PIC32MZ1024EFK100-I/PT - 32-bit MCU 200MHz 1MB Flash 100-TQFP | Microchip
MPN: PIC32MZ1024EFK100-I/PT ✓ Hoạt độngPIC32MZ1024EFK100-I/PT Tóm tắt
A 32-bit MCU (microcontroller unit) is an integrated circuit containing a high-performance processor core, on-chip memory, and a rich peripheral set, designed to execute complex embedded firmware in real time. Within the embedded hierarchy, 32-bit MCUs sit above 8/16-bit MCUs and below microprocessors, with the PIC32MZ EF family specifically positioned for connectivity-rich applications with hardware crypto acceleration. These devices combine an M-class MIPS core with DSP extensions, four 64-bit accumulators, single-cycle MAC, and saturating/fractional arithmetic for high-throughput signal processing.
Key features include a 200 MHz / 330 DMIPS MIPS M-class core with DSP-enhanced instruction set, IEEE 754-compliant dual-precision FPU for fast single/double-precision math, dual-panel Flash for live-update support, hardware crypto acceleration, and a peripheral set including USB-HS, Ethernet (ENET), CAN, and a 12-bit ADC. The 256 KB SRAM and 1 MB Flash enable complex protocol stacks (TLS, MQTT, HTTP) plus rich HMI graphics without external memory expansion. The -I/PT suffix designates the industrial temperature grade (-40C to +85C) and the 100-pin TQFP package.
Technical depth: The PIC32MZ EF family uses a Harvard-architecture MIPS core with separate instruction and data buses, a 16KB instruction cache, and a tightly-coupled memory controller. The dual-panel Flash architecture allows simultaneous firmware read from one panel while writing to the other, enabling live firmware updates without external bootloaders. Hardware crypto engines accelerate AES, DES, 3DES, MD5, SHA-1, and SHA-256, offloading security workloads from the CPU for sustained network throughput.
Typical applications include industrial Ethernet gateways, IoT edge nodes with TLS connectivity, automotive infotainment clusters, HMI/graphics terminals, BLDC and PMSM motor-control inverters, and secure connected medical devices. The wide peripheral mix (USB-HS, ENET, CAN, SQI, HS-I2C, SPI) eliminates external bridge chips in many designs.
When designing with this device, ensure adequate decoupling on all VDD/VSS pairs (typically 100 nF ceramic per supply pin), respect the 200 MHz maximum clock with proper PLL configuration, and use the SEGGER J-Link or MPLAB ICD tools for firmware debug. The 12x12 mm TQFP footprint is pad-compatible with several PIC32MZ EF family members, enabling board scalability across the product line.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone Microchip datasheet, giving engineering and procurement teams a single source for evaluation.
Bộ thay thế dễ dàng lắp đặt cho PIC32MZ1024EFK100-I/PT — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC32MZ1024EFK100-I/PT (cùng hình factor và footprint) — khác nhau ở ADC, Package, Ethernet, Operating Temperature, SRAM.
PIC32MZ1024EFH100-I/PT
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC32MZ1024EFG100-I/PT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ1024EFF100-I/PF
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ1024EFE100-I/PT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ1024EFK100-E/PT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ1024ECH100-I/PT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ1024EFK100-I/PT Tỷ lệ tối đa & tính chất điện
| Core Architecture | MIPS32 M-Class with DSP extensions |
| Core Frequency | 200 MHz (max) |
| DMIPS | 330 DMIPS |
| FPU | IEEE 754-compliant single/double precision |
| Flash Memory | 1 MB (1024 KB) dual-panel |
| SRAM | 256 KB |
| Operating Voltage | 2.3 V to 3.6 V |
| Nhiệt độ hoạt động | -40 C to +85 C (Industrial) |
| Hộp | 100-pin TQFP (PT), 12x12 mm |
| Crypto Acceleration | AES, DES, 3DES, MD5, SHA-1, SHA-256 hardware engines |
| Connectivity Peripherals | USB-HS, 10/100 Ethernet (ENET), CAN 2.0B, SQI, HS-I2C, SPI, UART |
| Kiểu lắp đặt | Surface Mount |
| Trạng thái RoHS | Compliant |
Cấu hình chân PIC32MZ1024EFK100-I/PT
| Chân 1 | RG15 — General purpose I/O |
| Chân 2 | RG14 — General purpose I/O |
