Texas Instruments

LM393LVDR - Dual 1.65-5.5V Open-Drain Comparator | TI

MPN: LM393LVDR ✓ Hoạt động
1.65 V to 5.5 V Vdss 0.1 mA Id 8-pin SOIC (D) Package
MOQ: 1 |

LM393LVDR Tóm tắt

Texas Instruments LM393LVDR is a dual, general-purpose voltage comparator operating from 1.65 V to 5.5 V, with an open-drain output configuration and an 8-pin SOIC package. The device contains two independent comparison channels, supports rail-to-rail input operation, and is intended for low-voltage threshold, sensing, and signal-conditioning circuits.

A comparator is a signal-conditioning semiconductor that compares two input voltages and produces a logic-level output indicating which input is higher. In the broader device hierarchy, a comparator belongs to analog and mixed-signal integrated circuits, where it supports the LDO, voltage regulator, power management IC, and embedded-control ecosystems. An open-drain comparator requires an external pull-up resistor because its output can actively pull the output node low while otherwise leaving it high-impedance.

The LM393LV family operates from 1.65 V to 5.5 V and provides two independent channels in one package. Its open-drain outputs can be pulled up to a suitable logic voltage, allowing multiple devices to share a wired bus when their output stages are not active simultaneously. The manufacturer specifies a maximum input offset voltage of 3000 uV, a maximum supply current of 0.1 mA, and a response time of 600 ns. Its operating temperature range is -40°C to +125°C.

The two comparison channels operate independently, so each channel can use separate inverting and non-inverting inputs while sharing the supply pins. Rail-to-rail input behavior makes the device useful near the lower and upper limits of its 1.65 V to 5.5 V supply range. The 600 ns response time supports general-purpose digital interfacing, while the open-drain architecture adds design flexibility through user-selected pull-up resistors and logic levels.

Typical uses include low-voltage sensor threshold detection, battery-voltage monitoring, overvoltage and undervoltage indication, signal conditioning, and digital control systems. Two comparator channels can monitor independent thresholds in one compact package, reducing board area when the application does not require rail-to-rail push-pull outputs or a specific fixed output reference.

Design the external pull-up resistor for the required sink current, output rise time, and total bus capacitance. Confirm that the pull-up voltage remains within the connected logic system’s allowed range, and account for the open-drain high-state rise time rather than assuming a CMOS push-pull output edge. Keep sensitive comparison inputs away from switching nodes and high-current return paths.

This page combines manufacturer specifications, package and pin information, drop-in replacement guidance, and practical design considerations. It also organizes the LM393LVDR for engineers evaluating low-voltage comparator selection, PCB layout, signal threshold design, and supply compatibility.

Bộ thay thế dễ dàng lắp đặt cho LM393LVDR — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với LM393LVDR (cùng hình factor và footprint) — khác nhau ở Package, Comparator Type, Operating Temperature Range, Response Time, Output Type.

Texas Instruments
Package: 8-SOIC, 0.154 in x 3.90 mm width
Comparator Type: General Purpose
Output Type: Open-Collector
So sánh với LM393LVDR →
Texas Instruments
Package: 8-SOIC (D), 3.90 mm width
Comparator Type: General-purpose dual differential comparator
Operating Temperature Range: 0 C to 70 C
So sánh với LM393LVDR →
STMicroelectronics
Package: 8-pin SOIC
Comparator Type: General-purpose voltage comparator
Output Type: Open-collector
So sánh với LM393LVDR →
Texas Instruments
Package: SOIC-8 (D), 3.90 mm body width
Operating Temperature Range: 0 °C to +70 °C
Response Time: 1.3 µs (typical)
So sánh với LM393LVDR →
onsemi
Package: 8-pin SOIC (SOIC-8, D package)
Comparator Type: Low offset voltage precision voltage comparator
Response Time: 1300 ns
So sánh với LM393LVDR →
Texas Instruments
Package: 8-SOIC, 4.5 mm width
Comparator Type: Dual, general-purpose voltage comparator
Operating Temperature Range: -40 °C to 125 °C
So sánh với LM393LVDR →

