Analog Devices

MAX3232EUE+T - Dual RS-232 Transceiver | Analog Devices

MPN: MAX3232EUE+T ✓ Hoạt động
3.0 V to 5.5 V Vdss 300 µA Id 16-pin TSSOP Package
MOQ: 1 |

MAX3232EUE+T Tóm tắt

The Analog Devices MAX3232EUE+T is a dual RS-232 transceiver with two drivers, two receivers, and a dual charge-pump circuit, operating from 3.0 V to 5.5 V at data rates up to 1 Mbps in a 16-pin TSSOP package. It is designed for bidirectional asynchronous serial communication between modern digital systems and legacy RS-232 equipment.

An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232-compliant voltage levels and restores RS-232 inputs to compatible logic levels. The MAX3232 belongs to the interface IC hierarchy, combining line drivers, line receivers, charge pumps, and protection functions in one device. Its charge-pump architecture supports true RS-232 operation from a single 3.0 V to 5.5 V supply without a separate negative supply rail.

The device requires only four external 0.1 µF charge-pump capacitors. Its integrated dual charge pump generates the positive and negative voltages needed by the drivers, while the receiver side converts incoming serial data into CMOS-compatible signals. The MAX3232E family provides low power consumption, including approximately 300 µA typical quiescent current reported for the MAX3232EUE+T, making it suitable for equipment where both interface performance and operating efficiency matter.

With two transmit and two receive channels, the transceiver can support two RS-232 ports or provide hardware flow-control signals alongside one primary data channel. Operation from 3.0 V to 5.5 V allows use with 3.3 V and 5 V logic systems. Its 16-pin TSSOP package supports compact surface-mount assemblies, while the stated data-rate capability of up to 1 Mbps suits higher-speed serial links, instrumentation, and industrial control equipment.

Typical applications include industrial serial consoles, point-of-sale terminals, test and measurement equipment, barcode scanners, and embedded systems communicating with legacy RS-232 peripherals. The device is especially useful when the logic supply is 3.3 V but the attached peripheral still requires true bipolar RS-232 signaling.

For a reliable layout, place all four 0.1 µF charge-pump capacitors close to their associated pins and route the RS-232 connector interface away from sensitive analog and high-speed digital traces. Confirm signal polarity, flow-control direction, and connector pin assignments during schematic review because the transmit and receive pins are dedicated rather than automatically interchangeable.

This page combines the manufacturer's electrical and package information with same-family drop-in alternatives, application guidance, interface-design notes, and a parameter comparison. It is intended to help engineers identify the correct MPN, validate PCB compatibility, and implement a reliable RS-232 interface.

Bộ thay thế dễ dàng lắp đặt cho MAX3232EUE+T — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX3232EUE+T (cùng hình factor và footprint) — khác nhau ở Product Type, Package, Charge-Pump Architecture, Charge-Pump Capacitors, ESD Protection.

Analog Devices
Product Type: 2/2 transceiver, full RS-232
Package: 16-pin TSSOP
Charge-Pump Capacitors: 4 × 0.1 µF
So sánh với MAX3232EUE+T →
Analog Devices
Product Type: 2/2 full-duplex RS-232 transceiver
Package: 16-pin TSSOP
ESD Protection: ±15 kV
So sánh với MAX3232EUE+T →
Analog Devices
Product Type: True RS-232 transceiver
Package: 16-SOIC
Charge-Pump Architecture: Dual on-chip charge pump
So sánh với MAX3232EUE+T →

MAX3232ECUE+

✅ Drop-In
Analog Devices
📦 16-pin TSSOP
2/2 full-duplex RS-232 transceiver · 2 · 2 · 3.0 V to 5.5 V · 1 Mbps · Down to 10 nA · ±15 kV · True RS-232

Liên hệ để biết giá

Xem tài liệu →

MAX3232CUE+T

✅ Drop-In
Analog Devices
📦 16-pin TSSOP
2/2 transceiver, full RS-232 · 3.0 V to 5.5 V · 1 Mbps · 2 · 2 · 4 × 0.1 µF · 16-pin TSSOP · Surface mount

