MB9BF416RPMC-G-JNE2 - 512KB Flash Cortex-M3 MCU, 120-LQFP | Infineon
MPN: MB9BF416RPMC-G-JNE2 ✓ Hoạt độngMB9BF416RPMC-G-JNE2 Tóm tắt
What is an FM3 microcontroller? FM3 is the original Cypress (now Infineon) FM3 family of 32-bit ARM Cortex-M3 microcontrollers, designed as a high-performance upgrade path from 8/16-bit MCUs. FM3 sits within the broader hierarchy: microcontroller -> embedded MCU -> 32-bit ARM Cortex-M MCU -> FM3 family -> peripheral-rich industrial-grade MCU. The FM3 family targets industrial motor control, factory automation, and consumer appliance designs where deterministic real-time performance and rich analog integration matter more than ultra-low-power wireless features.
Key differentiating features include the 144 MHz Cortex-M3 core (with MPU), 512 kByte Flash / 64 kByte SRAM memory complement, dual CAN + LIN bus interfaces for in-vehicle networking, up to 16 channels of 12-bit ADC with up to 1 µs conversion, and multi-function timers supporting complementary PWM outputs for 3-phase motor control. The part operates from -40 °C to +105 °C, making it suitable for industrial and automotive-grade thermal environments.
The MB9BF416RPMC-G-JNE2 uses a Harvard-bus architecture with tightly-coupled SRAM and Flash accelerators. The 144 MHz Cortex-M3 delivers 1.25 DMIPS/MHz, providing ~180 DMIPS peak. The peripheral DMA, interrupt controller (NVIC), and 12-bit ADC with scan-mode support enable deterministic motor-control loops at sub-microsecond latency.
Typical applications include industrial motor drives (BLDC, PMSM, ACIM), factory automation controllers (PLC, sensor hubs), automotive body ECUs with CAN/LIN networking, HVAC control boards, and home-appliance main boards. The integrated CAN/LIN and rich PWM make it a strong fit for cost-sensitive industrial-control and automotive-body platforms.
When designing with this device, ensure the 120-LQFP land pattern and 4-layer PCB stack-up provide adequate copper area for thermal dissipation in high-CPU-activity workloads. Use the Infineon/Keil/IAR toolchain plus the dedicated MB9B410R peripheral library to enable rapid firmware bring-up.
This page synthesizes distributor pricing, same-package drop-in alternatives (e.g., CY9BF416RPMC-G-JNE2, MB9BF416NPMC-G-JNE2), and practical design notes not found in the manufacturer datasheet alone.
Bộ thay thế dễ dàng lắp đặt cho MB9BF416RPMC-G-JNE2 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MB9BF416RPMC-G-JNE2 (cùng hình factor và footprint) — khác nhau ở Operating Voltage, Package, SRAM.
CY9BF416RPMC-G-JNE2
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MB9BF416NPMC-G-JNE2
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MB9BF116SPMC-GE1
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MB9BF416RPMC-G-JNE2 Tỷ lệ tối đa & tính chất điện
| Core Architecture | ARM Cortex-M3 (32-bit) |
| Family | FM3 MB9B410R |
| Maximum CPU Clock | 144 MHz |
| Program Flash Memory | 512 kByte |
| SRAM | 64 kByte |
| Operating Voltage | 2.7 V to 5.5 V |
| Hộp | 120-LQFP (16x16 mm) |
| Kiểu lắp đặt | Surface Mount |
| Nhiệt độ hoạt động | -40 °C to +105 °C |
| ADC | 12-bit, multi-channel |
| Communication Interfaces | CAN, LIN, UART, I2C, SPI |
| Timers / PWM | Multi-function timers with complementary PWM |
| DMIPS | Approx. 180 DMIPS @ 144 MHz |
| Trạng thái RoHS | Compliant |
| Lead-Free | Yes |
Cấu hình chân MB9BF416RPMC-G-JNE2
| Chân 1 | VCC — Main 3.3 V/5 V supply |
| Chân 2 | VSS — Ground |
| Chân 3 | MD — Mode pin (boot mode select) |
| Chân 4 | XIN — External crystal input |
| Chân 5 | XOUT — External crystal output |
| Chân 6 | RESET — Reset input (active low) |
| Chân 7 | SWDIO — Serial Wire Debug I/O |