LM393DR

✅ Drop-In
Texas Instruments
📦 8-pin SOIC (D)
Texas Instruments · LM393DR · Dual Differential Comparator · 2 · Open-Collector · 2 V to 36 V · ±1 V to ±18 V · 1 mV

✓ Còn hàng

$0.11 / Đơn vị

Xem tài liệu →

LMV393DR

✅ Drop-In
📦 8-pin SOIC (D)
Open-drain SOIC-8 pinout with a 2.7 V to 16 V range and approximately 50 uA supply current; minimum voltage is 63% above 1.65 V and current is 50% below 0.1 mA.

📋 Tham chiếu thay thế (không có trong danh mục)

LM393LVDR Tỷ lệ tối đa & tính chất điện

Comparator Type Dual general-purpose voltage comparator
Number of Channels 2 channels
Supply Voltage Range 1.65 V to 5.5 V
Input Common-Mode Range Rail-to-rail
Kiểu đầu ra Open drain
Maximum Input Offset Voltage 3000 uV
Maximum Supply Current 0.1 mA
Response Time 600 ns
Khoảng nhiệt độ hoạt động -40°C to +125°C
Hộp 8-pin SOIC (D)
Số chân 8 pins
Kiểu lắp đặt Surface mount
Input Pin Count 4 inputs across 2 channels
Output Pin Count 2 open-drain outputs
Output Pull-Up Requirement External pull-up resistor required

Cấu hình chân LM393LVDR

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Chân 1 OUT1 — Open-drain output for comparator channel 1
Chân 2 IN1- — Inverting input for comparator channel 1
Chân 3 IN1+ — Non-inverting input for comparator channel 1
Chân 4 GND — Ground connection
Chân 5 IN2+ — Non-inverting input for comparator channel 2
Chân 6 IN2- — Inverting input for comparator channel 2
Chân 7 OUT2 — Open-drain output for comparator channel 2
Chân 8 VCC — Positive supply connection

Ứng dụng tiêu biểu

LM393LVDR phù hợp cho 6 Áp dụngs: Low-Voltage Sensor Threshold Detection, Battery Voltage Monitoring, Power Rail Overvoltage Detection, Digital Logic Level Interface, LED Status and Threshold Indication, IoT Sensor and Limit Detection.

🧩

Low-Voltage Sensor Threshold Detection

The LM393LVDR fits sensor interfaces whose signal must be compared against a low-voltage reference. Its 1.65 V to 5.5 V supply range supports 1.8 V, 2.5 V, 3.3 V, and 5 V systems, while the two independent channels can monitor two sensor thresholds. Connect each non-inverting input to a reference and each inverting input to the sensed signal, then reverse the inputs when a different output polarity is required. The 3000 uV maximum offset specification is important when the sensing gap is small. Because the output is open drain, add a pull-up resistor to the interface logic voltage and include its capacitance when validating output rise time.

⚡

Battery Voltage Monitoring

The LM393LVDR is appropriate for low-voltage battery systems where a rail must be flagged before it falls outside the usable operating range. A resistor divider can scale the battery voltage to the comparator input, while the second channel can monitor a second rail or an overvoltage condition. Operation down to 1.65 V supports low-energy sensing platforms, and the 0.1 mA maximum supply current helps preserve battery capacity. Keep the divider resistance high enough to limit divider current and low enough to avoid excessive leakage effects. Use a pull-up to the monitored system’s logic rail, and account for input offset when choosing a threshold with narrow safety margins.

🏭

Power Rail Overvoltage Detection

The LM393LVDR can implement a compact overvoltage detector for a regulated 1.8 V, 2.5 V, 3.3 V, or 5 V rail. A precision divider reduces the rail voltage to the comparison input, while the comparator identifies whether the rail has crossed the selected limit. The open-drain output permits a wired fault signal with a pull-up resistor, allowing the output polarity to remain independent of the internal output driver. With two channels, the design can monitor overvoltage and undervoltage conditions without using two packages. Validate the divider tolerance, the comparator’s 3000 uV maximum offset, and the 600 ns response time before setting protection thresholds that require rapid fault signaling.

