is suitable for distributed automation modules that expose configuration, status, and diagnostic data over Ethernet. The 10/100 capability balances link performance with a straightforward embedded interface, and the -40°C to +85°C range supports equipment installed near machinery or process equipment. Keep the PHY and magnetics away from high-current switching nodes, provide a stable reference clock, and observe the differential-routing and return-path guidance in the manufacturer application circuit.
推荐
Network Switch Management Port
The KSZ8091MLXIA can implement a dedicated management or out-of-band Ethernet port on a switch, access point, or communications appliance. A full-duplex 10/100 interface is useful for configuration, telemetry, and firmware recovery links where gigabit throughput is unnecessary. Using the 48-LQFP package helps consolidate the Ethernet physical layer on a multilayer board, but designers must account for magnetics spacing, isolation, thermal performance, and channel-length margins to preserve reliable links across all supported temperatures.
推荐
Portable Diagnostic Equipment
The KSZ8091MLXIA supports wired Ethernet connectivity in portable diagnostic and service equipment where a low-power, compact network interface is more useful than wireless operation. Its power-saving features and single-supply architecture help simplify battery- or USB-powered designs, while 100BASE-TX offers useful throughput for configuration and log transfer. System-level energy use still depends on the MAC, magnetics, and selected operating modes, so validate current consumption across link states and standby conditions.
推荐
推荐产品汇总
工程参考数据: KSZ8091MLXIA ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Package | 48-LQFP, 7 mm × 7 mm |
| Brand | Microchip Technology |
| Device Type | 10BASE-T/100BASE-TX physical-layer transceiver |
| Ethernet Interface | 1/1 full-duplex |
| Supported Data Rates | 10 Mb/s and 100 Mb/s |
| Cable Support | CAT-5 unshielded twisted pair |
| Supply Architecture | Single supply |
| Operating Temperature | -40°C to +85°C |
| Power-Saving Features | Supported |
| Mounting Type | Surface mount |
关键差异点
- Compact integrated 10/100 Ethernet PHY in a 7 mm by 7 mm LQFP (对比 KSZ8041RNL-TR)
- Extended-temperature operation for industrial embedded products (对比 KSZ8041MLL-TR)
- Single-supply PHY architecture simplifies system integration (对比 KSZ8001LA2TR)
设计说明
Follow the manufacturer reference layout for the 48-LQFP footprint and Ethernet differential pairs. Keep the PHY, magnetics, and connector placement consistent with the demonstrated application circuit, use a continuous ground reference, and avoid routing the differential lines over discontinuous plane boundaries. High-speed or unrelated switching circuitry should remain away from the receive and reference-clock paths to minimize coupling.
Decouple each applicable supply connection directly at the KSZ8091MLXIA pins and keep the high-frequency return path short. Use the voltage and capacitance values specified in the official application circuit rather than substituting generic bulk capacitors. Confirm startup sequencing, current consumption in normal and power-saving states, and the relationship between the PHY supply and the Ethernet magnetics supply before releasing the power tree.
Do not treat a PHY as a complete Ethernet port. A functioning interface requires pin-compatible magnetics, an appropriate RJ45 connector, a compatible clock source, and a MAC or controller with matching timing and signal levels. Also verify that selected magnetics support both 10BASE-T and 100BASE-TX. Reviewing the complete reference circuit prevents failures caused by isolated component substitutions that appear electrically similar.
合规信息
The KSZ8091 family description, operating-temperature range, package, and Ethernet functions are confirmed. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation in the current manufacturer product documentation.