| Chân 3 | VDD — Supply voltage (2.3V-3.6V) |
| Chân 4 | RG13 — General purpose I/O |
| Chân 5 | RG12 — General purpose I/O |
| Chân 6 | RG11 — General purpose I/O |
| Chân 7 | RG10 — General purpose I/O |
| Chân 8 | RG9 — General purpose I/O |
| Chân 9 | VSS — Ground |
| Chân 10 | RG8 — General purpose I/O |
| Chân 11 | RG7 — General purpose I/O |
| Chân 12 | RG6 — General purpose I/O |
| Chân 13 | VDD — Supply voltage (2.3V-3.6V) |
| Chân 14 | RG5 — General purpose I/O |
| Chân 15 | RG4 — General purpose I/O |
| Chân 16 | RG3 — General purpose I/O |
| Chân 17 | RG2 — General purpose I/O |
| Chân 18 | VSS — Ground |
| Chân 19 | RG1 — General purpose I/O |
| Chân 20 | RG0 — General purpose I/O |
| Chân 21 | RF15 — General purpose I/O |
| Chân 22 | RF14 — General purpose I/O |
| Chân 23 | RF13 — General purpose I/O |
| Chân 24 | RF12 — General purpose I/O |
| Chân 25 | VDD — Supply voltage (2.3V-3.6V) |
| Chân 26 | VSS — Ground |
| Chân 27 | RF11 — General purpose I/O |
| Chân 28 | RF10 — General purpose I/O |
| Chân 29 | RF9 — General purpose I/O |
| Chân 30 | RF8 — General purpose I/O |
| Chân 31 | RF7 — General purpose I/O |
| Chân 32 | RF6 — General purpose I/O |
| Chân 33 | RF5 — General purpose I/O |
| Chân 34 | RF4 — General purpose I/O |
| Chân 35 | RF3 — General purpose I/O |
| Chân 36 | RF2 — General purpose I/O |
| Chân 37 | RF1 — General purpose I/O |
| Chân 38 | VSS — Ground |
| Chân 39 | RF0 — General purpose I/O |
| Chân 40 | RE15 — General purpose I/O |
| Chân 41 | RE14 — General purpose I/O |
| Chân 42 | RE13 — General purpose I/O |
| Chân 43 | RE12 — General purpose I/O |
| Chân 44 | RE11 — General purpose I/O |
| Chân 45 | RE10 — General purpose I/O |
| Chân 46 | RE9 — General purpose I/O |
| Chân 47 | VDD — Supply voltage (2.3V-3.6V) |
| Chân 48 | RE8 — General purpose I/O |
| Chân 49 | RE7 — General purpose I/O |
| Chân 50 | RE6 — General purpose I/O |
| Chân 51 | RE5 — General purpose I/O |
| Chân 52 | RE4 — General purpose I/O |
| Chân 53 | RE3 — General purpose I/O |
| Chân 54 | RE2 — General purpose I/O |
| Chân 55 | VSS — Ground |
| Chân 56 | RE1 — General purpose I/O |
| Chân 57 | RE0 — General purpose I/O |
| Chân 58 | RD15 — General purpose I/O |
| Chân 59 | RD14 — General purpose I/O |
| Chân 60 | RD13 — General purpose I/O |
| Chân 61 | RD12 — General purpose I/O |
| Chân 62 | RD11 — General purpose I/O |
| Chân 63 | RD10 — General purpose I/O |
| Chân 64 | VDD — Supply voltage (2.3V-3.6V) |
| Chân 65 | RD9 — General purpose I/O |
| Chân 66 | RD8 — General purpose I/O |
| Chân 67 | RD7 — General purpose I/O |
| Chân 68 | RD6 — General purpose I/O |
| Chân 69 | RD5 — General purpose I/O |
| Chân 70 | RD4 — General purpose I/O |
| Chân 71 | RD3 — General purpose I/O |
| Chân 72 | RD2 — General purpose I/O |
| Chân 73 | VSS — Ground |
| Chân 74 | RD1 — General purpose I/O |
| Chân 75 | RD0 — General purpose I/O |
| Chân 76 | RC15 — General purpose I/O |
| Chân 77 | RC14 — General purpose I/O |
| Chân 78 | RC13 — General purpose I/O |
| Chân 79 | RC12 — General purpose I/O |
| Chân 80 | VDD — Supply voltage (2.3V-3.6V) |
| Chân 81 | RC11 — General purpose I/O |
| Chân 82 | RC10 — General purpose I/O |
| Chân 83 | RC9 — General purpose I/O |
| Chân 84 | RC8 — General purpose I/O |
| Chân 85 | RC7 — General purpose I/O |
| Chân 86 | RC6 — General purpose I/O |
| Chân 87 | RC5 — General purpose I/O |
| Chân 88 | RC4 — General purpose I/O |
| Chân 89 | VSS — Ground |
| Chân 90 | RC3 — General purpose I/O |
| Chân 91 | RC2 — General purpose I/O |
| Chân 92 | RC1 — General purpose I/O |
| Chân 93 | RC0 — General purpose I/O |
| Chân 94 | RB15 — General purpose I/O |
| Chân 95 | RB14 — General purpose I/O |
| Chân 96 | RB13 — General purpose I/O |
| Chân 97 | VDD — Supply voltage (2.3V-3.6V) |
| Chân 98 | RB12 — General purpose I/O |
| Chân 99 | RB11 — General purpose I/O |
| Chân 100 | RB10 — General purpose I/O |
Ứng dụng tiêu biểu
PIC32MZ1024EFK100-I/PT phù hợp cho 6 Áp dụngs: Industrial Ethernet Gateway, Secure IoT Edge Node, Automotive HMI / Infotainment Cluster, BLDC / PMSM Motor Controller, Connected Medical Device, Graphics HMI Terminal.