🔧

Digital Logic Level Interface

The LM393LVDR can interface a low-voltage analog signal to a digital control system because its open-drain output can be pulled up to the receiving logic voltage. This is useful when the comparator must detect a threshold without forcing a dedicated push-pull output stage. The 1.65 V to 5.5 V operating range supports both low-voltage sensors and common 3.3 V or 5 V logic domains. Select the pull-up value from the required sink current, bus capacitance, and acceptable rise time rather than using an arbitrary resistor. When multiple open-drain outputs share a node, ensure that no two devices pull the bus low simultaneously, since wired-AND behavior is intentional but may not suit every system architecture.

💡

LED Status and Threshold Indication

The LM393LVDR can drive an LED or digital status indicator after comparing a measured voltage against a reference. The open-drain stage can sink LED current when the threshold is exceeded, while a series resistor limits current to the intended operating range. Its low-voltage operation supports compact battery-powered indicators, and the 600 ns response time provides prompt visual state changes. The external pull-up establishes the digital high level separately from the LED load. Confirm that the pull-up and LED paths do not create an unintended current path when the output releases the bus, and use transistor buffering if the indicator requires more current than the comparator output can safely sink.

🌐

IoT Sensor and Limit Detection

The LM393LVDR is useful in IoT sensor nodes that must locally detect a limit without waking a microcontroller for every threshold event. Its 1.65 V minimum supply supports low-energy rails, while two channels can handle independent limit conditions. The open-drain output can be connected to a microcontroller interrupt, power-gate signal, or shared pull-up node, reducing the number of I/O pins required. The 0.1 mA maximum supply current and 3000 uV maximum offset are particularly useful in low-power sensing designs, provided the signal margin exceeds the offset error. Use rail-to-rail inputs within the specified operating limits and keep comparator traces away from wireless-module switching and fast digital return paths to reduce false threshold events.

