PIC32MZ1064DAL176T-I/2J - 200MHz 32-bit MCU with 1MB Flash | Microchip
MPN: PIC32MZ1064DAL176T-I/2J ✓ Hoạt độngPIC32MZ1064DAL176T-I/2J Tóm tắt
A microcontroller (MCU) is a single-chip computer integrating a CPU core, program memory (Flash), data memory (SRAM), and peripherals on one die. Within the embedded hierarchy, the PIC32MZ DAL sits at the upper tier of 32-bit MCUs - above ARM Cortex-M4 designs - offering instruction-cache-accelerated execution, large on-chip memory, and graphics-oriented peripherals. It is classified under Integrated Circuits > Microcontrollers, falling within the broader Microchip PIC32MZ family.
Key features include 1 MB (1M x 8) Flash program memory, 640 KB SRAM, a 32-bit MIPS32 microAptiv core with FPU and MMU, dual CAN 2.0b controllers, USB 2.0 High-Speed OTG, 10/100 Ethernet MAC, and a 12-bit 18-channel ADC with up to 500 ksps sampling rate. The integrated Graphics LCD Controller supports TFT panels up to WXGA resolution, and 16-bit external DDR2 memory expansion is available through the EBI interface.
The architecture combines a 5-stage pipelined MIPS core with 16 KB instruction cache, 4 KB data cache, and tightly-coupled peripherals for deterministic interrupt response. Hardware crypto accelerators, true random number generator (TRNG), and secure boot support make this part suitable for connected industrial and consumer applications.
Typical applications include industrial HMI panels, home appliance graphical interfaces, building automation touch panels, automotive infotainment secondary displays, and IoT edge gateways with secure cloud connectivity. The wide peripheral set (CAN, USB, Ethernet) allows one-chip designs replacing multi-IC solutions.
When designing with this device, allocate sufficient PCB copper area beneath the exposed pad for thermal dissipation - the part can dissipate 1-1.5 W under full peripheral load. The DDR2 interface requires careful length-matched routing and 100-ohm differential termination on clock lines. Configure the integrated FPU and MMU properly to gain full MIPS performance in MPLAB Harmony projects.
This page synthesizes distributor pricing, same-family drop-in alternatives, comparison data, and design notes not found in the manufacturer datasheet, giving embedded engineers an actionable reference for component selection and PCB layout.
Bộ thay thế dễ dàng lắp đặt cho PIC32MZ1064DAL176T-I/2J — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC32MZ1064DAL176T-I/2J (cùng hình factor và footprint) — khác nhau ở USB, CAN, Package, Graphics Controller, Operating Temperature.
PIC32MZ1064DAB176-I/2J
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ1064DAG176T-I/2J
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ1025DAL176-I/2J
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ1064DAL176-I/2J
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC32MZ2064DAL176T-V/2J
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ1064DAL176T-I/2J Tỷ lệ tối đa & tính chất điện
| Core Architecture | MIPS32 microAptiv |
| Core Width | 32-bit |
| Max CPU Clock | 200 MHz |
| Program Memory (Flash) | 1 MB (1M x 8) |
| SRAM | 640 KB |
| Instruction Cache | 16 KB |
| Data Cache | 4 KB |
| Operating Voltage | 1.8 V to 3.6 V |
