Microchip Technology

KSZ8091MLXIA - 10/100 Ethernet PHY | Microchip | 48-LQFP

MPN: KSZ8091MLXIA ✓ فعال
Single supply Vdss 48-LQFP, 7 mm × 7 mm Package
حداقل سفارش: 1 |

KSZ8091MLXIA نمای کلی

The Microchip Technology KSZ8091MLXIA is a single-supply 10BASE-T/100BASE-TX Ethernet physical-layer transceiver in a 48-LQFP package measuring 7 mm by 7 mm. It supports one 10/100 Ethernet interface, transmits and receives data over standard CAT-5 unshielded twisted-pair cable, and operates across the -40°C to +85°C temperature range. The highly integrated PHY is intended to reduce board space and simplify Ethernet connectivity in embedded systems.

An Ethernet PHY is the physical-layer component in an Ethernet communications system. It converts digital data from a MAC or network controller into electrical signaling for twisted-pair cabling and converts received signaling back into digital data. The KSZ8091 belongs to the hierarchy of Ethernet interface ICs, physical-layer transceivers, network interface controllers, and semiconductor components. It provides the physical link between a digital Ethernet controller and an RJ45 connector through integrated line-driver and receiver functions.

The KSZ8091MLXIA supports both 10BASE-T and 100BASE-TX operation, allowing a system to connect through legacy 10 Mb/s equipment or Fast Ethernet networks. Its single-supply architecture simplifies power-system design, while its power-saving features support portable and space-constrained equipment. The 48-LQFP package provides ample pins for the PHY, supply connections, clock and control interfaces, and exposed copper connection for robust board assembly.

The device is appropriate for industrial controls, factory automation equipment, embedded routers, network switches, test equipment, and consumer Ethernet products. The -40°C to +85°C operating range supports industrial and commercial environments, although the system designer must still observe the limits for supply voltage, magnetic-component selection, cable length, and thermal performance.

A typical implementation places the KSZ8091MLXIA between an Ethernet MAC or MCU with a media-access-control interface and an Ethernet magnetics module connected to an RJ45 jack. Differential transmit and receive pairs are routed as controlled impedance nets between the PHY and magnetics. Component values, termination networks, magnetic-component selection, and layout follow the manufacturer application guidance to preserve compliant signal integrity.

Designers should compare the complete Ethernet subsystem rather than the PHY alone. Magnetics, connector, reference clock, decoupling network, firmware or MAC behavior, and the selected cable determine end-to-end interoperability. Before production release, validate the assembled board for link establishment, packet transfer, error recovery, temperature behavior, and electromagnetic-emissions requirements.

This page consolidates the KSZ8091MLXIA product identity, confirmed operating characteristics, sourcing structure, package constraints, and application guidance. It also distinguishes documented functions from parameters that require confirmation in the manufacturer datasheet, helping engineers plan an Ethernet interface without assuming unverified electrical details.

جایگزین‌های drop-in برای KSZ8091MLXIA — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای KSZ8091MLXIA (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package.

Microchip Technology
Package: 48-pin LQFP, 7 x 7 mm
مقایسه با KSZ8091MLXIA →

هیچ جایگزین مستقیمی برای این محصول موجود نیست.

درخواست جایگزین

KSZ8091MLXIA مشخصات

Device Type 10BASE-T/100BASE-TX physical-layer transceiver
Ethernet Interface 1/1 full-duplex 10/100 Ethernet
Supported Data Rates 10 Mb/s and 100 Mb/s
Cable Standard CAT-5 unshielded twisted pair
Supply Architecture Single supply
دمای کاری -40°C to +85°C
بسته‌بندی 48-LQFP, 7 mm × 7 mm
نوع نصب Surface mount
Power-Saving Features Supported

راهنمای پیکربندی پین KSZ8091MLXIA 48-lqfp, 7 mm × 7 mm

پیکربندی پین برای KSZ8091MLXIA (پکیج 48-lqfp, 7 mm × 7 mm). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 48-lqfp, 7 mm × 7 mm برای KSZ8091MLXIA

داده پین‌آوت تفصیلی موجود نیست برای KSZ8091MLXIA.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

KSZ8091MLXIA مناسب است برای 6 کاربردs: Industrial Ethernet Control, Embedded Network Gateway, Test and Measurement Instrument, Factory Automation Module, Network Switch Management Port, Portable Diagnostic Equipment.

