PIC32MZ2025DAB169T-I/HF - 32-bit 200MHz MCU 2MB Flash 169-LFBGA
MPN: PIC32MZ2025DAB169T-I/HF ✓ Hoạt độngPIC32MZ2025DAB169T-I/HF Tóm tắt
A 32-bit MCU is a microcontroller built around a 32-bit data path and 32-bit registers, which lets it process larger operands and addresses in a single instruction than 8-bit or 16-bit parts. The PIC32MZ DA family sits at the top of the PIC32 hierarchy (PIC32 > 32-bit MCU > MIPS32 microAptiv core > PIC32MZ DA sub-family), giving designers an MCU-style programming model with peripherals, RTOS support, and a wide toolchain while delivering 200 MHz / 330 DMIPS-class throughput that overlaps entry-level MPU workloads.
Three headline features differentiate this part: 2 MB Flash with 640 KB SRAM for full LVGL / emWin stacks and asset storage; an integrated 2D Graphics Processor with parallel RGB interface for TFT up to WXGA, removing external GPU cost; and a 12-bit 18 MSPS ADC with up to 45 analog inputs, enabling multi-sensor data acquisition without an external ADC. The 11x11 mm LFBGA-169 footprint keeps board area compact for handhelds and panel-mount HMIs.
Architecturally the device pairs a MIPS32 microAptiv core with a 5-stage pipeline and tightly-coupled peripherals routed through a multi-layer AHB/APB fabric. Designers get deterministic interrupt latency from the MIPS core, while the on-chip DDR2 controller absorbs the memory bandwidth demanded by frame-buffer refreshes at full panel resolution.
Typical applications include industrial HMI panels, home-automation gateways with touch displays, point-of-sale terminals, medical patient monitors, and CAN/USB-connected sensor hubs. The 200 MHz core and large SRAM make it equally suitable for GUI, motor-control, and audio-processing sub-systems.
When designing with this device, watch the LFBGA escape routing and provide at least four PCB layers with via-in-pad recommended for the inner-row balls. Use Microchip's MPLAB Harmony configurator to initialize the DDR2 controller and Graphics Processor - manual register-level bring-up is rarely practical for production timelines.
This page synthesizes distributor pricing, drop-in LFBGA-169 alternatives, and practical bring-up guidance not found in the manufacturer datasheet alone.
Bộ thay thế dễ dàng lắp đặt cho PIC32MZ2025DAB169T-I/HF — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC32MZ2025DAB169T-I/HF (cùng hình factor và footprint) — khác nhau ở Graphics Controller, CAN, USB, Core Architecture, Operating Temperature.
PIC32MZ2025DAB169-I/HF
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC32MZ2025DAB169T-V/HF
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC32MZ1064DAB169T-I/HF
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ1064DAB169-I/HF
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ1025DAB169T-I/HF
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →PIC32MZ1025DAB169-I/HF
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →PIC32MZ1025DAL169T-I/HF
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →PIC32MZ2025DAB169T-I/HF Tỷ lệ tối đa & tính chất điện
| Core Architecture | MIPS32 microAptiv |
| Family | PIC32MZ DA |
| Bề rộng đường dữ liệu | 32-bit |
| Maximum CPU Clock | 200 MHz |
| Flash Memory | 2 MB (2M x 8) |
| SRAM | 640 KB |
| Hộp | 169-LFBGA (11x11 mm) |
| Điện áp cung cấp | 3.3 V |
| ADC | 12-bit, 18 MSPS, up to 45 analog inputs |
| Graphics Controller | Integrated (parallel RGB TFT up to WXGA) |
| Graphics Processor | Integrated 2D accelerator |
| External Memory Bus | DDR2 controller, up to 128 MB addressable |
| CAN | Yes |
| USB | Hi-Speed USB |
| Nhiệt độ hoạt động | -40C to +85C (industrial, I grade) |
| Kiểu lắp đặt | Surface Mount |
| Trạng thái RoHS | Compliant |
Hướng dẫn cấu hình chân PIC32MZ2025DAB169T-I/HF 169-lfbga (11x11 mm)
Cấu hình chân cho PIC32MZ2025DAB169T-I/HF (169-lfbga (11x11 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho PIC32MZ2025DAB169T-I/HF.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PIC32MZ2025DAB169T-I/HF phù hợp cho 6 Áp dụngs: Industrial HMI Touch Panels, Home-Automation Gateways, Point-of-Sale (POS) Terminals, Medical Patient Monitors, Connected Sensor Hubs, Automotive Infotainment Displays.
Industrial HMI Touch Panels
The PIC32MZ2025DAB169T-I/HF fits industrial HMI panels because its integrated 2D Graphics Processor drives TFT up to WXGA without an external GPU, while 640 KB SRAM and 2 MB Flash host full LVGL/emWin stacks plus assets. The 12-bit 18 MSPS ADC with up to 45 inputs reads analog sensors (pressure, temperature, current) alongside the display. Hi-Speed USB and CAN let the panel appear as a fieldbus gateway to a PLC. The 200 MHz MIPS32 microAptiv core refreshes the framebuffer while still leaving headroom for the touch event loop.
Được đề xuất
Home-Automation Gateways
For home-automation gateways with a small touchscreen, the PIC32MZ2025DAB169T-I/HF combines an integrated DDR2 controller (up to 128 MB) for icon/asset caching with Hi-Speed USB and CAN for bridging to Wi-Fi/Ethernet modules and HVAC busses. The 2 MB Flash stores rich UI assets and the Zigbee/Thread stack glue. The 169-LFBGA 11x11 mm footprint keeps the gateway PCB slim enough for wall-mount enclosures, and the 200 MHz MIPS32 microAptiv core runs the GUI plus TLS handshake without RTOS jitter.
