KSZ8091MLXIA - 10/100 Ethernet PHY | Microchip | 48-LQFP
부품 번호: KSZ8091MLXIA ✓ 활성KSZ8091MLXIA 개요
An Ethernet PHY is the physical-layer component in an Ethernet communications system. It converts digital data from a MAC or network controller into electrical signaling for twisted-pair cabling and converts received signaling back into digital data. The KSZ8091 belongs to the hierarchy of Ethernet interface ICs, physical-layer transceivers, network interface controllers, and semiconductor components. It provides the physical link between a digital Ethernet controller and an RJ45 connector through integrated line-driver and receiver functions.
The KSZ8091MLXIA supports both 10BASE-T and 100BASE-TX operation, allowing a system to connect through legacy 10 Mb/s equipment or Fast Ethernet networks. Its single-supply architecture simplifies power-system design, while its power-saving features support portable and space-constrained equipment. The 48-LQFP package provides ample pins for the PHY, supply connections, clock and control interfaces, and exposed copper connection for robust board assembly.
The device is appropriate for industrial controls, factory automation equipment, embedded routers, network switches, test equipment, and consumer Ethernet products. The -40°C to +85°C operating range supports industrial and commercial environments, although the system designer must still observe the limits for supply voltage, magnetic-component selection, cable length, and thermal performance.
A typical implementation places the KSZ8091MLXIA between an Ethernet MAC or MCU with a media-access-control interface and an Ethernet magnetics module connected to an RJ45 jack. Differential transmit and receive pairs are routed as controlled impedance nets between the PHY and magnetics. Component values, termination networks, magnetic-component selection, and layout follow the manufacturer application guidance to preserve compliant signal integrity.
Designers should compare the complete Ethernet subsystem rather than the PHY alone. Magnetics, connector, reference clock, decoupling network, firmware or MAC behavior, and the selected cable determine end-to-end interoperability. Before production release, validate the assembled board for link establishment, packet transfer, error recovery, temperature behavior, and electromagnetic-emissions requirements.
This page consolidates the KSZ8091MLXIA product identity, confirmed operating characteristics, sourcing structure, package constraints, and application guidance. It also distinguishes documented functions from parameters that require confirmation in the manufacturer datasheet, helping engineers plan an Ethernet interface without assuming unverified electrical details.
드롭인 대체품: KSZ8091MLXIA — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: KSZ8091MLXIA (동일 폼 팩터 및 풋프린트) — 차이점: Package.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청KSZ8091MLXIA 사양
| Device Type | 10BASE-T/100BASE-TX physical-layer transceiver |
| Ethernet Interface | 1/1 full-duplex 10/100 Ethernet |
| Supported Data Rates | 10 Mb/s and 100 Mb/s |
| Cable Standard | CAT-5 unshielded twisted pair |
| Supply Architecture | Single supply |
| 동작 온도 | -40°C to +85°C |
| 패키지 | 48-LQFP, 7 mm × 7 mm |
| 실장 유형 | Surface mount |
| Power-Saving Features | Supported |
KSZ8091MLXIA 48-lqfp, 7 mm × 7 mm 핀 구성 가이드
KSZ8091MLXIA(48-lqfp, 7 mm × 7 mm 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: KSZ8091MLXIA.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
KSZ8091MLXIA 적합 용도: 6 애플리케이션s: Industrial Ethernet Control, Embedded Network Gateway, Test and Measurement Instrument, Factory Automation Module, Network Switch Management Port, Portable Diagnostic Equipment.
Industrial Ethernet Control
The KSZ8091MLXIA fits industrial controllers that need a compact 10/100 Ethernet physical layer for supervisory communication, configuration, and remote monitoring. Its -40°C to +85°C operating range supports extended-temperature factory environments, while 10BASE-T and 100BASE-TX compatibility allows integration with both legacy and Fast Ethernet plant networks. Place the PHY beside its compatible magnetics and RJ45 connector, and route the differential pairs according to the manufacturer reference layout. A MAC-capable microcontroller or controller handles frame processing above the physical layer.
추천
Embedded Network Gateway
The KSZ8091MLXIA provides a compact wired-network endpoint for an embedded gateway, serial-to-Ethernet appliance, or service interface. One full-duplex 10/100 interface is sufficient for management traffic and moderate industrial data exchange, and the 48-LQFP footprint simplifies routing around Ethernet magnetics on space-constrained boards. The single-supply PHY architecture reduces power-tree complexity, although the complete board still needs carefully selected bypass capacitance, a suitable clock source, and compliant external magnetics.
