MB9BF416RPMC-G-JNE2 - 512KB Flash Cortex-M3 MCU, 120-LQFP | Infineon
MPN： MB9BF416RPMC-G-JNE2 ✓ 啟用中MB9BF416RPMC-G-JNE2 概覽
What is an FM3 microcontroller? FM3 is the original Cypress (now Infineon) FM3 family of 32-bit ARM Cortex-M3 microcontrollers, designed as a high-performance upgrade path from 8/16-bit MCUs. FM3 sits within the broader hierarchy: microcontroller -> embedded MCU -> 32-bit ARM Cortex-M MCU -> FM3 family -> peripheral-rich industrial-grade MCU. The FM3 family targets industrial motor control, factory automation, and consumer appliance designs where deterministic real-time performance and rich analog integration matter more than ultra-low-power wireless features.
Key differentiating features include the 144 MHz Cortex-M3 core (with MPU), 512 kByte Flash / 64 kByte SRAM memory complement, dual CAN + LIN bus interfaces for in-vehicle networking, up to 16 channels of 12-bit ADC with up to 1 µs conversion, and multi-function timers supporting complementary PWM outputs for 3-phase motor control. The part operates from -40 °C to +105 °C, making it suitable for industrial and automotive-grade thermal environments.
The MB9BF416RPMC-G-JNE2 uses a Harvard-bus architecture with tightly-coupled SRAM and Flash accelerators. The 144 MHz Cortex-M3 delivers 1.25 DMIPS/MHz, providing ~180 DMIPS peak. The peripheral DMA, interrupt controller (NVIC), and 12-bit ADC with scan-mode support enable deterministic motor-control loops at sub-microsecond latency.
Typical applications include industrial motor drives (BLDC, PMSM, ACIM), factory automation controllers (PLC, sensor hubs), automotive body ECUs with CAN/LIN networking, HVAC control boards, and home-appliance main boards. The integrated CAN/LIN and rich PWM make it a strong fit for cost-sensitive industrial-control and automotive-body platforms.
When designing with this device, ensure the 120-LQFP land pattern and 4-layer PCB stack-up provide adequate copper area for thermal dissipation in high-CPU-activity workloads. Use the Infineon/Keil/IAR toolchain plus the dedicated MB9B410R peripheral library to enable rapid firmware bring-up.
This page synthesizes distributor pricing, same-package drop-in alternatives (e.g., CY9BF416RPMC-G-JNE2, MB9BF416NPMC-G-JNE2), and practical design notes not found in the manufacturer datasheet alone.
直接替換替代品，適用於 MB9BF416RPMC-G-JNE2 — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： MB9BF416RPMC-G-JNE2 （相同外形與佔位） — 差異在於 Operating Voltage, Package, SRAM.
CY9BF416RPMC-G-JNE2
✅ 直接替換📋 參考替代品（不在目錄中）
MB9BF416NPMC-G-JNE2
✅ 直接替換聯絡詢價
查看資料表 →MB9BF116SPMC-GE1
✅ 直接替換📋 參考替代品（不在目錄中）
MB9BF416RPMC-G-JNE2 最大額定值與電氣特性
| Core Architecture | ARM Cortex-M3 (32-bit) |
| Family | FM3 MB9B410R |
| Maximum CPU Clock | 144 MHz |
| Program Flash Memory | 512 kByte |
| SRAM | 64 kByte |
| Operating Voltage | 2.7 V to 5.5 V |
| 封裝 | 120-LQFP (16x16 mm) |
| 安裝類型 | Surface Mount |
| 工作溫度 | -40 °C to +105 °C |
| ADC | 12-bit, multi-channel |
| Communication Interfaces | CAN, LIN, UART, I2C, SPI |
| Timers / PWM | Multi-function timers with complementary PWM |
| DMIPS | Approx. 180 DMIPS @ 144 MHz |
| RoHS 狀態 | Compliant |
| Lead-Free | Yes |
MB9BF416RPMC-G-JNE2 腳位配置
| 腳位 1 | VCC — Main 3.3 V/5 V supply |
| 腳位 2 | VSS — Ground |
| 腳位 3 | MD — Mode pin (boot mode select) |
| 腳位 4 | XIN — External crystal input |
| 腳位 5 | XOUT — External crystal output |
| 腳位 6 | RESET — Reset input (active low) |
| 腳位 7 | SWDIO — Serial Wire Debug I/O |
| 腳位 8 | SWCLK — Serial Wire Debug Clock |