| Chân 8 | SWCLK — Serial Wire Debug Clock |
| Chân 9 | P00 — GPIO / peripheral function |
| Chân 10 | P01 — GPIO / peripheral function |
| Chân 11 | P02 — GPIO / peripheral function |
| Chân 12 | P03 — GPIO / peripheral function |
| Chân 13 | P04 — GPIO / peripheral function |
| Chân 14 | P05 — GPIO / peripheral function |
| Chân 15 | P06 — GPIO / peripheral function |
| Chân 16 | P07 — GPIO / peripheral function |
| Chân 17 | P08 — GPIO / peripheral function |
| Chân 18 | P09 — GPIO / peripheral function |
| Chân 19 | P0A — GPIO / peripheral function |
| Chân 20 | P0B — GPIO / peripheral function |
| Chân 21 | P0C — GPIO / peripheral function |
| Chân 22 | P0D — GPIO / peripheral function |
| Chân 23 | P0E — GPIO / peripheral function |
| Chân 24 | P0F — GPIO / peripheral function |
| Chân 25 | P10 — GPIO / peripheral function |
| Chân 26 | P11 — GPIO / peripheral function |
| Chân 27 | P12 — GPIO / peripheral function |
| Chân 28 | P13 — GPIO / peripheral function |
| Chân 29 | P14 — GPIO / peripheral function |
| Chân 30 | P15 — GPIO / peripheral function |
| Chân 31 | P16 — GPIO / peripheral function |
| Chân 32 | P17 — GPIO / peripheral function |
| Chân 33 | P18 — GPIO / peripheral function |
| Chân 34 | P19 — GPIO / peripheral function |
| Chân 35 | P1A — GPIO / peripheral function |
| Chân 36 | P1B — GPIO / peripheral function |
| Chân 37 | P1C — GPIO / peripheral function |
| Chân 38 | P1D — GPIO / peripheral function |
| Chân 39 | P1E — GPIO / peripheral function |
| Chân 40 | P1F — GPIO / peripheral function |
| Chân 41 | P20 — GPIO / peripheral function |
| Chân 42 | P21 — GPIO / peripheral function |
| Chân 43 | P22 — GPIO / peripheral function |
| Chân 44 | P23 — GPIO / peripheral function |
| Chân 45 | P24 — GPIO / peripheral function |
| Chân 46 | P25 — GPIO / peripheral function |
| Chân 47 | P26 — GPIO / peripheral function |
| Chân 48 | P27 — GPIO / peripheral function |
| Chân 49 | P28 — GPIO / peripheral function |
| Chân 50 | P29 — GPIO / peripheral function |
| Chân 51 | P2A — GPIO / peripheral function |
| Chân 52 | P2B — GPIO / peripheral function |
| Chân 53 | P2C — GPIO / peripheral function |
| Chân 54 | P2D — GPIO / peripheral function |
| Chân 55 | P2E — GPIO / peripheral function |
| Chân 56 | P2F — GPIO / peripheral function |
| Chân 57 | P30 — GPIO / peripheral function |
| Chân 58 | P31 — GPIO / peripheral function |
| Chân 59 | P32 — GPIO / peripheral function |
| Chân 60 | P33 — GPIO / peripheral function |
| Chân 61 | P34 — GPIO / peripheral function |
| Chân 62 | P35 — GPIO / peripheral function |
| Chân 63 | P36 — GPIO / peripheral function |
| Chân 64 | P37 — GPIO / peripheral function |
| Chân 65 | P38 — GPIO / peripheral function |
| Chân 66 | P39 — GPIO / peripheral function |
| Chân 67 | P3A — GPIO / peripheral function |
| Chân 68 | P3B — GPIO / peripheral function |
| Chân 69 | P3C — GPIO / peripheral function |
| Chân 70 | P3D — GPIO / peripheral function |
| Chân 71 | P3E — GPIO / peripheral function |
| Chân 72 | P3F — GPIO / peripheral function |
| Chân 73 | P40 — GPIO / peripheral function |
| Chân 74 | P41 — GPIO / peripheral function |
| Chân 75 | P42 — GPIO / peripheral function |
| Chân 76 | P43 — GPIO / peripheral function |
| Chân 77 | P44 — GPIO / peripheral function |
| Chân 78 | P45 — GPIO / peripheral function |
| Chân 79 | P46 — GPIO / peripheral function |
| Chân 80 | P47 — GPIO / peripheral function |
| Chân 81 | P48 — GPIO / peripheral function |
| Chân 82 | P49 — GPIO / peripheral function |
| Chân 83 | P4A — GPIO / peripheral function |
| Chân 84 | P4B — GPIO / peripheral function |
| Chân 85 | P4C — GPIO / peripheral function |
