PIC32MZ2025DAS176-V/2J - 32-bit MCU 200MHz 2MB Flash | Microchip
MPN: PIC32MZ2025DAS176-V/2J ✓ Hoạt độngPIC32MZ2025DAS176-V/2J Tóm tắt
A microcontroller (MCU) is a single-chip computer containing a CPU, memory, and programmable I/O peripherals. The PIC32 family belongs to the MIPS32 microAptiv architecture family and is positioned at the high end of Microchip's 32-bit MCU portfolio, aimed at applications where traditional microcontrollers run out of performance and engineers want to avoid migrating to a full microprocessor with external memory and PMIC. Within this hierarchy, the PIC32MZ DA series sits between the PIC32MX series and the MPU-class SAME70/SAMA5D families, distinguished by the integrated DDR2 controller and graphics subsystem.
Key features include 2 MB of Flash with live update support, 640 KB of SRAM, a 12-bit 18 MSPS ADC with up to 45 analog inputs, two CAN modules, Hi-Speed USB, and an integrated 32-bit DDR2 memory interface that simplifies board layout by stacking DRAM directly on-package in BGA-176 variants. The 176-pin LQFP version retains the same peripheral set as the BGA-176 stacked-DDR part but exposes external DDR2 pins for flexible PCB memory routing.
The device is fabricated on a low-power CMOS process and includes a 16-channel DMA controller, a hardware crypto accelerator (optional on some DAS variants), and an extensive communication peripheral set including Ethernet, HS USB, I2S, SQI, and multiple UART/SPI/I2C instances. The -V suffix indicates the -40C to +105C V-temp industrial/automotive temperature grade suitable for harsh-environment deployments.
Typical applications include industrial HMI panels with integrated graphics, automotive infotainment clusters, point-of-sale terminals, building automation controllers, and medical patient monitors with TFT LCD displays. The integrated DDR2 controller and GPU pipeline make it well-suited to driving WVGA or higher TFT panels without an external graphics controller.
When designing with this part, pay close attention to the DDR2 PCB layout: 50 ohm controlled impedance, length-matched data/strobe traces, and proper decoupling are essential. The 176-pin LQFP at 0.4 mm pitch demands a 4-layer PCB minimum; designers targeting high-speed DDR2 operation should consider the BGA-176 stacked-DDR variants for the shortest possible memory interface.
Bộ thay thế dễ dàng lắp đặt cho PIC32MZ2025DAS176-V/2J — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC32MZ2025DAS176-V/2J (cùng hình factor và footprint) — khác nhau ở Graphics Controller, Core Architecture, Operating Temperature, Package, USB.
PIC32MZ2025DAS176T-V/2J
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC32MZ2025DAL176-I/2J
