MPC565MZP56 - 56MHz PowerPC MCU 1MB Flash | NXP | 388-PBGA
MPN: MPC565MZP56 ⚠ Lần mua cuốiMPC565MZP56 Tóm tắt
A microcontroller (MCU) is a single-chip computer integrating a CPU, memory, and peripherals. The MPC565 belongs to the Power Architecture family, which evolved from the PowerPC standard. Within the broader taxonomy, MCUs sit beneath microprocessors and above general-purpose processors; the MPC500 family specifically targets embedded control with deterministic interrupt response and integrated analog peripherals that would otherwise require external components.
Key features of the MPC565 include its PowerPC core with 4-stage pipeline, single-precision floating-point unit, 36 KB of SRAM, dual CAN 2.0B controllers, two enhanced queued analog-to-digital converter (eQADC) modules, and a Time Processing Unit (TPU) for complex timing. The 1 MB embedded Flash supports code compression, reducing effective code footprint. A flexible memory protection unit and ECC on critical memories increase reliability for safety-critical automotive subsystems such as engine management, transmission control, and chassis electronics.
Typical applications include automotive engine control units (ECUs), automatic transmission controllers, electronic stability programs, body and convenience modules, and industrial motor drives. The wide peripheral mix and automotive-grade qualification make it equally suitable for aerospace flight control prototypes and heavy machinery control units requiring robust environmental performance.
Bộ thay thế dễ dàng lắp đặt cho MPC565MZP56 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MPC565MZP56 (cùng hình factor và footprint) — khác nhau ở Core Architecture, Operating Temperature, Code Compression, Package, Floating Point Unit.
MPC566AZP56
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MPC565CZP56
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MPC564CZP66
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MPC566MZP56
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →SPC565MZP56D
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MPC565MZP56 Tỷ lệ tối đa & tính chất điện
| Core Architecture | PowerPC MPC5xx (Power Architecture) |
| Core Frequency | 56 MHz |
| Bề rộng đường dữ liệu | 32-bit |
| Program Memory Size | 1 MB (1M x 8) Flash |
| RAM Size | 36 KB SRAM |
| Điện áp cung cấp hoạt động | 2.6 V / 5 V |
| Hộp | 388-PBGA (27x27 mm) |
| Kiểu lắp đặt | Surface Mount |
| Nhiệt độ hoạt động | -40C to +125C (Automotive) |
| Qualification | AEC-Q100 |
| FPU | Yes (single-precision floating-point unit) |
| CAN Controllers | 2x CAN 2.0B |
| ADC | 2x enhanced queued ADC (eQADC) |
| Timing Coprocessor | Time Processing Unit (TPU) |
| Code Compression | Yes |
| Memory Protection | Yes (MPU with ECC) |
Hướng dẫn cấu hình chân MPC565MZP56 388-pbga (27x27 mm)
Cấu hình chân cho MPC565MZP56 (388-pbga (27x27 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho MPC565MZP56.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MPC565MZP56 phù hợp cho 6 Áp dụngs: Automotive Engine Management ECU, Automatic Transmission Controller, Electronic Stability Program (ESP) Module, Industrial Servo Motor Drive, Aerospace Flight Control Prototype, Body and Convenience Control Module.
Automotive Engine Management ECU
The MPC565MZP56's 56 MHz PowerPC core, 36 KB SRAM, and 1 MB Flash make it well-suited to engine management ECUs where deterministic fuel injection and ignition timing are required. The integrated eQADC modules simultaneously sample crank position, O2 sensors, and knock inputs within microsecond latency windows. AEC-Q100 qualification at -40C to +125C supports underhood mounting, while the FPU accelerates complex combustion and knock-control math.
Được đề xuất
Automatic Transmission Controller
Transmission control units require the MPC565MZP56's dual CAN 2.0B controllers for vehicle network communication and the TPU for precise shift scheduling and torque converter clutch control. The integrated 1 MB Flash stores shift maps and adaptive learning parameters without external memory, simplifying board layout in tight transmission housings. Real-time interrupt response from the PowerPC core keeps shift quality consistent across temperature and battery voltage extremes.
Được đề xuất
Electronic Stability Program (ESP) Module
ESP modules leverage the MPC565MZP56's real-time deterministic core plus eQADC inputs to read wheel speed sensors at sub-millisecond cadence and produce corrective brake interventions. Floating-point math enables complex vehicle dynamics models for yaw-rate compensation. The 388-BGA package supports dense PCB integration within brake-system enclosures, while AEC-Q100 grade tolerates the brake-system thermal environment.