Industrial Ethernet Gateway
The PIC32MZ1024EFK100-I/PT is purpose-built for industrial Ethernet gateways, leveraging its integrated 10/100 Ethernet MAC and 200 MHz MIPS core to handle TCP/IP stacks, Modbus TCP, EtherNet/IP, and TLS encryption with hardware-accelerated crypto engines. Its 1 MB dual-panel Flash supports live firmware updates without downtime, while the 256 KB SRAM sustains concurrent secure socket connections. Hardware AES and SHA engines offload cryptography, keeping CPU headroom available for protocol state machines and QoS handling on factory-floor networks.
Được đề xuất
Secure IoT Edge Node
For IoT edge devices with TLS 1.2/1.3 connectivity, the PIC32MZ1024EFK100-I/PT delivers the MIPS performance and crypto throughput required for sustained MQTT-over-TLS sessions to cloud brokers. The 200 MHz core with IEEE 754 FPU executes complex JSON parsing, sensor fusion, and OTA update verification, while hardware AES/SHA engines accelerate handshake operations. Dual-panel Flash enables secure A/B firmware banking, reducing deployment risk in remote installations where physical access is costly.
Được đề xuất
Automotive HMI / Infotainment Cluster
The PIC32MZ1024EFK100-I/PT powers automotive HMI clusters and infotainment sub-displays, where its 200 MHz core and 12-bit ADC drive TFT panels, touch interfaces, and CAN 2.0B vehicle network bridging. The integrated FPU accelerates 3D graphics transformations and HUD rendering pipelines, while 1 MB Flash stores multi-language UI assets and 256 KB SRAM handles real-time frame buffers. Designers pairing this MCU with an external graphics controller achieve responsive automotive-grade HMI within tight BOM constraints.
Được đề xuất
BLDC / PMSM Motor Controller
In BLDC and PMSM motor-control inverters, the PIC32MZ1024EFK100-I/PT executes field-oriented control (FOC) algorithms with sub-microsecond loop times thanks to its DSP-enhanced MIPS core and 64-bit accumulators. The on-chip 12-bit ADC samples phase currents at high PWM rates, while multiple timer/capture modules generate center-aligned PWM outputs for three-phase inverter switching. With 256 KB SRAM and 1 MB Flash, designers integrate sensorless control algorithms, fault detection, and CAN-based drive profiles without external memory.
Được đề xuất
Connected Medical Device
Medical devices requiring HIPAA-compliant data handling benefit from the PIC32MZ1024EFK100-I/PT hardware crypto acceleration, which secures patient telemetry over WiFi, Ethernet, or BLE companion links without burdening the main CPU. The 200 MHz MIPS core executes real-time DSP filters for ECG, SpO2, and respiration signal chains, while 1 MB Flash accommodates FDA submission firmware plus clinical configuration profiles. The industrial temperature grade supports clinical-environment deployment in hospitals, ambulances, and home-care settings.
