LFE2-12E-5T144I - 12K LUT ECP2 FPGA | Lattice Semiconductor
MPN: LFE2-12E-5T144I ✓ Hoạt độngLFE2-12E-5T144I Tóm tắt
An FPGA is a configurable digital semiconductor whose interconnect and logic resources are programmed after manufacture. Within the product hierarchy, the LFE2-12E-5T144I is an FPGA, a programmable-logic device, and a semiconductor. Its configurable architecture allows parallel interfaces, control logic, signal conditioning, protocol handling, and data-processing functions to be consolidated into one device instead of using multiple fixed-function integrated circuits.
The principal device figures are 12K LUTs, 93 I/O, and a 144-pin TQFP package. The -5 ordering code identifies the performance grade, while the I suffix identifies the industrial temperature option. A 1.2 V core supports low-voltage digital operation, and the device includes DSP resources for designs requiring dedicated multiplication, filtering, waveform generation, or other arithmetic processing.
The ECP2 architecture supports implementation flexibility for control systems, communication interfaces, sensor acquisition, and general-purpose embedded logic. Its 93 I/O provide substantial board-level connectivity in a 144-pin package, reducing the need for external interface logic when pin resources and speed requirements fit the target design. Configuration storage, clocking, JTAG programming, and operating limits should be verified against the Lattice manufacturer documentation for the selected board and system configuration.
Typical uses include industrial automation controllers, RS-485 and RS-232 protocol bridges, multichannel measurement systems, audio and waveform processors, embedded communications equipment, and compact control modules. The FPGA is especially useful when several parallel data paths must be coordinated deterministically or when a product family must adapt to changing interface requirements through programmable logic.
PCB implementation requires strict attention to the 144-pin TQFP footprint, power and ground distribution, decoupling, clock routing, and high-speed signal integrity. Confirm pin assignments, configuration pins, supported clock sources, and interface voltage levels in the manufacturer pinout table before schematic capture. Programming should also include the correct bitstream and suitable JTAG configuration path for the assembled board.
This product summary consolidates the core device identity, ordered speed and temperature options, package details, application guidance, and compatible family alternatives into one engineering-focused reference for FPGA design and component sourcing.
Bộ thay thế dễ dàng lắp đặt cho LFE2-12E-5T144I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với LFE2-12E-5T144I (cùng hình factor và footprint) — khác nhau ở Package, Speed Grade.
LFE2-12E-5TN144I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LFE2-12E-6T144I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LFE2-12SE-5T144I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LFE2-12SE-7TN144C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LFE2-12E-6TN144I
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
LFE2-12E-5T144I Tỷ lệ tối đa & tính chất điện
| Device Type | ECP2 field-programmable gate array (FPGA) |
| Logic Capacity | 12K LUTs |
| Equivalent Logic Cells | 12,000 cells |
| User I/O Count | 93 I/O |
| DSP Resources | 1 DSP block |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -5 |
| Temperature Grade | Industrial |
| Hộp | 144-pin TQFP |
| Package Family | TQFP-144 LQFP surface-mount package |
| Kiểu lắp đặt | Surface mount |
| FPGA Technology | 90 nm |
| Programming Interface | JTAG |
Hướng dẫn cấu hình chân LFE2-12E-5T144I tqfp-144 lqfp surface-mount package
Cấu hình chân cho LFE2-12E-5T144I (tqfp-144 lqfp surface-mount package gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho LFE2-12E-5T144I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
LFE2-12E-5T144I phù hợp cho 6 Áp dụngs: Industrial Automation Controllers, RS-485 and RS-232 Protocol Bridges, Multichannel Measurement and Data Acquisition, Audio and Waveform Processing, Embedded Communications Equipment, Compact Control and Security Modules.
Industrial Automation Controllers
The LFE2-12E-5T144I suits compact industrial controllers that combine parallel machine I/O with deterministic timing and industrial-temperature requirements. Its 12K LUTs can host state machines, interlocks, counters, communication framing, and motion-control logic, while 93 I/O reduce the need for external glue logic. The 1.2 V core supports modern low-voltage FPGA architectures without requiring a separate processor for every control function. Use the manufacturer pinout to map field-bus and sensor signals to compatible I/O banks, and validate timing against the -5 speed grade before closing the system clocking plan.
Được đề xuất
RS-485 and RS-232 Protocol Bridges
The LFE2-12E-5T144I can implement protocol conversion, command parsing, checksum generation, and buffering between serial interfaces. Its 12K LUTs and one DSP block provide more logic capacity than a basic programmable logic device, allowing multiple channels and a supervisory state machine to share one FPGA. The 144-pin TQFP package offers 93 I/O for parallel host connections, status signals, and external memory. Validate voltage levels on each serial channel and keep transceiver direction control deterministic to prevent bus contention.