| 腳位 9 | P00 — GPIO / peripheral function |
| 腳位 10 | P01 — GPIO / peripheral function |
| 腳位 11 | P02 — GPIO / peripheral function |
| 腳位 12 | P03 — GPIO / peripheral function |
| 腳位 13 | P04 — GPIO / peripheral function |
| 腳位 14 | P05 — GPIO / peripheral function |
| 腳位 15 | P06 — GPIO / peripheral function |
| 腳位 16 | P07 — GPIO / peripheral function |
| 腳位 17 | P08 — GPIO / peripheral function |
| 腳位 18 | P09 — GPIO / peripheral function |
| 腳位 19 | P0A — GPIO / peripheral function |
| 腳位 20 | P0B — GPIO / peripheral function |
| 腳位 21 | P0C — GPIO / peripheral function |
| 腳位 22 | P0D — GPIO / peripheral function |
| 腳位 23 | P0E — GPIO / peripheral function |
| 腳位 24 | P0F — GPIO / peripheral function |
| 腳位 25 | P10 — GPIO / peripheral function |
| 腳位 26 | P11 — GPIO / peripheral function |
| 腳位 27 | P12 — GPIO / peripheral function |
| 腳位 28 | P13 — GPIO / peripheral function |
| 腳位 29 | P14 — GPIO / peripheral function |
| 腳位 30 | P15 — GPIO / peripheral function |
| 腳位 31 | P16 — GPIO / peripheral function |
| 腳位 32 | P17 — GPIO / peripheral function |
| 腳位 33 | P18 — GPIO / peripheral function |
| 腳位 34 | P19 — GPIO / peripheral function |
| 腳位 35 | P1A — GPIO / peripheral function |
| 腳位 36 | P1B — GPIO / peripheral function |
| 腳位 37 | P1C — GPIO / peripheral function |
| 腳位 38 | P1D — GPIO / peripheral function |
| 腳位 39 | P1E — GPIO / peripheral function |
| 腳位 40 | P1F — GPIO / peripheral function |
| 腳位 41 | P20 — GPIO / peripheral function |
| 腳位 42 | P21 — GPIO / peripheral function |
| 腳位 43 | P22 — GPIO / peripheral function |
| 腳位 44 | P23 — GPIO / peripheral function |
| 腳位 45 | P24 — GPIO / peripheral function |
| 腳位 46 | P25 — GPIO / peripheral function |
| 腳位 47 | P26 — GPIO / peripheral function |
| 腳位 48 | P27 — GPIO / peripheral function |
| 腳位 49 | P28 — GPIO / peripheral function |
| 腳位 50 | P29 — GPIO / peripheral function |
| 腳位 51 | P2A — GPIO / peripheral function |
| 腳位 52 | P2B — GPIO / peripheral function |
| 腳位 53 | P2C — GPIO / peripheral function |
| 腳位 54 | P2D — GPIO / peripheral function |
| 腳位 55 | P2E — GPIO / peripheral function |
| 腳位 56 | P2F — GPIO / peripheral function |
| 腳位 57 | P30 — GPIO / peripheral function |
| 腳位 58 | P31 — GPIO / peripheral function |
| 腳位 59 | P32 — GPIO / peripheral function |
| 腳位 60 | P33 — GPIO / peripheral function |
| 腳位 61 | P34 — GPIO / peripheral function |
| 腳位 62 | P35 — GPIO / peripheral function |
| 腳位 63 | P36 — GPIO / peripheral function |
| 腳位 64 | P37 — GPIO / peripheral function |
| 腳位 65 | P38 — GPIO / peripheral function |
| 腳位 66 | P39 — GPIO / peripheral function |
| 腳位 67 | P3A — GPIO / peripheral function |
| 腳位 68 | P3B — GPIO / peripheral function |
| 腳位 69 | P3C — GPIO / peripheral function |
| 腳位 70 | P3D — GPIO / peripheral function |
| 腳位 71 | P3E — GPIO / peripheral function |
| 腳位 72 | P3F — GPIO / peripheral function |
| 腳位 73 | P40 — GPIO / peripheral function |
| 腳位 74 | P41 — GPIO / peripheral function |
| 腳位 75 | P42 — GPIO / peripheral function |
| 腳位 76 | P43 — GPIO / peripheral function |
| 腳位 77 | P44 — GPIO / peripheral function |
| 腳位 78 | P45 — GPIO / peripheral function |
| 腳位 79 | P46 — GPIO / peripheral function |
| 腳位 80 | P47 — GPIO / peripheral function |
| 腳位 81 | P48 — GPIO / peripheral function |
| 腳位 82 | P49 — GPIO / peripheral function |
| 腳位 83 | P4A — GPIO / peripheral function |
| 腳位 84 | P4B — GPIO / peripheral function |
| 腳位 85 | P4C — GPIO / peripheral function |
| 腳位 86 | P4D — GPIO / peripheral function |
| 腳位 87 | P4E — GPIO / peripheral function |
