PIC10F206-E/MC - 4MHz 8-Bit Flash MCU | Microchip Technology
MPN: PIC10F206-E/MC ✓ Hoạt độngPIC10F206-E/MC Tóm tắt
An 8-bit microcontroller is a programmable semiconductor that executes firmware to monitor inputs, control outputs, and manage embedded system behavior. Within the device hierarchy, the PIC10F206 belongs to the PIC10 family of small flash-based microcontrollers, combining a CPU core, program Flash, data RAM, I/O ports, configuration memory, and an analog comparator. The PIC10F206 adds comparator functionality to the basic PIC10F200/202/204 architecture, allowing a compact design to perform simple analog threshold measurements without a separate comparator IC.
Key device characteristics include 4 MHz operation, 768 bytes of Flash program memory organized as 512 12-bit words, 24 bytes of RAM, four general-purpose I/O pins, and an analog comparator. The operating voltage range is 2 V to 5.5 V. Its single-cycle instruction execution takes approximately 1 microsecond, while program branches require two cycles. These attributes make the controller suitable for compact products that need modest computation, limited data retention, and deterministic control rather than high-throughput processing.
The fully static RISC architecture allows the processor to stop its clock when the device enters Sleep mode. Configuration memory supports programmable operating options, while Flash program memory permits in-system reprogramming for firmware updates and production configuration. Because the device belongs to the PIC10F200/202/204/206 family, its programming tools and software ecosystem are centered around Microchip's PIC10 architecture and development environment.
Typical applications include appliance control, small sensor interfaces, battery-operated products, LED status indicators, simple motor or relay controllers, and compact embedded-control modules. The four I/O pins are sufficient for basic pushbuttons, discrete sensors, logic-level indicators, and simple actuator interfaces. Its small 2 x 3 mm DFN package also supports space-constrained boards where a larger SOIC or TSSOP package would be inappropriate.
Designers should verify the exposed-pad connection and land pattern against the manufacturer package drawing, preserve the required input, output, and decoupling layout, and account for the device's limited RAM when buffering data. Firmware should also use the device's configuration mechanisms to select the appropriate oscillator, reset behavior, and peripheral settings before normal operation begins.
This page combines the PIC10F206-E/MC architecture, programming references, package details, practical application guidance, and technically relevant drop-in comparison information to support component selection and board-level implementation.
Bộ thay thế dễ dàng lắp đặt cho PIC10F206-E/MC — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC10F206-E/MC (cùng hình factor và footprint) — khác nhau ở Package, I/O Pins, Instruction Set, Operating Temperature, Program Memory.
PIC10F206-I/MC
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC10F206T-I/MC
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC10F206-E/MC Tỷ lệ tối đa & tính chất điện
| Product Type | 8-bit Flash-based CMOS microcontroller |
| CPU Architecture | RISC |
| Instruction Set Count | 33 single-word instructions |
| Tần số xung maksimum | 4 MHz |
| Program Memory | 768 bytes Flash (512 x 12 words) |
| Data Memory | 24 bytes RAM |
| General-Purpose I/O Pins | 4 pins |
| Operating Voltage Range | 2 V to 5.5 V |
| Typical Instruction Cycle Time | 1 microsecond |
| Program Branch Cycle Time | 2 microseconds |
| Peripheral | Analog comparator |
| Architecture | Fully static |
| Program Memory Type | Flash |
| Semiconductor Process | CMOS |
| Hộp | 8-DFN (2 x 3 mm) |
| Trạng thái RoHS | Compliant |
Hướng dẫn cấu hình chân PIC10F206-E/MC 8-dfn (2 x 3 mm)
Cấu hình chân cho PIC10F206-E/MC (8-dfn (2 x 3 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho PIC10F206-E/MC.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PIC10F206-E/MC phù hợp cho 6 Áp dụngs: Compact Sensor Interface, Battery-Operated Control Module, Appliance User Interface, LED and Indicator Control, Simple Relay or Motor Control, Portable Measurement Module.
Compact Sensor Interface
The PIC10F206-E/MC fits compact sensor interfaces because it combines four I/O pins with an on-chip analog comparator in a 2 x 3 mm DFN package. A sensor signal can be evaluated against an internal or external threshold, while the firmware handles switching, filtering, status flags, and actuator commands. Its 768-byte Flash capacity is appropriate for a focused control loop, and 24 bytes of RAM can hold a small state and counter set. The main limitation is memory scale, so designs requiring history buffers, complex digital filtering, or multiple communication protocols should account for the 768-byte program and 24-byte RAM limits.
Được đề xuất
Battery-Operated Control Module
The PIC10F206-E/MC is suitable for a small battery-operated control module that must conserve space while operating from a 2 V to 5.5 V supply. Its fully static architecture supports Sleep operation, and its compact 8-DFN package minimizes PCB area in wearables, portable sensors, and small household products. Four I/O pins are sufficient for a button, status LED, and simple actuator outputs. Firmware can enter Sleep between events to reduce activity, but battery life still depends on the external sensor leakage, pull networks, and regulator quiescent current, which must be evaluated separately from the microcontroller specifications.