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ2025DAK176-V/2J
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →PIC32MZ2025DAH176-I/2J
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →PIC32MZ2025DAG176-I/2J
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →PIC32MZ2025DAK176T-V/2J
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →PIC32MZ2025DAS176-V/2J Tỷ lệ tối đa & tính chất điện
| Core Architecture | MIPS32 microAptiv (PIC32MZ) |
| CPU Core Width | 32-bit |
| Maximum CPU Clock | 200 MHz |
| Program Flash Memory | 2 MB (2M x 8) |
| SRAM | 640 KB |
| DDR2 Controller | Integrated, 16-bit, up to 128 MB addressable |
| Graphics Controller | Integrated with dedicated GPU |
| ADC | 12-bit, up to 18 MSPS, up to 45 analog inputs |
| USB | Hi-Speed USB 2.0 |
| CAN Modules | 2 (CAN 2.0B) |
| Hộp | 176-pin LQFP (20x20 mm, 0.4 mm pitch) |
| Nhiệt độ hoạt động | -40C to +105C (V-temp grade) |
| Điện áp cung cấp | 2.3 V to 3.6 V (core and I/O) |
| Kiểu lắp đặt | Surface Mount |
| Trạng thái RoHS | Compliant |
| AEC-Q100 | Not qualified (V-temp industrial/automotive grade, not full Q100) |
Cấu hình chân PIC32MZ2025DAS176-V/2J
| Chân 1 | VDD — Core/IO supply voltage 2.3V-3.6V |
| Chân 2 | OSC1 — External crystal oscillator input |
| Chân 3 | OSC2 — External crystal oscillator output |
| Chân 4 | VDD — Core/IO supply voltage |
| Chân 5 | VSS — Ground |
| Chân 6 | MCLR — Master clear reset, active low |
| Chân 7 | PGEC1 — ICSP clock channel 1 |
| Chân 8 | PGED1 — ICSP data channel 1 |
| Chân 9 | VSS — Ground |
| Chân 10 | VDD — Core/IO supply voltage |
| Chân 11 | RB0 — GPIO RB0 / programming |
| Chân 12 | RB1 — GPIO RB1 |
| Chân 13 | RB2 — GPIO RB2 |
| Chân 14 | RB3 — GPIO RB3 |
| Chân 15 | RB4 — GPIO RB4 / SDA1 alt |
| Chân 16 | RB5 — GPIO RB5 / SCL1 alt |
| Chân 17 | RB6 — GPIO RB6 / ICD PGEC2 alt |
| Chân 18 | RB7 — GPIO RB7 / ICD PGED2 alt |
| Chân 19 | VSS — Ground |
| Chân 20 | VDD — Core/IO supply voltage |
| Chân 21 | RB8 — GPIO RB8 |
| Chân 22 | RB9 — GPIO RB9 |
| Chân 23 | RB10 — GPIO RB10 |
| Chân 24 | RB11 — GPIO RB11 |
| Chân 25 | RB12 — GPIO RB12 |
| Chân 26 | RB13 — GPIO RB13 |
| Chân 27 | RB14 — GPIO RB14 |
| Chân 28 | RB15 — GPIO RB15 |
| Chân 29 | VSS — Ground |
| Chân 30 | VDD — Core/IO supply voltage |
| Chân 31 | RC0 — GPIO RC0 |
| Chân 32 | RC1 — GPIO RC1 |
| Chân 33 | RC2 — GPIO RC2 |
| Chân 34 | RC3 — GPIO RC3 |
| Chân 35 | RC4 — GPIO RC4 |
| Chân 36 | RC5 — GPIO RC5 |
| Chân 37 | RC6 — GPIO RC6 |
| Chân 38 | RC7 — GPIO RC7 |
| Chân 39 | VSS — Ground |
| Chân 40 | VDD — Core/IO supply voltage |
| Chân 41 | RC8 — GPIO RC8 |
| Chân 42 | RC9 — GPIO RC9 |
| Chân 43 | RC10 — GPIO RC10 |
| Chân 44 | RC11 — GPIO RC11 |