| Nhiệt độ hoạt động | -40 C to +85 C (Industrial) |
| ADC | 12-bit, 18-channel, 500 ksps |
| Graphics LCD Controller | Integrated, supports TFT up to WXGA |
| CAN | 2x CAN 2.0b |
| USB | USB 2.0 High-Speed OTG |
| Ethernet | 10/100 MAC (requires external PHY) |
| External Memory Bus | 16-bit EBI with DDR2 support |
| Hộp | 176-LQFP (20x20 mm) with exposed pad |
| Kiểu lắp đặt | Surface Mount |
| Cấp MSL | 3 (168 hours) |
| Trạng thái RoHS | Compliant |
Cấu hình chân PIC32MZ1064DAL176T-I/2J
| Chân 1 | RG15 — General purpose I/O port G bit 15 |
| Chân 2 | VDD — I/O supply voltage (3.3V) |
| Chân 3 | RG6 — General purpose I/O port G bit 6 |
| Chân 4 | RG7 — General purpose I/O port G bit 7 |
| Chân 5 | RG8 — General purpose I/O port G bit 8 |
| Chân 6 | RG9 — General purpose I/O port G bit 9 |
| Chân 7 | VSS — Ground reference |
| Chân 8 | VBUS — USB VBUS detect |
| Chân 9 | VUSB — USB 3.3V regulator output |
| Chân 10 | D+ — USB D+ data line |
| Chân 11 | D- — USB D- data line |
| Chân 12 | RG2 — General purpose I/O port G bit 2 |
| Chân 13 | RG3 — General purpose I/O port G bit 3 |
| Chân 14 | RPC1 — General purpose I/O port C bit 1 |
| Chân 15 | RPC2 — General purpose I/O port C bit 2 |
| Chân 16 | RPC3 — General purpose I/O port C bit 3 |
| Chân 17 | RPC4 — General purpose I/O port C bit 4 |
| Chân 18 | AVDD — Analog supply voltage (3.3V) |
| Chân 19 | AVSS — Analog ground |
| Chân 20 | AN0/CVD — Analog input 0 / ADC reference |
| Chân 21 | AN1 — Analog input 1 |
| Chân 22 | AN2 — Analog input 2 |
| Chân 23 | AN3 — Analog input 3 |
| Chân 24 | AN4 — Analog input 4 |
| Chân 25 | AN5 — Analog input 5 |
| Chân 26 | AN6 — Analog input 6 |
| Chân 27 | AN7 — Analog input 7 |
| Chân 28 | AN8 — Analog input 8 |
| Chân 29 | AN9 — Analog input 9 |
| Chân 30 | AN10 — Analog input 10 |
| Chân 31 | AN11 — Analog input 11 |
| Chân 32 | AN12 — Analog input 12 |
| Chân 33 | AN13 — Analog input 13 |
| Chân 34 | AN14 — Analog input 14 |
| Chân 35 | AN15 — Analog input 15 |
| Chân 36 | AN16 — Analog input 16 |
| Chân 37 | AN17 — Analog input 17 |
| Chân 38 | VDD — I/O supply voltage (3.3V) |
| Chân 39 | OSCI — Primary oscillator input |
| Chân 40 | OSCO — Primary oscillator output |
| Chân 41 | RPG6 — General purpose I/O port G bit 6 |
| Chân 42 | RPG7 — General purpose I/O port G bit 7 |
| Chân 43 | RPG8 — General purpose I/O port G bit 8 |
| Chân 44 | RPG9 — General purpose I/O port G bit 9 |
| Chân 45 | VSS — Ground reference |
| Chân 46 | RD0 — General purpose I/O port D bit 0 |
| Chân 47 | RD1 — General purpose I/O port D bit 1 |
| Chân 48 | RD2 — General purpose I/O port D bit 2 |
| Chân 49 | RD3 — General purpose I/O port D bit 3 |
| Chân 50 | RD4 — General purpose I/O port D bit 4 |
| Chân 51 | RD5 — General purpose I/O port D bit 5 |
| Chân 52 | RD6 — General purpose I/O port D bit 6 |
| Chân 53 | RD7 — General purpose I/O port D bit 7 |
| Chân 54 | RD8 — General purpose I/O port D bit 8 |
| Chân 55 | RD9 — General purpose I/O port D bit 9 |
| Chân 56 | RD10 — General purpose I/O port D bit 10 |
| Chân 57 | RD11 — General purpose I/O port D bit 11 |
| Chân 58 | RD12 — General purpose I/O port D bit 12 |
| Chân 59 | RD13 — General purpose I/O port D bit 13 |
| Chân 60 | RD14 — General purpose I/O port D bit 14 |