Liên hệ để biết giá

Xem tài liệu →

MAX3232EUE+T Thông số kỹ thuật

Device Type 2/2 RS-232 transceiver
Number of Drivers 2
Number of Receivers 2
Supply Voltage Range 3.0 V to 5.5 V
Maximum Data Rate 1 Mbps
Typical Quiescent Current 300 µA
Charge-Pump Capacitor Value 0.1 µF each
Required Charge-Pump Capacitors 4
Driver Transition Time 300 ns
Package Type 16-pin TSSOP
Kiểu lắp đặt Surface mount
Logic Compatibility CMOS-compatible
Charge-Pump Architecture Dual

Hướng dẫn cấu hình chân MAX3232EUE+T 16-pin tssop

Cấu hình chân cho MAX3232EUE+T (16-pin tssop gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 16-pin tssop cho MAX3232EUE+T

Không có dữ liệu chân cụ thể sẵn có cho MAX3232EUE+T.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

MAX3232EUE+T phù hợp cho 6 Áp dụngs: 3.3 V Industrial Serial Console, Point-of-Sale Terminal Interface, Barcode Scanner Connectivity, Test and Measurement Equipment, Embedded Service and Configuration Port, Network Equipment Maintenance Port.

🏭

3.3 V Industrial Serial Console

The MAX3232EUE+T is suitable for a 3.3 V controller that must communicate with legacy equipment through a true RS-232 port. Its 3.0 V to 5.5 V operating range permits operation from a 3.3 V rail, while the dual charge-pump circuit generates the bipolar voltage levels required at the connector. The two-driver and two-receiver arrangement can support a data path plus hardware flow control. With a stated capability of up to 1 Mbps, the interface offers more performance headroom than required by many legacy consoles, although the peripheral's actual baud rate remains the limiting factor.

🖥️

Point-of-Sale Terminal Interface

A point-of-sale terminal often combines a low-voltage embedded processor with a printer, scanner, or customer-facing peripheral that retains an RS-232 connector. The MAX3232EUE+T bridges that boundary by converting CMOS logic into true RS-232 levels and receiving commands from the peripheral. Its 16-pin TSSOP package supports compact controller-board placement, while four 0.1 µF external capacitors keep the charge-pump support network manageable. The 3.3 V to 5.5 V supply range also allows the same interface design to be adapted to different embedded-computer configurations.

🧩

Barcode Scanner Connectivity

The MAX3232EUE+T can connect an embedded host to a barcode scanner that uses an RS-232 interface. The two receivers allow command responses and hardware status to return to the host, while the two drivers provide the outbound command and flow-control paths. Operating from 3.0 V to 5.5 V supports compact scanners and industrial terminals with either 3.3 V or 5 V supply rails. Design the layout to keep the cable-side driver traces away from sensitive logic and provide the four charge-pump capacitors with short, symmetrical connections.

📡

Test and Measurement Equipment

The MAX3232EUE+T is appropriate for test and measurement equipment that retains a service or control port using true RS-232 signaling. Its up-to-1-Mbps capability supports faster instrument-control traffic, and the integrated charge pump removes the need for a separate negative supply. The two transmit and two receive channels can be allocated according to the instrument protocol, including separate data and handshake lines. Because RS-232 is a single-ended interface susceptible to ground offsets and cable noise, the connector return path and chassis grounding should be designed carefully rather than treated as an ordinary logic signal.

🔧

Embedded Service and Configuration Port

The MAX3232EUE+T can provide a configuration and service port on an embedded controller board that must communicate with a laptop or service terminal using RS-232. Its low 3.0 V minimum supply allows operation from modern embedded rails, while the true RS-232 charge-pump output remains compatible with conventional PC serial-port equipment. Two channels support either two asynchronous links or one data link with hardware flow control. A robust implementation should include software handshaking, inversion checks, connector keying, and a defined grounding strategy for systems connected through long or unbalanced RS-232 cables.