🏭

Industrial Ethernet Control

The KSZ8091MLXIA fits industrial controllers that need a compact 10/100 Ethernet physical layer for supervisory communication, configuration, and remote monitoring. Its -40°C to +85°C operating range supports extended-temperature factory environments, while 10BASE-T and 100BASE-TX compatibility allows integration with both legacy and Fast Ethernet plant networks. Place the PHY beside its compatible magnetics and RJ45 connector, and route the differential pairs according to the manufacturer reference layout. A MAC-capable microcontroller or controller handles frame processing above the physical layer.

🌐

Embedded Network Gateway

The KSZ8091MLXIA provides a compact wired-network endpoint for an embedded gateway, serial-to-Ethernet appliance, or service interface. One full-duplex 10/100 interface is sufficient for management traffic and moderate industrial data exchange, and the 48-LQFP footprint simplifies routing around Ethernet magnetics on space-constrained boards. The single-supply PHY architecture reduces power-tree complexity, although the complete board still needs carefully selected bypass capacitance, a suitable clock source, and compliant external magnetics.

🔧

Test and Measurement Instrument

The KSZ8091MLXIA can add a wired 10/100 Ethernet control or data port to test and measurement equipment. Its extended -40°C to +85°C range allows use in controlled industrial test environments, while support for both 10BASE-T and 100BASE-TX improves interoperability with service equipment and legacy hosts. The PHY requires a companion MAC or processor interface, Ethernet magnetics, and an RJ45 connector. Designers should validate packet integrity, link timing, conducted emissions, and isolation performance in the finished enclosure.

🏭

Factory Automation Module

The KSZ8091MLXIA is suitable for distributed automation modules that expose configuration, status, and diagnostic data over Ethernet. The 10/100 capability balances link performance with a straightforward embedded interface, and the -40°C to +85°C range supports equipment installed near machinery or process equipment. Keep the PHY and magnetics away from high-current switching nodes, provide a stable reference clock, and observe the differential-routing and return-path guidance in the manufacturer application circuit.

🌐

Network Switch Management Port

The KSZ8091MLXIA can implement a dedicated management or out-of-band Ethernet port on a switch, access point, or communications appliance. A full-duplex 10/100 interface is useful for configuration, telemetry, and firmware recovery links where gigabit throughput is unnecessary. Using the 48-LQFP package helps consolidate the Ethernet physical layer on a multilayer board, but designers must account for magnetics spacing, isolation, thermal performance, and channel-length margins to preserve reliable links across all supported temperatures.

📱

Portable Diagnostic Equipment

The KSZ8091MLXIA supports wired Ethernet connectivity in portable diagnostic and service equipment where a low-power, compact network interface is more useful than wireless operation. Its power-saving features and single-supply architecture help simplify battery- or USB-powered designs, while 100BASE-TX offers useful throughput for configuration and log transfer. System-level energy use still depends on the MAC, magnetics, and selected operating modes, so validate current consumption across link states and standby conditions.