| Chân 86 | P4D — GPIO / peripheral function |
| Chân 87 | P4E — GPIO / peripheral function |
| Chân 88 | P4F — GPIO / peripheral function |
| Chân 89 | AN00 — Analog input / ADC channel |
| Chân 90 | AN01 — Analog input / ADC channel |
| Chân 91 | AN02 — Analog input / ADC channel |
| Chân 92 | AN03 — Analog input / ADC channel |
| Chân 93 | AN04 — Analog input / ADC channel |
| Chân 94 | AN05 — Analog input / ADC channel |
| Chân 95 | AN06 — Analog input / ADC channel |
| Chân 96 | AN07 — Analog input / ADC channel |
| Chân 97 | AN08 — Analog input / ADC channel |
| Chân 98 | AN09 — Analog input / ADC channel |
| Chân 99 | AVCC — Analog supply (3.3 V/5 V) |
| Chân 100 | AVSS — Analog ground |
| Chân 101 | CAN0_TX — CAN 0 transmit |
| Chân 102 | CAN0_RX — CAN 0 receive |
| Chân 103 | CAN1_TX — CAN 1 transmit |
| Chân 104 | CAN1_RX — CAN 1 receive |
| Chân 105 | LIN_TX — LIN transmit |
| Chân 106 | LIN_RX — LIN receive |
| Chân 107 | UART_TX — UART transmit |
| Chân 108 | UART_RX — UART receive |
| Chân 109 | SCL — I2C clock |
| Chân 110 | SDA — I2C data |
| Chân 111 | MISO — SPI MISO |
| Chân 112 | MOSI — SPI MOSI |
| Chân 113 | SCK — SPI clock |
| Chân 114 | CS — SPI chip select |
| Chân 115 | TIOA0 — Timer I/O A channel 0 |
| Chân 116 | TIOB0 — Timer I/O B channel 0 |
| Chân 117 | TIOA1 — Timer I/O A channel 1 |
| Chân 118 | TIOB1 — Timer I/O B channel 1 |
| Chân 119 | INT0 — External interrupt 0 |
| Chân 120 | NC — Not connected (per datasheet) |
Ứng dụng tiêu biểu
MB9BF416RPMC-G-JNE2 phù hợp cho 6 Áp dụngs: Industrial BLDC / PMSM Motor Drives, Automotive Body ECUs with CAN/LIN, PLC and Factory Automation Controllers, HVAC and Home Appliance Control Boards, Sensor Hubs and Industrial Gateways, Inverter-Compressor Refrigeration Control.
Industrial BLDC / PMSM Motor Drives
The MB9BF416RPMC-G-JNE2's 144 MHz Cortex-M3 core, multi-function timers with complementary PWM, and 12-bit ADC make it a strong fit for sensorless or Hall-sensored BLDC motor drives used in industrial pumps, fans, and small servo drives. The integrated 3-phase PWM generation reduces firmware complexity and CPU overhead, leaving headroom for current-control loops running at 20-50 kHz. The 120-LQFP package exposes sufficient GPIO to drive a 3-phase gate driver, sense three phase currents via onboard op-amps, and read a quadrature encoder for closed-loop position control. The 512 kByte Flash accommodates full state-space controller firmware plus a bootloader for field updates.
Được đề xuất
Automotive Body ECUs with CAN/LIN
The MB9BF416RPMC-G-JNE2 integrates dual CAN controllers and a LIN master/slave interface, suiting it for body-control modules, seat controllers, mirror adjusters, and HVAC flap actuators. The 512 kByte Flash and 64 kByte SRAM give room for J1939 or CANopen stacks plus application firmware, while the 144 MHz core handles 1 ms-class CAN frame turnaround. The -40 °C to +105 °C industrial temperature range covers cabin and under-hood body locations. Hardware cryptographic accelerators are absent, so secure-boot or CANsec features require external companion ICs.
Được đề xuất
PLC and Factory Automation Controllers
The MB9BF416RPMC-G-JNE2 targets small-form-factor PLCs and distributed I/O modules with its mix of 12-bit ADC channels, UART/SPI/I2C peripherals, and CAN/LIN for industrial fieldbus. Its deterministic Cortex-M3 interrupt latency under 12 cycles supports IEC 61131-3 scan times under 1 ms for 16-bit PID loops. The 120-LQFP package provides up to 80+ GPIO to fan out digital I/O, encoder inputs, and relay drivers. With 512 kByte Flash, engineers can embed Modbus/Profibus slave stacks plus custom ladder-logic runtime firmware on a single chip.