What is the operating voltage range of LM393LVDR?
The LM393LVDR operates from 1.65 V to 5.5 V. According to the Texas Instruments LM393LV product page, this low-voltage range makes the device suitable for 1.8 V, 2.5 V, 3.3 V, and 5 V systems. The manufacturer lists the LM393LVDR as an 8-pin SOIC device rated from -40°C to +125°C. Its two comparison channels operate independently from the common supply.
What type of output does LM393LVDR have?
The LM393LVDR has two open-drain comparator outputs. According to the Texas Instruments LM393LVDR product listing, each output can pull a logic node toward ground but requires an external pull-up resistor to establish a high level. This architecture permits a pull-up voltage selected for the surrounding digital circuit and supports wired open-drain signaling when only one output is actively pulling low at a time.
Where can I download the LM393LVDR datasheet PDF?
The LM393LVDR datasheet is available through the Texas Instruments LM393LV product page and the linked manufacturer documentation. The document is titled “LM393LV Dual and LM339LV Quad Low Voltage, Rail-to-Rail Comparators” and covers the LM393LV family. Use the manufacturer datasheet for the complete pin description, absolute-maximum ratings, electrical characteristics, and application guidance before finalizing a PCB design.
Where can I find the LM393LVDR pinout?
The LM393LVDR uses an 8-pin SOIC arrangement with two independent comparator channels. According to the manufacturer datasheet, pins 1 and 7 are the open-drain outputs, pins 2 and 6 are inverting inputs, pins 3 and 5 are non-inverting inputs, pin 4 is ground, and pin 8 is the supply connection. Use the package drawing when assigning PCB tracks and placing the external pull-up resistors.
Is LM393LVDR suitable for 3.3V systems?
Yes, the LM393LVDR is suitable for a 3.3 V supply because its 1.65 V to 5.5 V operating range includes 3.3 V. The device also supports rail-to-rail inputs, allowing both comparison inputs to operate near the supply rails within the specified operating conditions. Choose a pull-up resistor that connects to a valid 3.3 V logic level when the output must interface directly with 3.3 V digital circuitry.
What are the key specifications of LM393LVDR that engineers should know?
The LM393LVDR is a dual, 1.65 V to 5.5 V, open-drain comparator in an 8-pin SOIC package. Its manufacturer documentation specifies rail-to-rail inputs, a maximum offset voltage of 3000 uV, a maximum supply current of 0.1 mA, a 600 ns response time, and an operating temperature range of -40°C to +125°C. These characteristics place it in the general-purpose, low-voltage comparator category.
What can replace the LM393LVDR on the same PCB?
The LM393DR is a same-manufacturer, pin-compatible SOIC-8 option, but its wider operating-voltage design is not an exact low-voltage functional match. The LMV393 family is a cross-brand open-drain alternative for 3.3 V and 5 V systems. A true drop-in decision still requires checking input common-mode range, offset, response time, output polarity, pull-up requirements, and the complete 8-pin connection pattern.
Is LM393LVDR the same as LM393DR?
No. The LM393LVDR is the low-voltage member of the Texas Instruments LM393LV family, specified from 1.65 V to 5.5 V, while the LM393DR belongs to the broader LM393 family with a wider supply range. Both use an 8-pin SOIC arrangement with open-drain outputs, but the LM393LVDR is the better fit when low-voltage operation, input offset, speed, or power characteristics are the primary requirements.
LM393LVDR vs LM393DR: which is better for a 3.3V circuit?
The LM393LVDR is generally the better match for a dedicated 3.3 V circuit because its specified 1.65 V to 5.5 V range is optimized for low-voltage operation. The LM393DR is a broader-range comparator that can also function in traditional higher-voltage systems. According to the Texas Instruments comparison information, LM393LV offers lower power, lower offset voltage, and faster speed for low-voltage designs.
When should I choose LM393LVDR instead of LMV393?
Choose LM393LVDR when the circuit must operate as low as 1.65 V or requires the specified 3000 uV maximum offset and 600 ns response time. The LMV393 is a lower-power CMOS-oriented alternative, but the cited family information gives a 2.7 V minimum operating voltage. LM393LVDR therefore fits lower-voltage rails and applications where its open-drain interface and temperature range are more important than minimizing supply current.
What is the best Texas Instruments equivalent to LM393LVDR?
The LM393DR is the closest same-brand general-purpose alternative identified for a SOIC-8 replacement because it retains the dual open-drain comparator architecture and pin arrangement. It is not an exact low-voltage match because its supply-voltage coverage differs from the LM393LVDR’s 1.65 V to 5.5 V range. Confirm every operating parameter in the manufacturer datasheet before treating it as a drop-in replacement.
What is the best cross-brand equivalent for LM393LVDR?
The LMV393 is a cross-brand candidate for a 3.3 V or 5 V open-drain comparator design. According to the replacement information, it is pin-compatible and operates from 2.7 V to 16 V with approximately 50 uA total supply current. It cannot cover the LM393LVDR’s full 1.65 V to 5.5 V operating range, so it is suitable only when the lower limit, offset, response time, and fault-tolerance requirements remain acceptable.
Where can I buy LM393LVDR online?
Use the Request a Quote form on this page to request current LM393LVDR availability, quantity pricing, and lead time. The Texas Instruments ordering page identifies the LM393LVDR as the tape-and-reel 8-pin SOIC ordering option for the LM393LV family. The request form is the appropriate route for a current quotation rather than relying on a potentially stale historical price.
What is the current lead time for LM393LVDR?
Request the current LM393LVDR lead time through the Request a Quote form on this page. Lead time can vary with order quantity, package format, manufacturing schedules, and market conditions, so it should be confirmed for the exact MPN. The part is listed as an 8-pin SOIC ordering option within Texas Instruments’ active LM393LV product family.
Is LM393LVDR in stock?
Current LM393LVDR inventory should be confirmed through the Request a Quote form on this page. The Texas Instruments product page provides the exact ordering configuration, while channel inventory changes continuously by quantity and region. If a scheduled production or design-in quantity is required, include that quantity and target date in the quote request.