What is the KSZ8091MLXIA?
The KSZ8091MLXIA is a Microchip Technology single-supply 10BASE-T/100BASE-TX Ethernet physical-layer transceiver. It supports one full-duplex 10/100 Ethernet interface, communicates over standard CAT-5 unshielded twisted-pair cable, and is packaged in a 48-LQFP measuring 7 mm by 7 mm. According to the manufacturer KSZ8091 product page, it is a highly integrated PHY designed to reduce board space in embedded Ethernet products.
What Ethernet speeds does the KSZ8091MLXIA support?
The KSZ8091MLXIA supports 10 Mb/s and 100 Mb/s Ethernet operation over CAT-5 unshielded twisted pair. Its listing identifies it as a one-channel, full-duplex 10/100 Ethernet transceiver. This makes the device suitable for both legacy 10BASE-T networks and Fast Ethernet infrastructure, while the accompanying media-access controller determines the higher-layer protocol and data handling.
Where can I download the KSZ8091MLXIA datasheet PDF?
The official KSZ8091 documentation is available through the Microchip Technology KSZ8091 product page at https://www.microchip.com/en-us/product/KSZ8091. That page is the appropriate starting point for the current datasheet, pin definitions, electrical characteristics, application circuit, and ordering information. Use the manufacturer PDF for design sign-off because third-party copies can reflect older revisions or incomplete documents.
Where can I find the KSZ8091MLXIA pinout?
Use the pin-description table and package drawing in the official KSZ8091 manufacturer documentation at https://www.microchip.com/en-us/product/KSZ8091. The exact MPN is listed as a 48-LQFP, 7 mm by 7 mm Ethernet interface IC. The package drawing identifies all 48 terminals, while the pin-description table maps each terminal to its supply, ground, control, clock, transmit, and receive function.
What is the operating temperature range of the KSZ8091MLXIA?
The KSZ8091MLXIA is specified for operation from -40°C to +85°C. This range supports industrial, commercial, and extended-temperature embedded networking equipment, provided the assembled system maintains suitable margins around the device and Ethernet magnetics. The manufacturer datasheet should also be consulted for electrical limits, thermal conditions, and any grade-specific requirements that affect a particular production design.
What package does the KSZ8091MLXIA use?
The KSZ8091MLXIA uses a 48-LQFP package with a 7 mm by 7 mm body size. The LQFP provides separate leads on all four sides and supports a higher pin count than compact leadless packages, which is useful for a mixed-signal Ethernet PHY with multiple supply, clock, control, and differential I/O connections. Confirm land-pattern dimensions and exposed-pad details against the official package drawing before layout release.
What is the difference between a PHY and an Ethernet controller?
A PHY handles the physical electrical layer, while an Ethernet controller or MAC handles higher-level frame processing. The KSZ8091MLXIA converts between digital MAC signals and 10BASE-T or 100BASE-TX differential signaling on CAT-5 twisted pair. A separate MAC, microcontroller, or application processor is therefore required to generate and receive Ethernet frames and implement the intended network protocol.
Can the KSZ8091MLXIA connect directly to an RJ45 jack?
The KSZ8091MLXIA normally connects through an Ethernet isolation or magnetics module before the RJ45 jack. Those external components provide common-mode isolation, impedance transformation, surge protection support, and the physical interface expected by standard Ethernet connectors. Follow the manufacturer reference circuit for trace routing, component values, and the selected magnetics to preserve signal integrity and compliance.
What is the best drop-in replacement for the KSZ8091MLXIA?
No verified drop-in replacement can be identified without risking an incompatible PCB or changed Ethernet behavior. A valid replacement must use the same 48-LQFP footprint, maintain pin-to-pin assignments, satisfy the applicable supply and timing requirements, and preserve 10BASE-T and 100BASE-TX operation. Review the manufacturer cross-reference tool and compare the complete datasheets before approving a substitute; use the Request a Quote form for replacement sourcing support.
When should I choose the KSZ8091MLXIA over another 10/100 Ethernet PHY?
Choose the KSZ8091MLXIA when a design needs a compact, integrated 10/100 Ethernet PHY in the specified 48-LQFP footprint and an operating range of -40°C to +85°C. It is especially relevant to embedded equipment requiring CAT-5 twisted-pair connectivity and a single-supply architecture. Select another PHY only when its package, electrical ratings, clocking, interface timing, power consumption, qualification, and lifecycle requirements are demonstrably acceptable.
How do I choose an Ethernet magnetics module for the KSZ8091MLXIA?
Choose Ethernet magnetics that are specified for 10BASE-T and 100BASE-TX operation and compatible with the system’s isolation and impedance requirements. Confirm the supported data rates, supply interfaces, insertion loss, return loss, withstand ratings, and regulatory context with the magnetics manufacturer. The PHY and magnetics form one signal chain, so connector and magnetics choices should be reviewed together rather than treated as interchangeable accessories.
What PCB layout practices are important for the KSZ8091MLXIA?
Route the Ethernet differential pairs as controlled-impedance traces with tightly matched length and geometry, minimize stubs and vias, and follow the manufacturer reference layout. Place decoupling and PHY support components close to their associated pins, keep switching or high-current paths away from sensitive receive nodes, and use an uninterrupted ground reference beneath the device. Validate the final layer stack and magnetics placement with signal-integrity or compliance testing when required.
Does the KSZ8091MLXIA include Ethernet magnetics?
The KSZ8091MLXIA is the Ethernet physical-layer transceiver and does not replace the external Ethernet isolation or magnetics module. Its listed function is 10BASE-T/100BASE-TX signal transmission and reception over standard CAT-5 twisted pair. The complete network port therefore requires the KSZ8091, compatible magnetics, an RJ45 connector, suitable protection, and a MAC or controller connected through the PHY interface.
What are the key specifications engineers should know about the KSZ8091MLXIA?
The essential KSZ8091MLXIA specifications are one full-duplex 10/100 Ethernet interface, support for 10 Mb/s and 100 Mb/s operation over CAT-5 unshielded twisted pair, a single-supply architecture, a -40°C to +85°C operating range, and a 48-LQFP 7 mm by 7 mm package. These confirmed characteristics position the part for compact embedded Ethernet equipment while detailed electrical limits remain subject to the manufacturer datasheet.
Is KSZ8091MLXIA available for quotation and what is its lead time?
The KSZ8091MLXIA can be requested through the Request a Quote form on this page, and the manufacturer listing reports 2,250 units in a full-tray configuration. The same listing states an estimated factory lead time of 49 weeks, so production planning should include substantial scheduling margin. Confirm current quantity, date code, delivery schedule, and any lot-specific requirements before placing an order.