🌐

Network Equipment Maintenance Port

The MAX3232EUE+T can implement a maintenance or out-of-band management connection in networking equipment where the main system architecture no longer includes a physical RS-232 connector. A low-power management controller can use the transceiver to communicate with a laptop during installation or troubleshooting. The 16-pin TSSOP package conserves board area, and the 3.0 V to 5.5 V range permits integration with mixed-voltage logic. Place the protection network near the connector and route the interface away from high-energy switching nodes to reduce the chance that transient or common-mode disturbances interfere with service access.

Tóm tắt các sản phẩm được đề xuất

MAX3232EIDR Texas Instruments Được sử dụng trong: 3.3 V Industrial Serial Console, Point-of-Sale Terminal Interface, Barcode Scanner Connectivity, Test and Measurement Equipment, Embedded Service and Configuration Port, Network Equipment Maintenance Port MAX232EIDR Texas Instruments Được sử dụng trong: 3.3 V Industrial Serial Console, Embedded Service and Configuration Port Z86C4410PSC Serial communications controller Được sử dụng trong: Point-of-Sale Terminal Interface Z86E0412PEC Zilog Được sử dụng trong: Barcode Scanner Connectivity Z86C9612PSC Serial communication controller Được sử dụng trong: Test and Measurement Equipment Z86C9328PSC Serial communications controller Được sử dụng trong: Network Equipment Maintenance Port
What is the MAX3232EUE+T?
The MAX3232EUE+T is a dual true RS-232 transceiver containing two line drivers, two line receivers, and a dual charge-pump circuit. According to the Analog Devices MAX3232 data sheet, it operates from 3.0 V to 5.5 V, supports data rates up to 1 Mbps, and uses four external 0.1 µF charge-pump capacitors. The device is packaged in a 16-pin TSSOP for compact surface-mount serial-interface designs.
What is the operating voltage of MAX3232EUE+T?
The MAX3232EUE+T operates from 3.0 V to 5.5 V. This range allows the transceiver to work with both 3.3 V and 5 V system supply rails while generating the positive and negative voltages required by true RS-232 drivers. According to the Analog Devices MAX3232 data sheet, its low-dropout transmitter architecture supports operation close to the lower supply limit.
Where can I download the MAX3232EUE+T datasheet PDF?
The official MAX3232EUE+T datasheet is available through the Analog Devices MAX3232 product page at https://www.analog.com/en/products/max3232.html. The manufacturer page links the MAX3232 data sheet and associated technical documentation. Use that document for the authoritative pin descriptions, charge-pump capacitor connections, electrical characteristics, and recommended operating conditions.
Where can I find the MAX3232EUE+T pinout?
The MAX3232EUE+T pinout is defined in the pin-description and package diagrams in the Analog Devices MAX3232 data sheet. The device has 16 TSSOP pins, including the supply, ground, charge-pump capacitor, driver-output, and receiver-input connections. Because several pins support reusable driver or receiver functions, use the manufacturer pin table to preserve the intended channel assignments and avoid incorrect signal routing.
What is the maximum data rate of MAX3232EUE+T?
The MAX3232EUE+T supports RS-232 data rates up to 1 Mbps. According to the Analog Devices MAX3232 product documentation, this performance makes the device suitable for higher-speed legacy serial links rather than only the low-speed applications commonly served by older RS-232 transceivers. Actual usable throughput also depends on the connected equipment, cable characteristics, signal integrity, and host-driver configuration.
How many external capacitors does MAX3232EUE+T require?
The MAX3232EUE+T requires four external 0.1 µF charge-pump capacitors. These capacitors work with the integrated dual charge pump to generate the positive and negative rail voltages used by the RS-232 transmitters. According to the Analog Devices MAX3232 data sheet, placing these capacitors close to the relevant device pins helps maintain stable charge-pump operation and reliable data transmission.
Can MAX3232EUE+T interface 3.3 V logic to a 5 V RS-232 port?