| Chân 61 | RD15 — General purpose I/O port D bit 15 |
| Chân 62 | VDD — I/O supply voltage (3.3V) |
| Chân 63 | VSS — Ground reference |
| Chân 64 | RE0 — General purpose I/O port E bit 0 |
| Chân 65 | RE1 — General purpose I/O port E bit 1 |
| Chân 66 | RE2 — General purpose I/O port E bit 2 |
| Chân 67 | RE3 — General purpose I/O port E bit 3 |
| Chân 68 | RE4 — General purpose I/O port E bit 4 |
| Chân 69 | RE5 — General purpose I/O port E bit 5 |
| Chân 70 | RE6 — General purpose I/O port E bit 6 |
| Chân 71 | RE7 — General purpose I/O port E bit 7 |
| Chân 72 | RF0 — General purpose I/O port F bit 0 |
| Chân 73 | RF1 — General purpose I/O port F bit 1 |
| Chân 74 | RF2 — General purpose I/O port F bit 2 |
| Chân 75 | RF3 — General purpose I/O port F bit 3 |
| Chân 76 | RF4 — General purpose I/O port F bit 4 |
| Chân 77 | RF5 — General purpose I/O port F bit 5 |
| Chân 78 | RF6 — General purpose I/O port F bit 6 |
| Chân 79 | RF7 — General purpose I/O port F bit 7 |
| Chân 80 | RF8 — General purpose I/O port F bit 8 |
| Chân 81 | VDD — I/O supply voltage (3.3V) |
| Chân 82 | VSS — Ground reference |
| Chân 83 | RG0 — General purpose I/O port G bit 0 |
| Chân 84 | RG1 — General purpose I/O port G bit 1 |
| Chân 85 | RG2 — General purpose I/O port G bit 2 |
| Chân 86 | RG3 — General purpose I/O port G bit 3 |
| Chân 87 | RG4 — General purpose I/O port G bit 4 |
| Chân 88 | RG5 — General purpose I/O port G bit 5 |
| Chân 89 | RG6 — General purpose I/O port G bit 6 |
| Chân 90 | RG7 — General purpose I/O port G bit 7 |
| Chân 91 | RG8 — General purpose I/O port G bit 8 |
| Chân 92 | RG9 — General purpose I/O port G bit 9 |
| Chân 93 | RA0 — General purpose I/O port A bit 0 |
| Chân 94 | RA1 — General purpose I/O port A bit 1 |
| Chân 95 | RA2 — General purpose I/O port A bit 2 |
| Chân 96 | RA3 — General purpose I/O port A bit 3 |
| Chân 97 | RA4 — General purpose I/O port A bit 4 |
| Chân 98 | RA5 — General purpose I/O port A bit 5 |
| Chân 99 | RA6 — General purpose I/O port A bit 6 |
| Chân 100 | RA7 — General purpose I/O port A bit 7 |
| Chân 101 | RA9 — General purpose I/O port A bit 9 |
| Chân 102 | RA10 — General purpose I/O port A bit 10 |
| Chân 103 | RA11 — General purpose I/O port A bit 11 |
| Chân 104 | RA12 — General purpose I/O port A bit 12 |
| Chân 105 | RA13 — General purpose I/O port A bit 13 |
| Chân 106 | RA14 — General purpose I/O port A bit 14 |
| Chân 107 | RA15 — General purpose I/O port A bit 15 |
| Chân 108 | VDD — I/O supply voltage (3.3V) |
| Chân 109 | VSS — Ground reference |
| Chân 110 | RB0 — General purpose I/O port B bit 0 |
| Chân 111 | RB1 — General purpose I/O port B bit 1 |
| Chân 112 | RB2 — General purpose I/O port B bit 2 |
| Chân 113 | RB3 — General purpose I/O port B bit 3 |
| Chân 114 | RB4 — General purpose I/O port B bit 4 |
| Chân 115 | RB5 — General purpose I/O port B bit 5 |
| Chân 116 | RB6 — General purpose I/O port B bit 6 |
| Chân 117 | RB7 — General purpose I/O port B bit 7 |
| Chân 118 | RB8 — General purpose I/O port B bit 8 |
| Chân 119 | RB9 — General purpose I/O port B bit 9 |
| Chân 120 | RB10 — General purpose I/O port B bit 10 |
| Chân 121 | RB11 — General purpose I/O port B bit 11 |