추천
Test and Measurement Instrument
The KSZ8091MLXIA can add a wired 10/100 Ethernet control or data port to test and measurement equipment. Its extended -40°C to +85°C range allows use in controlled industrial test environments, while support for both 10BASE-T and 100BASE-TX improves interoperability with service equipment and legacy hosts. The PHY requires a companion MAC or processor interface, Ethernet magnetics, and an RJ45 connector. Designers should validate packet integrity, link timing, conducted emissions, and isolation performance in the finished enclosure.
추천
Factory Automation Module
The KSZ8091MLXIA is suitable for distributed automation modules that expose configuration, status, and diagnostic data over Ethernet. The 10/100 capability balances link performance with a straightforward embedded interface, and the -40°C to +85°C range supports equipment installed near machinery or process equipment. Keep the PHY and magnetics away from high-current switching nodes, provide a stable reference clock, and observe the differential-routing and return-path guidance in the manufacturer application circuit.
추천
Network Switch Management Port
The KSZ8091MLXIA can implement a dedicated management or out-of-band Ethernet port on a switch, access point, or communications appliance. A full-duplex 10/100 interface is useful for configuration, telemetry, and firmware recovery links where gigabit throughput is unnecessary. Using the 48-LQFP package helps consolidate the Ethernet physical layer on a multilayer board, but designers must account for magnetics spacing, isolation, thermal performance, and channel-length margins to preserve reliable links across all supported temperatures.
추천
Portable Diagnostic Equipment
The KSZ8091MLXIA supports wired Ethernet connectivity in portable diagnostic and service equipment where a low-power, compact network interface is more useful than wireless operation. Its power-saving features and single-supply architecture help simplify battery- or USB-powered designs, while 100BASE-TX offers useful throughput for configuration and log transfer. System-level energy use still depends on the MAC, magnetics, and selected operating modes, so validate current consumption across link states and standby conditions.
추천
추천 제품 요약
엔지니어링 참조 데이터: KSZ8091MLXIA — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Package | 48-LQFP, 7 mm × 7 mm |
| Brand | Microchip Technology |
| Device Type | 10BASE-T/100BASE-TX physical-layer transceiver |
| Ethernet Interface | 1/1 full-duplex |
| Supported Data Rates | 10 Mb/s and 100 Mb/s |
| Cable Support | CAT-5 unshielded twisted pair |
| Supply Architecture | Single supply |
| Operating Temperature | -40°C to +85°C |
| Power-Saving Features | Supported |
| Mounting Type | Surface mount |
주요 차별점
- Compact integrated 10/100 Ethernet PHY in a 7 mm by 7 mm LQFP (vs KSZ8041RNL-TR)
- Extended-temperature operation for industrial embedded products (vs KSZ8041MLL-TR)
- Single-supply PHY architecture simplifies system integration (vs KSZ8001LA2TR)
설계 노트
Follow the manufacturer reference layout for the 48-LQFP footprint and Ethernet differential pairs. Keep the PHY, magnetics, and connector placement consistent with the demonstrated application circuit, use a continuous ground reference, and avoid routing the differential lines over discontinuous plane boundaries. High-speed or unrelated switching circuitry should remain away from the receive and reference-clock paths to minimize coupling.
Decouple each applicable supply connection directly at the KSZ8091MLXIA pins and keep the high-frequency return path short. Use the voltage and capacitance values specified in the official application circuit rather than substituting generic bulk capacitors. Confirm startup sequencing, current consumption in normal and power-saving states, and the relationship between the PHY supply and the Ethernet magnetics supply before releasing the power tree.
Do not treat a PHY as a complete Ethernet port. A functioning interface requires pin-compatible magnetics, an appropriate RJ45 connector, a compatible clock source, and a MAC or controller with matching timing and signal levels. Also verify that selected magnetics support both 10BASE-T and 100BASE-TX. Reviewing the complete reference circuit prevents failures caused by isolated component substitutions that appear electrically similar.
규정 준수 정보
The KSZ8091 family description, operating-temperature range, package, and Ethernet functions are confirmed. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation in the current manufacturer product documentation.