Yes, the MAX3232EUE+T can connect 3.3 V-compatible logic to a true RS-232 port because its supply voltage range is 3.0 V to 5.5 V. The charge-pump circuitry develops the bipolar signal levels required by RS-232 regardless of the logic-side supply within that range. Verify the external host UART, logic thresholds, flow-control pins, and connector wiring before deployment.
Is MAX3232EUE+T suitable for industrial equipment?
The MAX3232EUE+T can be used in industrial serial-interface equipment when its specified electrical limits and environmental requirements meet the application. Its 3.0 V to 5.5 V operating range, true RS-232 signaling, and up-to-1-Mbps capability suit controller modules, serial consoles, and service interfaces. The operating-temperature and ESD requirements should be checked against the manufacturer's data sheet for the specific installation environment.
What is the difference between MAX3232EUE+T and MAX3232ECUE+?
Both devices are MAX3232-family dual transceivers associated with the same 16-pin TSSOP footprint, but their exact electrical ratings must be compared before substitution. The MAX3232ECUE+ appears in the same-family comparison results, while the MAX3232EUE+T is identified as the 3.0 V-to-5.5 V, up-to-1-Mbps production device. Use the manufacturer data sheets to confirm data rate, protection, temperature range, and every connected pin before approving a replacement.
When should I choose MAX3232EUE+T over MAX3232CUE+T?
Choose the MAX3232EUE+T when the design needs the MAX3232E family's stated performance of up to 1 Mbps operation from a 3.0 V to 5.5 V supply. The MAX3232CUE+T is a related family member, but its exact operating and protection characteristics should be reviewed separately. The decision should be based on required data rate, operating temperature, ESD level, supply voltage, and package-level compatibility.
What is the best drop-in replacement for MAX3232EUE+T?
The closest documented same-family drop-in choices are the MAX3232ECUE+ and MAX3232CUE+T, both associated with the MAX3232 family and the same 16-pin TSSOP format. Neither should be approved solely from the family name; compare supply range, maximum data rate, driver and receiver assignments, charge-pump capacitor connections, temperature range, and ESD ratings against the MAX3232EUE+T data sheet before substitution.
What can replace MAX3232EUE+T on an existing PCB?
A replacement must use the same 16-pin TSSOP footprint and preserve the exact driver, receiver, charge-pump, power, and ground connections. The MAX3232ECUE+ and MAX3232CUE+T are the documented same-family candidates to evaluate. Because function labels do not guarantee identical electrical ratings, compare the manufacturer pin tables and operating limits, then verify the replacement with system-level RS-232 loopback and ESD testing.
Is MAX3232EUE+T the same as MAX3232EIDW?
The MAX3232EUE+T and MAX3232EIDW are closely related MAX3232E devices, but they use different package variants: the target is a 16-pin TSSOP while MAX3232EIDW uses a 16-pin SOIC. Because the body width, lead pitch, and board footprint differ, MAX3232EIDW is not a physical drop-in replacement for an existing TSSOP layout.
Where can I buy MAX3232EUE+T and check current lead time?
Use the Request a Quote form on this page to ask about MAX3232EUE+T availability, current lead time, and order quantity. The request can include the required reel quantity and any date-specific production requirement. This page does not maintain a static stock count, so obtain the current commitment directly through the quote workflow rather than relying on an outdated availability statement.
What is the price of MAX3232EUE+T?
The current unit price for MAX3232EUE+T depends on order quantity, packaging, and purchasing conditions. Submit the required quantity and target delivery date through the Request a Quote form on this page for a current quotation. The form is the appropriate route for price confirmation because electronic-component pricing and lead times can change independently of the product specifications.
Is MAX3232EUE+T in stock?
Current MAX3232EUE+T inventory should be confirmed through the Request a Quote form on this page. Include your required quantity, reel format, destination, and requested delivery date so the quotation can reflect current supply status. A packaging form marked with a tape-and-reel suffix should not be assumed to be available in the quantity needed for a production release.