Được đề xuất
Appliance User Interface
The PIC10F206-E/MC can implement the local control logic of an appliance user interface when the interface consists of a small number of buttons, indicators, and a simple threshold input. Its 4 MHz processing rate executes control logic rapidly, while the 768 bytes of Flash can store a compact state machine. The four I/O pins limit the number of directly connected front-panel functions, making external expansion necessary for larger key matrices or multiplexed displays. The 2 x 3 mm DFN package also helps when the control PCB must fit behind a small user-interface panel.
Được đề xuất
LED and Indicator Control
The PIC10F206-E/MC is well matched to LED and indicator control because four I/O pins can drive several discrete outputs, directly control simple logic-level driver stages, or operate an indicator pattern. Its 4 MHz execution rate provides responsive sequencing, and Flash memory allows firmware patterns to be updated without replacing the device. The controller is most appropriate for short, deterministic lighting sequences rather than animation-intensive displays. Current limits, polarity, flicker behavior, and grounding should be checked against the manufacturer electrical limits before connecting LEDs directly to an I/O pin.
Được đề xuất
Simple Relay or Motor Control
The PIC10F206-E/MC can supervise a simple relay, latched switch, or low-power motor-control stage when the application requires a compact state machine rather than sophisticated motion algorithms. Four I/O pins can provide control and status signals, while the analog comparator can monitor a feedback or threshold input. The 4 MHz clock supports deterministic timing, and the 2 x 3 mm package leaves board space for the power stage. Flyback protection, driver transistors, current limiting, and isolation from inductive transients remain external design requirements.
Được đề xuất
Portable Measurement Module
The PIC10F206-E/MC fits a portable measurement module that evaluates a modest number of inputs and reports a local result. The analog comparator provides a hardware threshold function, while 24 bytes of RAM can maintain a small working set and 768 bytes of Flash can hold configuration, calibration, and measurement sequencing. The 2 V to 5.5 V operating range permits integration with low-voltage sensor systems. It is best for binary or coarse threshold measurements; applications requiring precision conversion, large sample buffers, or complex digital signal processing need a higher-end microcontroller.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC10F206-E/MC — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC10F206-I/MC | PIC10F206T-I/MC |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 8-DFN (2 x 3 mm) | 8-DFN (2 x 3 mm) | 8-DFN (2 x 3 mm) |
| CPU Architecture | 8-bit RISC | 8-bit RISC | 8-bit RISC |
| Maximum Clock Frequency | 4 MHz | 4 MHz | 4 MHz |
| Program Memory | 768 bytes Flash (512 x 12 words) | 768 bytes Flash (512 x 12 words) | 768 bytes Flash (512 x 12 words) |
| Data Memory | 24 bytes RAM | 24 bytes RAM | 24 bytes RAM |
| General-Purpose I/O Pins | 4 pins | 4 pins | 4 pins |
| Operating Voltage Range | 2 V to 5.5 V | 2 V to 5.5 V | 2 V to 5.5 V |
| Analog Comparator | Yes | Yes | Yes |
| Instruction Set | 33 single-word, single-cycle instructions | 33 single-word, single-cycle instructions | 33 single-word, single-cycle instructions |
Bảo phân biệt quan trọng
- Comparator-equipped PIC10 core in a compact footprint (vsPIC10F206-I/MC)
- Same core resources with an ordering-code configuration (vsPIC10F206T-I/MC)
Ghi chú thiết kế
Use the manufacturer land-pattern drawing for the 8-DFN 2 x 3 mm package and connect the exposed pad exactly as specified. Place the device near its decoupling capacitor, keep the pad path short, and provide adequate solderable area for thermal dissipation. Because the exposed pad is part of the land pattern rather than an optional mechanical feature, do not substitute a generic DFN footprint without cross-checking pad dimensions.
Design the supply path for the stated 2 V to 5.5 V operating range and follow the manufacturer's recommended bypass-capacitor arrangement. Place the primary capacitor adjacent to the supply and ground pins to limit high-frequency supply impedance. Confirm startup, brownout, and maximum voltage behavior against the device's electrical characteristics, particularly when the controller shares a rail with motors, relays, or other switching loads.
Do not exceed the 768-byte Flash or 24-byte RAM limits when estimating firmware requirements, and include the bootloader, configuration values, and interrupt routines in that budget. Four I/O pins also limit direct button, LED, and actuator assignments. Use the programming and configuration tables in the manufacturer datasheet rather than assuming that another PIC10 family's configuration words or pin behavior are identical.
When using the analog comparator, route the relevant signal through a short and electrically quiet path, keep it away from switching-node copper, and connect the exposed-pad ground arrangement as directed by the package drawing. Comparator threshold accuracy can be affected by source impedance, grounding, and nearby noise. Validate the complete analog front end with the intended sensor and operating conditions instead of relying only on nominal timing specifications.
Thông tin tuân thủ
RoHS compliance is identified for the exact MPN. No verified AEC-Q100, REACH, halogen-free, lead-free, or conflict-minerals declaration is available for this ordering configuration.