Dữ liệu tham khảo kỹ thuật cho LM393LVDR — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the LM393LVDR for a 1.8 V, 2.5 V, 3.3 V, or 5 V system that needs two general-purpose comparison channels with open-drain outputs, rail-to-rail inputs, a 3000 uV maximum offset, and a 600 ns response time. Its -40°C to +125°C rating also suits industrial-temperature designs. Select the LM393DR when a legacy circuit spans a wider 2 V to 36 V supply range and the LM393LV-specific low-voltage characteristics are unnecessary. Consider the LMV393DR when the circuit operates no lower than 2.7 V and lower supply current is more important than the LM393LVDR’s 1.65 V minimum. For either alternative, verify the complete pinout, input common-mode range, offset, response time, output behavior, and pull-up voltage before approving a drop-in substitution.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này LM393DR LMV393DR
Package 8-pin SOIC (D) 8-pin SOIC (D) 8-pin SOIC (D)
Brand Texas Instruments Texas Instruments STMicroelectronics
Comparator Channels 2 2 2
Supply Voltage Range 1.65 V to 5.5 V 2 V to 36 V 2.7 V to 16 V
Output Type Open drain Open collector/open drain Open drain

Bảo phân biệt quan trọng

  • Lower minimum operating voltage (vsLMV393DR)
  • Low-voltage performance specialization (vsLM393DR)
  • Two independent channels in one package (vsLMV393DR)

Ghi chú thiết kế

Do not treat the open-drain output as a push-pull CMOS output. Each output requires a pull-up resistor to establish a valid high level. Select that resistor using the receiving logic voltage, required sink current, total bus capacitance, and acceptable rise time. If multiple outputs share one node, ensure the system can tolerate wired-AND behavior and that only one output attempts to pull the node low at a time.

Keep the supply within the specified 1.65 V to 5.5 V range and use the manufacturer’s absolute-maximum ratings as hard limits. Although the comparator consumes no more than 0.1 mA under the stated conditions, output sink current and pull-up resistor current contribute to the total system load. A low pull-up resistance reduces rise time but increases continuous current when an output is low, so calculate both states before finalizing the value.

Route the two high-impedance comparison inputs away from switching nodes, inductor fields, and fast digital return currents. A small input-signal margin may be affected by the 3000 uV maximum input offset and by noise coupled onto the reference or sensor trace. If the threshold is precise, use a low-noise reference, short input traces, and a stable ground reference. Avoid adding long parallel runs beneath the inputs unless the PCB stack-up provides adequate isolation.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The manufacturer product information confirms the electrical and package specifications, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not identified.

Tìm kiếm liên quan

LM393LVDR datasheet LM393LVDR pinout LM393LVDR datasheet pdf LM393LVDR equivalent LM393LVDR replacement LM393LVDR drop-in replacement LM393LVDR cross reference LM393LVDR vs LM393DR LM393LVDR 8-SOIC pinout LM393LVDR open drain comparator LM393LVDR 1.65V 5.5V LM393LVDR price Texas Instruments LM393LVDR LM393LVDR battery monitoring LM393LVDR sensor threshold

Các bộ phận và thuật ngữ liên quan

Texas Instruments LM393LVDR LM393LV LM393DR LMV393DR STMicroelectronics dual comparator voltage comparator analog comparator mixed-signal integrated circuit power management IC open-drain output rail-to-rail input 1.65 V to 5.5 V supply input offset voltage response time 8-pin SOIC SOIC family surface-mount package SMD sensor threshold detection battery voltage monitoring power rail supervision wired-AND logic external pull-up resistor
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