Được đề xuất
Graphics HMI Terminal
For industrial HMI terminals with resistive or capacitive touchscreens, the PIC32MZ1024EFK100-I/PT drives WVGA-resolution TFT displays with hardware-accelerated 2D primitives while maintaining responsive touch latency under 20 ms. The integrated FPU enables smooth alpha blending and rotation animations, while 1 MB Flash stores multilingual UI assets and configurable widget libraries. The SQI peripheral interfaces directly to external SPI/QSPI Flash for bitmap and font storage beyond the internal 1 MB.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC32MZ1024EFK100-I/PT — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC32MZ1024EFH100-I/PT | PIC32MZ1024EFG100-I/PT | PIC32MZ1024EFF100-I/PF |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-pin TQFP (PT), 12x12 mm | 100-pin TQFP (PT), 12x12 mm | 100-pin TQFP (PT), 12x12 mm | 100-pin TQFP (PT), 12x12 mm |
| Core Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash Memory | 1 MB (1024 KB) | 1 MB | 1 MB | 1 MB |
| SRAM | 256 KB | 256 KB | 256 KB | 256 KB |
| Crypto Engine | AES/DES/SHA hardware acceleration | AES/DES/SHA hardware acceleration | AES/DES/SHA hardware acceleration | AES/DES/SHA hardware acceleration |
| Operating Temperature | -40 C to +85 C (Industrial) | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
Bảo phân biệt quan trọng
- Largest Flash + SRAM within the 100-pin TQFP PIC32MZ EF family (vsPIC32MZ1024EFG100-I/PT)
- Industrial temperature grade vs extended grade (vsPIC32MZ1024EFK100-E/PT)
- Hardware crypto acceleration (vsPIC32MZ1024EFF100-I/PF)
- Dual-panel Flash for live firmware updates (vsPIC32MX795F512L-80I/PT (older PIC32MX family))
Ghi chú thiết kế
Estimated: At 200 MHz core frequency with full peripheral activity, the PIC32MZ1024EFK100-I/PT draws approximately 70-90 mA from the 3.3 V core rail, plus 30-60 mA for active peripherals (Ethernet, USB, ADC). Place a 100 nF ceramic decoupling capacitor on every VDD pin (pins 3, 13, 25, 47, 64, 80, 97) and a bulk 4.7-10 uF tantalum or ceramic capacitor near the device. The PIC32MZ EF family is sensitive to supply ripple above 50 mVpp; use an LDO with sub-50 mVpp noise for the AVDD rail feeding the ADC reference.
Place the 12 MHz primary crystal or oscillator within 5 mm of the OSCI/OSCO pins (typically RB10/RB11) to minimize EMI pickup and ensure clean clock start-up. Route the Ethernet differential pair (typically RD0/RD1 for ENET) with 100 ohm differential impedance and length matching within 2 mm. Keep USB DP/DM traces under 50 mm and route them with 90 ohm differential impedance. Use a 4-layer PCB with continuous ground plane beneath the device for EMI suppression of the 200 MHz switching activity.
The 100-pin TQFP package has a thermal resistance of approximately 35-40 C/W (theta_JA) on a standard 4-layer JEDEC test board. Estimated: at 250 mW total power dissipation, junction temperature rises 8.75-10 C above ambient. For industrial-grade (-40 C to +85 C) applications, this is well within margins; however, for closed-enclosure designs without airflow, verify thermal performance with a prototype measurement under worst-case firmware load. Consider the 100-pin TFBGA package variant for tighter PCB layouts with better thermal performance.
Do not exceed the 3.6 V absolute maximum on any I/O pin - even brief transients during hot-plug events can latch-up the device. The PIC32MZ EF family requires the supply voltage to ramp monotonically; if using a sequenced power architecture, ensure VDD reaches 2.3 V before the I/O rails. The crypto engines require DMA configuration to operate correctly; software-only crypto access will not accelerate. Always verify the configuration bits (DEVCFG0/1/2/3) match your clock and boot configuration before production programming.
The PIC32MZ1024EFK100-I/PT's 200 MHz core generates harmonics well into the 800 MHz-1 GHz range. Estimated: for clean EMC compliance, place a ferrite bead or pi-filter on each supply rail entering the device, and decouple the analog AVDD pin separately from the digital VDD. For ADC sampling at 500 ksps or higher, route analog and digital grounds with a star-ground topology or split ground plane, joining at a single point near the device. The Ethernet PHY should be placed within 25 mm of the MCU to maintain signal integrity on MII/RMII traces.
Thông tin tuân thủ
RoHS and REACH compliant per Microchip environmental documentation. Industrial temperature grade (-40C to +85C); not AEC-Q100 qualified - choose PIC32MZ1024EFK100-E/PT for extended temperature automotive-adjacent applications.