Được đề xuất
Industrial Servo Motor Drive
Industrial servo drives exploit the MPC565MZP56's TPU to generate high-resolution PWM waveforms driving three-phase inverters feeding brushless servo motors. The PowerPC FPU runs field-oriented control algorithms at cycle rates short enough to maintain torque smoothness. Wide -40C to +125C temperature operation and ECC memory protection let servo drives operate on factory floors with high electrical noise and vibration without compromising reliability.
Được đề xuất
Aerospace Flight Control Prototype
Aerospace flight control prototypes use the MPC565MZP56's deterministic PowerPC core and ECC-protected SRAM for redundant actuation path computations. The 56 MHz clock and FPU support real-time Kalman filtering and actuator mixing for unmanned aerial vehicle flight controllers. AEC-Q100 qualification provides documented reliability evidence useful when prototyping in aerospace channels, and the rich peripheral mix minimizes external component count in compact UAV payloads.
Được đề xuất
Body and Convenience Control Module
Body control modules use the MPC565MZP56's CAN 2.0B controllers to network lighting, door, and climate subsystems, with the eQADC reading analog sensor inputs such as ambient light and battery current. Code compression squeezes more application code into the 1 MB Flash footprint, leaving headroom for customer-specific feature sets. The wide temperature range allows direct underhood or cabin mounting across vehicle platforms.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MPC565MZP56 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MPC566AZP56 | MPC565CZP56 | MPC564CZP66 | SPC565MZP56D |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 388-PBGA (27x27 mm) | 388-PBGA (27x27 mm) - same | 388-PBGA (27x27 mm) - same | 388-PBGA (27x27 mm) - same | 388-PBGA (27x27 mm) - same |
| Core Frequency | 56 MHz | 56 MHz | 56 MHz | 66 MHz (+18%) | 56 MHz |
| Flash Memory | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB |
| FPU | Single-precision | Dual-precision (+) | Single-precision | Single-precision | Single-precision |
| Code Compression (BCC) | Yes | Yes (enhanced) | Yes | Yes | Yes |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C |
| AEC-Q100 Qualification | Qualified | Qualified | Qualified | Qualified | Qualified |
| Lifecycle Status | Last Time Buy | Last Time Buy | Last Time Buy | Last Time Buy | Active |
Bảo phân biệt quan trọng
- AEC-Q100 qualified 32-bit automotive MCU with FPU in 388-BGA (vsMPC563MVR56R2)
- Same pinout as SPC565MZP56D safety successor (vsSPC565MZP56D)
- 388-pin BGA offers the highest peripheral density in MPC5xx (vsMPC565CZP56)
Ghi chú thiết kế
The 388-BGA package dissipates significant power when operating at 56 MHz with all peripherals active. Estimated: with 0.5 W internal dissipation at full load, the junction-to-ambient temperature rise is roughly theta_JA multiplied by dissipated power; for the 27x27 mm package the safe operating area requires a PCB thermal pad and thermal vias to maintain junction temperature below 150C under hood conditions. Use copper pours on inner layers to spread heat in the ECU enclosure.
The 388-BGA package demands a 1.0 mm or finer pitch PCB layout with controlled-impedance routing for the external bus interface. Use microvia stackups for escape routing under the BGA, and place decoupling capacitors within 1-2 mm of all power pins. Matched-length tracking of the SDRAM interface is critical for reliable operation above 50 MHz. Reference NXP's AN-2949 layout guide for BGA escape patterns.
Do not assume the MPC565MZP56 firmware binary is portable to the SPC565MZP56D despite identical pinout - the memory map and peripheral register definitions differ. Validate register-level compatibility before porting code. Also, the part is on Last Time Buy so design safety stock using Next-Nexpedite or buffer orders to avoid line-down situations. Plan Last Time Buy quantities with annual failure rate assumptions over the platform life.
Thông tin tuân thủ
AEC-Q100 qualification confirmed by Arrow product listing and DigiKey/Mouser categorization as automotive-grade. RoHS, REACH, halogen-free, and conflict-minerals data not present in the provided distributor snippets; verify directly with NXP material declaration if compliance documentation is required for procurement.