Dữ liệu tham khảo kỹ thuật cho MAX3232EUE+T — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the MAX3232EUE+T when a design needs a 3.0 V-to-5.5 V true RS-232 interface with two drivers, two receivers, data rates up to 1 Mbps, and a 16-pin TSSOP footprint. It is particularly appropriate for 3.3 V embedded systems, industrial service ports, and compact controller boards. The MAX3232ECUE+ is the closest same-family candidate for PCB reuse, but its exact data rate, protection rating, and environmental limits must be verified before substitution. The MAX3232CUE+T is also a same-footprint family alternative; select it only after confirming that its electrical characteristics satisfy the application. The MAX3232EIDW is electrically related but uses an SOIC package, so it is unsuitable for direct reuse of a TSSOP layout without redesigning the PCB.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này MAX3232ECUE+ MAX3232CUE+T
Package 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP
Brand Analog Devices Analog Devices Analog Devices
Device Type Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver
Drivers / Receivers 2 / 2 2 / 2 2 / 2

Bảo phân biệt quan trọng

  • Supports true RS-232 from a 3.0 V supply (vsMAX3232ECUE+)
  • Compact 16-pin TSSOP implementation (vsMAX3232CUE+T)
  • Low external charge-pump support count (vsMAX3232ECUE+)

Ghi chú thiết kế

Place the four required 0.1 µF charge-pump capacitors as close as practical to the MAX3232EUE+T charge-pump pins. Keep each capacitor's ground connection short and use the ground-plane reference shown by the manufacturer's layout guidance. Avoid placing the capacitors beneath the TSSOP body or behind a dense row of unrelated signals, because longer charge-pump current paths can increase transient disturbance and reduce operating margin.

Route the connector-side driver outputs as differential-like RS-232 signals even though the interface is single-ended, and keep them separated from clocks, ADC inputs, and sensitive sensor lines. Preserve the ground return associated with the RS-232 connector, but avoid allowing large switching currents to share narrow paths with the transceiver ground. A clear separation between logic-side and cable-side routing improves noise immunity.

Do not assign RS-232 pins solely from signal names because several MAX3232-family pins support driver or receiver functions. Check the manufacturer's pin table for the exact configuration, verify the external charge-pump capacitor connections, and confirm logic polarity and hardware-flow direction. After assembly, perform a local driver-to-receiver loopback test before connecting equipment with potentially different grounding or signal conventions.

The charge pump is an internal switching source and can couple energy into nearby circuitry even though the interface itself uses a low-noise bipolar output. Keep sensitive analog traces away from the charge-pump capacitor network and provide a solid ground plane beneath the device where practical. If the board combines RS-232 with RF, audio, or precision measurement, validate conducted and radiated emissions with the final enclosure and cable configuration.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The manufacturer product page identifies MAX3232 as a production device, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was exposed in the cited records. AEC-Q100 status is not applicable to this general-purpose RS-232 transceiver.

Dữ liệu được xác minh vào: 2026-11-17 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

max3232eue+t datasheet MAX3232EUE+T MAX3232EUE+T datasheet pdf MAX3232EUE+T pinout MAX3232EUE+T TSSOP-16 MAX3232EUE+T equivalent MAX3232EUE+T replacement MAX3232EUE+T vs MAX3232ECUE+ MAX3232EUE+T vs MAX3232CUE+T Analog Devices MAX3232EUE+T MAX3232EUE+T price MAX3232EUE+T stock MAX3232EUE+T RS-232 interface MAX3232EUE+T 1 Mbps transceiver

Các bộ phận và thuật ngữ liên quan

Analog Devices MAX3232EUE+T MAX3232 MAX3232E MAX3232ECUE+ MAX3232CUE+T RS-232 transceiver interface IC line driver line receiver dual charge pump CMOS-compatible logic 3.3 V logic 5 V logic 1 Mbps data rate 0.1 µF charge-pump capacitor 300 µA quiescent current 300 ns transition time 16-pin TSSOP TSSOP package family surface-mount package industrial serial communication RS-232 interface serial port MAX3232EIDR
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