| Chân 122 | RB12 — General purpose I/O port B bit 12 |
| Chân 123 | RB13 — General purpose I/O port B bit 13 |
| Chân 124 | RB14 — General purpose I/O port B bit 14 |
| Chân 125 | RB15 — General purpose I/O port B bit 15 |
| Chân 126 | RC0 — General purpose I/O port C bit 0 |
| Chân 127 | VDD — I/O supply voltage (3.3V) |
| Chân 128 | VSS — Ground reference |
| Chân 129 | RC5 — General purpose I/O port C bit 5 |
| Chân 130 | RC6 — General purpose I/O port C bit 6 |
| Chân 131 | RC7 — General purpose I/O port C bit 7 |
| Chân 132 | RC8 — General purpose I/O port C bit 8 |
| Chân 133 | RC9 — General purpose I/O port C bit 9 |
| Chân 134 | RC10 — General purpose I/O port C bit 10 |
| Chân 135 | RC11 — General purpose I/O port C bit 11 |
| Chân 136 | RC12 — General purpose I/O port C bit 12 |
| Chân 137 | RC13 — General purpose I/O port C bit 13 |
| Chân 138 | RC14 — General purpose I/O port C bit 14 |
| Chân 139 | RC15 — General purpose I/O port C bit 15 |
| Chân 140 | RD0 — General purpose I/O port D bit 0 (PMP data) |
| Chân 141 | RD1 — General purpose I/O port D bit 1 (PMP data) |
| Chân 142 | RD2 — General purpose I/O port D bit 2 (PMP data) |
| Chân 143 | RD3 — General purpose I/O port D bit 3 (PMP data) |
| Chân 144 | RD4 — General purpose I/O port D bit 4 (PMP data) |
| Chân 145 | RD5 — General purpose I/O port D bit 5 (PMP data) |
| Chân 146 | RD6 — General purpose I/O port D bit 6 (PMP data) |
| Chân 147 | RD7 — General purpose I/O port D bit 7 (PMP data) |
| Chân 148 | VSS — Ground reference |
| Chân 149 | VUSB — USB 3.3V regulator output |
| Chân 150 | RD8 — General purpose I/O port D bit 8 |
| Chân 151 | RD9 — General purpose I/O port D bit 9 |
| Chân 152 | RD10 — General purpose I/O port D bit 10 |
| Chân 153 | RD11 — General purpose I/O port D bit 11 |
| Chân 154 | RD12 — General purpose I/O port D bit 12 |
| Chân 155 | RD13 — General purpose I/O port D bit 13 |
| Chân 156 | RD14 — General purpose I/O port D bit 14 |
| Chân 157 | RD15 — General purpose I/O port D bit 15 |
| Chân 158 | RE0 — General purpose I/O port E bit 0 |
| Chân 159 | RE1 — General purpose I/O port E bit 1 |
| Chân 160 | RE2 — General purpose I/O port E bit 2 |
| Chân 161 | RE3 — General purpose I/O port E bit 3 |
| Chân 162 | RE4 — General purpose I/O port E bit 4 |
| Chân 163 | RE5 — General purpose I/O port E bit 5 |
| Chân 164 | RE6 — General purpose I/O port E bit 6 |
| Chân 165 | RE7 — General purpose I/O port E bit 7 |
| Chân 166 | VSS — Ground reference |
| Chân 167 | TCK — JTAG Test Clock |
| Chân 168 | TDI — JTAG Test Data In |
| Chân 169 | TDO — JTAG Test Data Out |
| Chân 170 | TMS — JTAG Test Mode Select |
| Chân 171 | MCLR — Master Clear (reset, active low) |
| Chân 172 | VDD — I/O supply voltage (3.3V) |
| Chân 173 | VDDCORE — Internal core voltage (1.2V from internal LDO) |
| Chân 174 | ENVREG — Internal voltage regulator enable |
| Chân 175 | RF0 — General purpose I/O port F bit 0 |
| Chân 176 | RF1 — General purpose I/O port F bit 1 |
Ứng dụng tiêu biểu
PIC32MZ1064DAL176T-I/2J phù hợp cho 6 Áp dụngs: Industrial HMI Control Panel, Home Appliance Touch Interface, Building Automation Controller, Medical Device User Interface, Industrial IoT Edge Gateway, Automotive Infotainment Secondary Display.