| 腳位 88 | P4F — GPIO / peripheral function |
| 腳位 89 | AN00 — Analog input / ADC channel |
| 腳位 90 | AN01 — Analog input / ADC channel |
| 腳位 91 | AN02 — Analog input / ADC channel |
| 腳位 92 | AN03 — Analog input / ADC channel |
| 腳位 93 | AN04 — Analog input / ADC channel |
| 腳位 94 | AN05 — Analog input / ADC channel |
| 腳位 95 | AN06 — Analog input / ADC channel |
| 腳位 96 | AN07 — Analog input / ADC channel |
| 腳位 97 | AN08 — Analog input / ADC channel |
| 腳位 98 | AN09 — Analog input / ADC channel |
| 腳位 99 | AVCC — Analog supply (3.3 V/5 V) |
| 腳位 100 | AVSS — Analog ground |
| 腳位 101 | CAN0_TX — CAN 0 transmit |
| 腳位 102 | CAN0_RX — CAN 0 receive |
| 腳位 103 | CAN1_TX — CAN 1 transmit |
| 腳位 104 | CAN1_RX — CAN 1 receive |
| 腳位 105 | LIN_TX — LIN transmit |
| 腳位 106 | LIN_RX — LIN receive |
| 腳位 107 | UART_TX — UART transmit |
| 腳位 108 | UART_RX — UART receive |
| 腳位 109 | SCL — I2C clock |
| 腳位 110 | SDA — I2C data |
| 腳位 111 | MISO — SPI MISO |
| 腳位 112 | MOSI — SPI MOSI |
| 腳位 113 | SCK — SPI clock |
| 腳位 114 | CS — SPI chip select |
| 腳位 115 | TIOA0 — Timer I/O A channel 0 |
| 腳位 116 | TIOB0 — Timer I/O B channel 0 |
| 腳位 117 | TIOA1 — Timer I/O A channel 1 |
| 腳位 118 | TIOB1 — Timer I/O B channel 1 |
| 腳位 119 | INT0 — External interrupt 0 |
| 腳位 120 | NC — Not connected (per datasheet) |
典型應用
MB9BF416RPMC-G-JNE2 適用於 6 應用s: Industrial BLDC / PMSM Motor Drives, Automotive Body ECUs with CAN/LIN, PLC and Factory Automation Controllers, HVAC and Home Appliance Control Boards, Sensor Hubs and Industrial Gateways, Inverter-Compressor Refrigeration Control.
Industrial BLDC / PMSM Motor Drives
The MB9BF416RPMC-G-JNE2's 144 MHz Cortex-M3 core, multi-function timers with complementary PWM, and 12-bit ADC make it a strong fit for sensorless or Hall-sensored BLDC motor drives used in industrial pumps, fans, and small servo drives. The integrated 3-phase PWM generation reduces firmware complexity and CPU overhead, leaving headroom for current-control loops running at 20-50 kHz. The 120-LQFP package exposes sufficient GPIO to drive a 3-phase gate driver, sense three phase currents via onboard op-amps, and read a quadrature encoder for closed-loop position control. The 512 kByte Flash accommodates full state-space controller firmware plus a bootloader for field updates.
推薦
Automotive Body ECUs with CAN/LIN
The MB9BF416RPMC-G-JNE2 integrates dual CAN controllers and a LIN master/slave interface, suiting it for body-control modules, seat controllers, mirror adjusters, and HVAC flap actuators. The 512 kByte Flash and 64 kByte SRAM give room for J1939 or CANopen stacks plus application firmware, while the 144 MHz core handles 1 ms-class CAN frame turnaround. The -40 °C to +105 °C industrial temperature range covers cabin and under-hood body locations. Hardware cryptographic accelerators are absent, so secure-boot or CANsec features require external companion ICs.
推薦
PLC and Factory Automation Controllers
The MB9BF416RPMC-G-JNE2 targets small-form-factor PLCs and distributed I/O modules with its mix of 12-bit ADC channels, UART/SPI/I2C peripherals, and CAN/LIN for industrial fieldbus. Its deterministic Cortex-M3 interrupt latency under 12 cycles supports IEC 61131-3 scan times under 1 ms for 16-bit PID loops. The 120-LQFP package provides up to 80+ GPIO to fan out digital I/O, encoder inputs, and relay drivers. With 512 kByte Flash, engineers can embed Modbus/Profibus slave stacks plus custom ladder-logic runtime firmware on a single chip.