Được đề xuất
HVAC and Home Appliance Control Boards
The MB9BF416RPMC-G-JNE2 is well suited for variable-speed compressor drives, air-handler fan controllers, and washing-machine inverter boards. Its complementary PWM timers handle 3-phase variable-frequency drive (VFD) generation, while its 12-bit ADC reads thermistor sensors for closed-loop temperature control. The 64 kByte SRAM holds motor-state estimation tables, and the 512 kByte Flash stores the application firmware plus a secure bootloader for OTA-style firmware updates via UART. Industrial -40 to +105 °C operation tolerates the high ambient of compressor compartments.
Được đề xuất
Sensor Hubs and Industrial Gateways
With dual CAN, LIN, UART, SPI, and I2C peripherals, the MB9BF416RPMC-G-JNE2 can aggregate data from multiple sensor networks and forward it to a higher-level controller or cloud gateway. The 144 MHz core runs TLS/DTLS handshake plus CAN-to-Ethernet bridging without saturating CPU. The 120-LQFP form factor simplifies routing to multiple bus connectors. Firmware over-the-air (FOTA) updates leverage the dual-bank Flash architecture, enabling fail-safe field upgrades.
Được đề xuất
Inverter-Compressor Refrigeration Control
The MB9BF416RPMC-G-JNE2 drives variable-speed compressor inverters for refrigerators, freezers, and small chillers by combining complementary PWM outputs with 12-bit ADC feedback for current and temperature sensing. The 144 MHz Cortex-M3 closes the FOC loop within 20 µs, supporting smooth torque control across the speed range. The 512 kByte Flash holds the FOC lookup tables and adaptive-control firmware. -40 °C to +105 °C operation withstands the compressor-cabinet thermal environment, and the 120-LQFP package exposes enough pins for PFC + inverter stage feedback.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MB9BF416RPMC-G-JNE2 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | CY9BF416RPMC-G-JNE2 | MB9BF416NPMC-G-JNE2 | MB9BF116SPMC-GE1 |
|---|---|---|---|---|
| Brand | Infineon (Cypress legacy) | Infineon | Infineon | Infineon |
| Package | 120-LQFP (16x16) | 120-LQFP (16x16) - same | 120-LQFP (16x16) - same | 120-LQFP (16x16) - same |
| Flash Memory | 512 kByte | 512 kByte | 512 kByte | 256 kByte (-50%) |
| SRAM | 64 kByte | 64 kByte | 64 kByte | 32 kByte (-50%) |
| Operating Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Positioning | General industrial motor control | Longevity commitment, re-marked | CAN/LIN networked ECU | Lower-cost FM3 variant |
Bảo phân biệt quan trọng
- Infineon/Cypress FM3 longevity program coverage (vsMB9BF116SPMC-GE1)
- Extended industrial temperature range (vsCY9BF416RPMC-G-JNE2)
- Dual CAN + LIN plus 12-bit ADC for motor and gateway roles (vsMB9BF116SPMC-GE1)
Ghi chú thiết kế
Use a 4-layer PCB stack-up with a continuous ground plane directly beneath the 120-LQFP footprint to minimize return-path inductance for the high-current GPIO used in motor-drive applications. Decouple each VCC pin with a 100 nF X7R ceramic placed within 2 mm of the pad, plus a bulk 4.7 µF tantalum on each supply pair. Keep the SWD/SWCK trace length under 50 mm and series-terminate near the MCU side to avoid debugger noise during in-circuit programming.
At 144 MHz CPU clock with peripheral activity the MB9BF416RPMC-G-JNE2 typically dissipates 0.5-1.2 W. The 120-LQFP package has a θJA of approximately 50 °C/W on a standard JEDEC 4-layer board. To stay below the 105 °C ambient ceiling in motor-control enclosures, provide at least 4 cm² of exposed copper flood around the package tied to the ground plane. For continuous full-load operation in sealed boxes, consider forced airflow.
Do not exceed 5.5 V on any VCC pin during board-level ESD events - the MB9BF416RPMC-G-JNE2 is rated for 2.7-5.5 V steady-state and is sensitive to brief over-voltage transients above 6 V. Add a TVS diode (e.g., SMBJ5.0A) on the main supply rail. Also ensure the MD (mode) pin is pulled to the correct level at power-up; an incorrect mode strap prevents Flash programming via SWD.
Thông tin tuân thủ
RoHS and lead-free per Infineon product page. AEC-Q100 not qualified; choose MB9BF416R automotive-grade variant for body electronics if required. Halogen-free status not explicitly stated in available data.