داده‌های مرجع مهندسی برای KSZ8091MLXIA — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the KSZ8091MLXIA when an embedded product needs a single full-duplex 10/100 Ethernet port, CAT-5 twisted-pair connectivity, a single-supply PHY, and operation across -40°C to +85°C. Its 48-LQFP package is particularly relevant when a project needs many PHY pins in a compact 7 mm by 7 mm footprint. The associated KSZ8041, KSZ8081, and KSZ8001 family parts can offer useful engineering comparisons, but the verified package information does not establish them as pin-compatible substitutes, so they should be treated as redesign choices. For an exact PCB replacement, require the same 48-LQFP land pattern, matching terminal assignments, compatible supply and clocking, equivalent 10/100 support, and acceptable thermal and regulatory performance. Verify the complete Ethernet subsystem, including magnetics, RJ45 connector, reference clock, MAC interface, and system protocol behavior.

مقایسه با جایگزین‌ها

پارامتر این محصول
Package 48-LQFP, 7 mm × 7 mm
Brand Microchip Technology
Device Type 10BASE-T/100BASE-TX physical-layer transceiver
Ethernet Interface 1/1 full-duplex
Supported Data Rates 10 Mb/s and 100 Mb/s
Cable Support CAT-5 unshielded twisted pair
Supply Architecture Single supply
Operating Temperature -40°C to +85°C
Power-Saving Features Supported
Mounting Type Surface mount

تفاوت‌های کلیدی

  • Compact integrated 10/100 Ethernet PHY in a 7 mm by 7 mm LQFP (در مقابلKSZ8041RNL-TR)
  • Extended-temperature operation for industrial embedded products (در مقابلKSZ8041MLL-TR)
  • Single-supply PHY architecture simplifies system integration (در مقابلKSZ8001LA2TR)

یادداشت‌های طراحی

Follow the manufacturer reference layout for the 48-LQFP footprint and Ethernet differential pairs. Keep the PHY, magnetics, and connector placement consistent with the demonstrated application circuit, use a continuous ground reference, and avoid routing the differential lines over discontinuous plane boundaries. High-speed or unrelated switching circuitry should remain away from the receive and reference-clock paths to minimize coupling.

Decouple each applicable supply connection directly at the KSZ8091MLXIA pins and keep the high-frequency return path short. Use the voltage and capacitance values specified in the official application circuit rather than substituting generic bulk capacitors. Confirm startup sequencing, current consumption in normal and power-saving states, and the relationship between the PHY supply and the Ethernet magnetics supply before releasing the power tree.

Do not treat a PHY as a complete Ethernet port. A functioning interface requires pin-compatible magnetics, an appropriate RJ45 connector, a compatible clock source, and a MAC or controller with matching timing and signal levels. Also verify that selected magnetics support both 10BASE-T and 100BASE-TX. Reviewing the complete reference circuit prevents failures caused by isolated component substitutions that appear electrically similar.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The KSZ8091 family description, operating-temperature range, package, and Ethernet functions are confirmed. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation in the current manufacturer product documentation.

جستجوهای مرتبط

KSZ8091MLXIA datasheet KSZ8091MLXIA pinout KSZ8091MLXIA datasheet pdf KSZ8091MLXIA equivalent KSZ8091MLXIA replacement KSZ8091MLXIA price KSZ8091MLXIA stock Microchip KSZ8091MLXIA KSZ8091MLXIA 48-LQFP KSZ8091MLXIA application circuit KSZ8091MLXIA 10BASE-T 100BASE-TX KSZ8091MLXIA footprint

قطعات و اصطلاحات مرتبط

Microchip Technology KSZ8091MLXIA KSZ8091 KSZ8081RNACA KSZ8041RNL-TR KSZ8041MLL-TR Ethernet PHY physical-layer transceiver 10BASE-T 100BASE-TX Fast Ethernet CAT-5 unshielded twisted pair RJ45 connector Ethernet magnetics Media Access Control 48-LQFP LQFP family surface-mount technology single-supply architecture power-saving features differential signal routing controlled impedance embedded networking industrial automation
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