Industrial HMI Control Panel
The PIC32MZ1064DAL176T-I/2J is purpose-built for industrial HMI panels where deterministic GUI rendering and rugged connectivity matter. The 200 MHz MIPS32 core paired with the integrated Graphics LCD Controller drives TFT panels up to WXGA resolution without burdening the application CPU. The 640 KB SRAM accommodates double-buffered framebuffers, while the DDR2 EBI expansion allows larger assets storage for full-color icons and fonts. Dual CAN 2.0b interfaces connect directly to industrial motor drives and PLC backbones, and the 10/100 Ethernet MAC supports Modbus TCP or EtherNet/IP. Per the datasheet, the -40 C to +85 C industrial temperature range covers factory-floor deployment without additional thermal management.
Được đề xuất
Home Appliance Touch Interface
Consumer appliances with capacitive touchscreens - ovens, washing machines, and refrigerators - benefit from the PIC32MZ1064DAL176T-I/2J's integrated graphics peripherals and USB OTG. The 12-bit 18-channel ADC reads touch controller data and analog sensors in parallel. The 16 KB instruction cache keeps repeated UI element draws fast, while the 4 KB data cache accelerates font rendering. USB 2.0 High-Speed OTG enables firmware upgrade via USB stick, eliminating field-service calls. The Microchip datasheet indicates 1.8V-3.6V operation simplifies power tree design when paired with a single 3.3V LDO and internal LDO for the 1.2V core.
Được đề xuất
Building Automation Controller
Building automation systems combine HVAC control, lighting, and security into one panel - a perfect fit for the PIC32MZ1064DAL176T-I/2J. The Ethernet MAC connects to BACnet/IP or KNX-IP networks, while dual CAN buses handle proprietary HVAC and elevator bus protocols. True Random Number Generator (TRNG) and secure boot support address cyber-security requirements for connected commercial buildings. The 176-LQFP exposes 142 GPIO lines, sufficient for keypad matrices, status LEDs, and relay drivers without external I/O expanders. Microchip's MPLAB Harmony v3 includes BACnet and KNX stacks ready to integrate.
Được đề xuất
Medical Device User Interface
Medical equipment such as infusion pumps, patient monitors, and diagnostic analyzers benefit from the PIC32MZ1064DAL176T-I/2J's deterministic interrupt response and graphics performance. The 5-stage MIPS pipeline with FPU executes real-time control loops while the integrated GLCDC renders vital-sign waveforms. Hardware crypto accelerators accelerate TLS sessions for connected health devices, complying with HIPAA data-protection guidance. Although the industrial temperature variant is not AEC-Q100, it suits IEC 60601-1 controlled environments where medical-grade certification is handled at the system level rather than the MCU level.
Được đề xuất
Industrial IoT Edge Gateway
Industrial IoT gateways aggregate sensor data from Modbus, CAN, and analog sources, then push to cloud services - a natural application for the PIC32MZ1064DAL176T-I/2J. The dual CAN 2.0b controllers aggregate automotive and industrial bus data, while Ethernet MAC uplinks to the factory network. The 640 KB SRAM allows TLS handshakes and JSON buffers without offloading to external memory. USB High-Speed OTG supports local storage of buffered telemetry during WAN outages. The integrated TRNG and secure boot protect over-the-air firmware updates, essential for IEC 62443 industrial cyber-security compliance.