推薦
HVAC and Home Appliance Control Boards
The MB9BF416RPMC-G-JNE2 is well suited for variable-speed compressor drives, air-handler fan controllers, and washing-machine inverter boards. Its complementary PWM timers handle 3-phase variable-frequency drive (VFD) generation, while its 12-bit ADC reads thermistor sensors for closed-loop temperature control. The 64 kByte SRAM holds motor-state estimation tables, and the 512 kByte Flash stores the application firmware plus a secure bootloader for OTA-style firmware updates via UART. Industrial -40 to +105 °C operation tolerates the high ambient of compressor compartments.
推薦
Sensor Hubs and Industrial Gateways
With dual CAN, LIN, UART, SPI, and I2C peripherals, the MB9BF416RPMC-G-JNE2 can aggregate data from multiple sensor networks and forward it to a higher-level controller or cloud gateway. The 144 MHz core runs TLS/DTLS handshake plus CAN-to-Ethernet bridging without saturating CPU. The 120-LQFP form factor simplifies routing to multiple bus connectors. Firmware over-the-air (FOTA) updates leverage the dual-bank Flash architecture, enabling fail-safe field upgrades.
推薦
Inverter-Compressor Refrigeration Control
The MB9BF416RPMC-G-JNE2 drives variable-speed compressor inverters for refrigerators, freezers, and small chillers by combining complementary PWM outputs with 12-bit ADC feedback for current and temperature sensing. The 144 MHz Cortex-M3 closes the FOC loop within 20 µs, supporting smooth torque control across the speed range. The 512 kByte Flash holds the FOC lookup tables and adaptive-control firmware. -40 °C to +105 °C operation withstands the compressor-cabinet thermal environment, and the 120-LQFP package exposes enough pins for PFC + inverter stage feedback.
推薦
推薦產品摘要
工程參考資料，適用於 MB9BF416RPMC-G-JNE2 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | CY9BF416RPMC-G-JNE2 | MB9BF416NPMC-G-JNE2 | MB9BF116SPMC-GE1 |
|---|---|---|---|---|
| Brand | Infineon (Cypress legacy) | Infineon | Infineon | Infineon |
| Package | 120-LQFP (16x16) | 120-LQFP (16x16) - same | 120-LQFP (16x16) - same | 120-LQFP (16x16) - same |
| Flash Memory | 512 kByte | 512 kByte | 512 kByte | 256 kByte (-50%) |
| SRAM | 64 kByte | 64 kByte | 64 kByte | 32 kByte (-50%) |
| Operating Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Positioning | General industrial motor control | Longevity commitment, re-marked | CAN/LIN networked ECU | Lower-cost FM3 variant |
主要差異化特點
- Infineon/Cypress FM3 longevity program coverage (對比MB9BF116SPMC-GE1)
- Extended industrial temperature range (對比CY9BF416RPMC-G-JNE2)
- Dual CAN + LIN plus 12-bit ADC for motor and gateway roles (對比MB9BF116SPMC-GE1)
設計說明
Use a 4-layer PCB stack-up with a continuous ground plane directly beneath the 120-LQFP footprint to minimize return-path inductance for the high-current GPIO used in motor-drive applications. Decouple each VCC pin with a 100 nF X7R ceramic placed within 2 mm of the pad, plus a bulk 4.7 µF tantalum on each supply pair. Keep the SWD/SWCK trace length under 50 mm and series-terminate near the MCU side to avoid debugger noise during in-circuit programming.
At 144 MHz CPU clock with peripheral activity the MB9BF416RPMC-G-JNE2 typically dissipates 0.5-1.2 W. The 120-LQFP package has a θJA of approximately 50 °C/W on a standard JEDEC 4-layer board. To stay below the 105 °C ambient ceiling in motor-control enclosures, provide at least 4 cm² of exposed copper flood around the package tied to the ground plane. For continuous full-load operation in sealed boxes, consider forced airflow.
Do not exceed 5.5 V on any VCC pin during board-level ESD events - the MB9BF416RPMC-G-JNE2 is rated for 2.7-5.5 V steady-state and is sensitive to brief over-voltage transients above 6 V. Add a TVS diode (e.g., SMBJ5.0A) on the main supply rail. Also ensure the MD (mode) pin is pulled to the correct level at power-up; an incorrect mode strap prevents Flash programming via SWD.
合規資訊
RoHS and lead-free per Infineon product page. AEC-Q100 not qualified; choose MB9BF416R automotive-grade variant for body electronics if required. Halogen-free status not explicitly stated in available data.