Được đề xuất
Multichannel Measurement and Data Acquisition
The LFE2-12E-5T144I is appropriate for sensor-acquisition systems that require parallel ADC control, digital filtering, calibration tables, and data packing. Its 12K LUTs can coordinate multiple converters, while the DSP block can accelerate multiply-accumulate operations used in filtering and scaling. The 93 I/O provide ample connections for converter clocks, data buses, control lines, status indicators, and external nonvolatile memory. Establish analog and digital partitioning carefully so switching converters and high-speed ADC clocks do not disturb sensitive measurement circuitry.
Được đề xuất
Audio and Waveform Processing
The LFE2-12E-5T144I can perform digital filtering, sample-rate conversion assistance, waveform generation, and interface bridging in audio equipment. Its DSP block is useful for multiply-accumulate filtering, while the remaining LUT capacity supports control, clock division, and buffer management. The 144-pin TQFP package gives a compact implementation with 93 I/O for codec signals and control lines. Clock the FPGA from a low-jitter source when signal quality depends on a stable sampling reference, and keep the codec interface within the voltage and timing limits of the selected bank.
Được đề xuất
Embedded Communications Equipment
The LFE2-12E-5T144I is useful in network-interface, protocol-conversion, and embedded communications modules where parallel data must be transformed into serial traffic. The FPGA can maintain packet framing, flow control, error checking, and timing relationships while external transceivers handle the physical layer. Its 12K LUTs allow control logic to coexist with the data path, and 93 I/O support external memory and parallel host buses. Confirm all interface voltage standards, implement clock-domain crossings conservatively, and validate signal integrity on high-speed links before environmental testing.
Được đề xuất
Compact Control and Security Modules
The LFE2-12E-5T144I can implement authentication routines, key-locking logic, command filters, or access-control functions in a compact programmable module. The one DSP block supports finite-state-machine processing and selected arithmetic operations, while 12K LUTs provide room for peripheral bridges and status logic. The 144-pin TQFP package supports compact board construction without sacrificing I/O availability. For security-critical equipment, add external tamper controls and protected key storage, and verify the FPGA configuration path against the system threat model.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho LFE2-12E-5T144I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | LFE2-12E-5TN144I | LFE2-12E-6T144I | LFE2-12SE-5T144I | LFE2-12SE-7TN144C | LFE2-12E-6TN144I |
|---|---|---|---|---|---|---|
| Package | 144-pin TQFP | 144-pin TQFP | 144-pin TQFP | 144-pin TQFP | 144-pin TQFP | 144-pin TQFP |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Device Family | ECP2 | ECP2 | ECP2 | ECP2 | ECP2 | ECP2 |
| Core Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Speed Grade | -5 | -5 | -6 | -5 | -7 | -6 |
| FPGA Technology | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm |
Bảo phân biệt quan trọng
- Industrial-temperature ordering option (vsLFE2-12SE-7TN144C)
- Higher speed option available in the same footprint (vsLFE2-12E-5T144I)
- Standard 12E configuration with one DSP block (vsLFE2-12SE-5T144I)
Ghi chú thiết kế
Use the manufacturer 144-pin TQFP land pattern and verify pin-1 orientation against the PCB CAD library. TQFP leads are closely spaced, so enforce the fabricator's minimum width and clearance rules. Keep sensitive clock and configuration traces away from high-current switching paths, and provide continuous ground planes wherever the package footprint allows.
Separate the 1.2 V core supply from I/O supplies and place local high-frequency decoupling close to the corresponding power and ground pins. Check the manufacturer power-sequencing table before combining external transceivers and memory. Account for simultaneous I/O switching current because a design that is stable at static power may fail only during high-activity data transfers.
Route clocks as short and continuous as possible, provide a defined return path beneath each high-speed trace, and avoid stubs or unnecessary test pads. Use the -5 timing grade margins from the manufacturer timing tables for external memory and transceiver interfaces. If timing closure is difficult, evaluate LFE2-12E-6T144I with the same 144-pin footprint rather than changing the board layout.
Do not select a family member solely from the LUT count and package. Confirm the E versus SE configuration, speed grade, temperature suffix, packing suffix, supported I/O standards, and configuration requirements. The 144-pin package variants LFE2-12E-5Q208C and LFE2-12E-5F484I are not footprint-compatible because they use 208-pin and 484-pin packages.
Thông tin tuân thủ
The industrial-temperature ordering option is identified by the I suffix, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration is stated in the product information. Confirm environmental and automotive requirements with the manufacturer before qualification.