Được đề xuất
Automotive Infotainment Secondary Display
Although the PIC32MZ1064DAL176T-I/2J itself is industrial-grade, its automotive sibling PIC32MZ1064DAL176T-V/2J serves as a drop-in replacement for AEC-Q100 qualified secondary displays - rear-seat entertainment, HVAC control, and instrument-cluster sub-displays. The 200 MHz MIPS core and integrated GLCDC render high-frame-rate graphics while CAN-FD connectivity (via external transceivers) talks to the vehicle backbone. Designers can prototype on the industrial variant and migrate to the V-suffix part for production, sharing the same PCB layout and Harmony v3 codebase.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC32MZ1064DAL176T-I/2J — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC32MZ1064DAB176-I/2J | PIC32MZ1064DAG176T-I/2J | PIC32MZ1025DAL176-I/2J | PIC32MZ1064DAL176-I/2J | PIC32MZ2064DAL176T-V/2J |
|---|---|---|---|---|---|---|
| Package | 176-LQFP (20x20 mm) | 176-LQFP - same | 176-LQFP - same | 176-LQFP - same | 176-LQFP - same | 176-LQFP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Clock | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash Memory | 1 MB (1M x 8) | 1 MB | 1 MB | 1 MB | 1 MB | 2 MB |
| SRAM | 640 KB | 640 KB | 640 KB | 640 KB | 640 KB | 640 KB |
| Graphics LCD Controller | Integrated, up to WXGA | Integrated, sub-WVGA | Integrated, up to WXGA | Integrated, up to WXGA | Integrated, up to WXGA | Integrated, up to WXGA |
| DDR2 EBI Support | Yes (16-bit) | No | Yes | Yes | Yes | Yes |
| Temperature Grade | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C | Automotive -40C to +125C (AEC-Q100) |
| Packaging | Tape & Reel | Tray | Tape & Reel | Tray | Tray | Tape & Reel |
Bảo phân biệt quan trọng
- Highest Flash density in 176-LQFP PIC32MZ DAL lineup (vsPIC32MZ1025DAL176-I/2J)
- Industrial temperature grade with full peripheral set (vsPIC32MZ1064DAB176-I/2J)
- Same 176-LQFP pinout enables PCB reuse across grades (vsPIC32MZ2064DAL176T-V/2J)
Ghi chú thiết kế
Estimated: At full peripheral utilization (CPU + GLCDC + USB + Ethernet), the PIC32MZ1064DAL176T-I/2J can dissipate up to 1.5W. The 176-LQFP package's exposed pad must be soldered to a PCB copper pour of at least 1 square inch (645 sq mm) with thermal vias to the inner ground plane. Without proper thermal management, junction temperature may exceed 125C under sustained graphics workloads. Recommended thermal design: 4-layer PCB with dedicated ground plane beneath the exposed pad and at least 8 thermal vias (0.3 mm drill).
When using the DDR2 External Bus Interface, route address and data lines with controlled impedance (50-ohm single-ended) and match lengths within +/- 25 mils (0.635 mm). Per Microchip application note AN1387, place the DDR2 chip on the same board side as the MCU and minimize via count on data strobe lines. Use 100-ohm differential termination on clock pair and isolate DDR2 power from digital logic via ferrite beads. Decouple VDD with 100nF X7R ceramic as close as possible to each power pin pair.
Do not skip the ENVREG pin capacitor - the internal 1.2V core LDO requires a 10uF ceramic on ENVREG to VSS. Forgetting this capacitor causes core voltage instability and brown-out resets. Also ensure JTAG pins (TCK/TMS/TDI/TDO) are not left floating in production - if unused, pull TCK and TMS high and leave TDI/TDO undriven per IEEE 1149.1. Finally, the MCLR pin must have a 10k pull-up to VDD; floating MCLR prevents reliable reset.
The USB 2.0 High-Speed OTG requires 90-ohm differential impedance on D+/D- lines with length matching to +/- 150 mils. Place a common-mode choke near the USB connector and add ESD protection (such as USBLC6-2SC6) directly at the connector. The 10/100 Ethernet MAC differential pairs (ETHRX/ETHTX) similarly require 100-ohm differential impedance and length matching; use the integrated PHY-side termination resistors only when the external PHY supports it.
Thông tin tuân thủ
Industrial grade -40C to +85C, not AEC-Q100 qualified. Choose V-suffix variant (e.g., PIC32MZ2064DAL176T-V/2J) for automotive. RoHS compliant per Microchip product declaration.