Được đề xuất
Point-of-Sale (POS) Terminals
The PIC32MZ2025DAB169T-I/HF suits POS terminals because its WXGA-capable Graphics Controller drives the merchant-facing color display while Hi-Speed USB connects to barcode scanners, receipt printers, and PIN pads. The 640 KB SRAM buffers transaction UIs and signature images; the 2 MB Flash holds fonts, logos, and the payment-app stub. The 12-bit 18 MSPS ADC samples battery telemetry or analog tamper sensors. The industrial -40C to +85C temperature grade handles retail-environment thermal swings.
Được đề xuất
Medical Patient Monitors
For portable patient monitors the PIC32MZ2025DAB169T-I/HF delivers 200 MHz throughput with 640 KB SRAM to render real-time waveforms, while the 12-bit 18 MSPS ADC digitizes ECG, SpO2, and respiration channels simultaneously. CAN bus connectivity links bedside modules, and Hi-Speed USB streams waveform data to a host PC for analysis. The 2 MB Flash holds the device firmware plus multilingual UI assets. The integrated 2D Graphics Processor accelerates scrolling waveforms without taxing the CPU.
Được đề xuất
Connected Sensor Hubs
The PIC32MZ2025DAB169T-I/HF serves as a CAN/USB-connected sensor hub by aggregating up to 45 analog inputs through the 12-bit 18 MSPS ADC and pushing processed data upstream via Hi-Speed USB. The 2 MB Flash stores configuration and calibration tables; the 640 KB SRAM buffers time-series data. The 200 MHz MIPS32 microAptiv core runs lightweight DSP filters on incoming samples while leaving headroom for protocol conversion. Industrial temperature grade supports factory-floor deployment.
Được đề xuất
Automotive Infotainment Displays
For aftermarket and lower-tier automotive infotainment displays, the PIC32MZ2025DAB169T-I/HF integrates a parallel RGB TFT controller for WVGA/WXGA panels plus CAN for vehicle network access. The 2 MB Flash hosts boot logos and simple navigation UI assets; the 640 KB SRAM drives the framebuffer. For designs needing AEC-Q100 qualification, the PIC32MZ2025DAB169T-V/HF (105C V grade) is a drop-in alternative in the same 169-LFBGA footprint.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC32MZ2025DAB169T-I/HF — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC32MZ2025DAB169-I/HF | PIC32MZ2025DAB169T-V/HF | PIC32MZ1064DAB169T-I/HF | PIC32MZ1025DAB169T-I/HF |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 169-LFBGA (11x11 mm) | 169-LFBGA (11x11) - same | 169-LFBGA (11x11) - same | 169-LFBGA (11x11) - same | 169-LFBGA (11x11) - same |
| Core | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | ARM Cortex-M4 |
| Flash Memory | 2 MB | 2 MB | 2 MB | 1 MB | 1 MB |
| SRAM | 640 KB | 640 KB | 640 KB | 640 KB | 256 KB |
| Maximum Clock | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +105C | -40C to +85C | -40C to +85C |
| Graphics Controller | Integrated + 2D GPU | Integrated + 2D GPU | Integrated + 2D GPU | Integrated + 2D GPU | Integrated (no 2D GPU) |
| Packaging Media | Tape & Reel | Tray | Tape & Reel | Tape & Reel | Tape & Reel |
Bảo phân biệt quan trọng
- Integrated 2D Graphics Processor at the same footprint (vsPIC32MZ1025DAB169T-I/HF)
- Doubled Flash density versus 1064 part in same package (vsPIC32MZ1064DAB169T-I/HF)
- Higher temperature grade available as drop-in (vsPIC32MZ2025DAB169T-V/HF)
Ghi chú thiết kế
The 169-LFBGA 11x11 mm package has balls on a 0.8 mm pitch, with inner rows requiring via-in-pad escape on at least 4 PCB layers. Per Microchip PIC32MZ DA design notes, use 0.4 mm laser-drilled microvias and a 1 oz copper ground flood directly under the BGA to keep the inner-row return paths continuous. Skip solder-mask-defined pads on the BGA - use non-solder-mask-defined (NSMD) with a 0.3 mm pad diameter for higher assembly yield.
The PIC32MZ DA device requires a low-noise 3.3 V core rail plus 1.8 V for the DDR2 controller; Microchip recommends decoupling with 100 nF X7R ceramic capacitors within 2 mm of every VDDCORE/VDDIO power ball, plus four 10 uF X5R bulk capacitors near the package perimeter. Power-on sequencing requires VDDIO before VDDCORE; failure to observe the order risks latch-up. Use Microchip's MCP16502 multi-rail PMIC for an integrated solution.
Do not assume the DDR2 controller self-initializes: the MPLAB Harmony configurator must generate the DDR2 timing block per the chosen SDRAM datasheet (tRCD, tRP, tRFC, MR settings). Engineers attempting manual DDR2 bring-up frequently hit data-eye failures from uncalibrated output impedance. Also verify the Graphics Processor source clock - the default 30 MHz LPRC is insufficient for WXGA panels and must be switched to the 24 MHz primary oscillator with the on-chip PLL.
Thông tin tuân thủ
RoHS compliance confirmed by Microchip product page. The I grade is not AEC-Q100; the V grade (PIC32MZ2025DAB169T-V/HF) is also not AEC-Q100 but supports a wider -40C to +105C range. Halogen-free status not explicitly stated in the provided data.