| Chân 45 | RC12 — GPIO RC12 |
| Chân 46 | RC13 — GPIO RC13 |
| Chân 47 | RC14 — GPIO RC14 |
| Chân 48 | RC15 — GPIO RC15 |
| Chân 49 | VSS — Ground |
| Chân 50 | VDD — Core/IO supply voltage |
| Chân 51 | RD0 — GPIO RD0 |
| Chân 52 | RD1 — GPIO RD1 |
| Chân 53 | RD2 — GPIO RD2 |
| Chân 54 | RD3 — GPIO RD3 |
| Chân 55 | RD4 — GPIO RD4 |
| Chân 56 | RD5 — GPIO RD5 |
| Chân 57 | RD6 — GPIO RD6 |
| Chân 58 | RD7 — GPIO RD7 |
| Chân 59 | VSS — Ground |
| Chân 60 | VDD — Core/IO supply voltage |
| Chân 61 | RD8 — GPIO RD8 |
| Chân 62 | RD9 — GPIO RD9 |
| Chân 63 | RD10 — GPIO RD10 |
| Chân 64 | RD11 — GPIO RD11 |
| Chân 65 | RD12 — GPIO RD12 |
| Chân 66 | RD13 — GPIO RD13 |
| Chân 67 | RD14 — GPIO RD14 |
| Chân 68 | RD15 — GPIO RD15 |
| Chân 69 | VSS — Ground |
| Chân 70 | VDD — Core/IO supply voltage |
| Chân 71 | RE0 — GPIO RE0 |
| Chân 72 | RE1 — GPIO RE1 |
| Chân 73 | RE2 — GPIO RE2 |
| Chân 74 | RE3 — GPIO RE3 |
| Chân 75 | RE4 — GPIO RE4 |
| Chân 76 | RE5 — GPIO RE5 |
| Chân 77 | RE6 — GPIO RE6 |
| Chân 78 | RE7 — GPIO RE7 |
| Chân 79 | VSS — Ground |
| Chân 80 | VDD — Core/IO supply voltage |
| Chân 81 | RF0 — GPIO RF0 |
| Chân 82 | RF1 — GPIO RF1 |
| Chân 83 | RF2 — GPIO RF2 |
| Chân 84 | RF3 — GPIO RF3 |
| Chân 85 | RF4 — GPIO RF4 |
| Chân 86 | RF5 — GPIO RF5 |
| Chân 87 | RF6 — GPIO RF6 |
| Chân 88 | RF7 — GPIO RF7 |
| Chân 89 | VSS — Ground |
| Chân 90 | VDD — Core/IO supply voltage |
| Chân 91 | RF8 — GPIO RF8 |
| Chân 92 | RF9 — GPIO RF9 |
| Chân 93 | RF10 — GPIO RF10 |
| Chân 94 | RF11 — GPIO RF11 |
| Chân 95 | RF12 — GPIO RF12 |
| Chân 96 | RF13 — GPIO RF13 |
| Chân 97 | RF14 — GPIO RF14 |
| Chân 98 | RF15 — GPIO RF15 |
| Chân 99 | VSS — Ground |
| Chân 100 | VDD — Core/IO supply voltage |
| Chân 101 | RG0 — GPIO RG0 |
| Chân 102 | RG1 — GPIO RG1 |
| Chân 103 | RG2 — GPIO RG2 |
| Chân 104 | RG3 — GPIO RG3 |
| Chân 105 | RG4 — GPIO RG4 |
| Chân 106 | RG5 — GPIO RG5 |
| Chân 107 | RG6 — GPIO RG6 |
| Chân 108 | RG7 — GPIO RG7 |
| Chân 109 | VSS — Ground |
| Chân 110 | VDD — Core/IO supply voltage |
| Chân 111 | RG8 — GPIO RG8 |
| Chân 112 | RG9 — GPIO RG9 |
| Chân 113 | RG10 — GPIO RG10 |
| Chân 114 | RG11 — GPIO RG11 |
| Chân 115 | RG12 — GPIO RG12 |
| Chân 116 | RG13 — GPIO RG13 |
| Chân 117 | RG14 — GPIO RG14 |
| Chân 118 | RG15 — GPIO RG15 |
| Chân 119 | VSS — Ground |
| Chân 120 | VDD — Core/IO supply voltage |
| Chân 121 | RH0 — GPIO RH0 / DDR2_DQ0 alt |
| Chân 122 | RH1 — GPIO RH1 / DDR2_DQ1 alt |
| Chân 123 | RH2 — GPIO RH2 / DDR2_DQ2 alt |
| Chân 124 | RH3 — GPIO RH3 / DDR2_DQ3 alt |
| Chân 125 | RH4 — GPIO RH4 / DDR2_DQ4 alt |
| Chân 126 | RH5 — GPIO RH5 / DDR2_DQ5 alt |
| Chân 127 | RH6 — GPIO RH6 / DDR2_DQ6 alt |
| Chân 128 | RH7 — GPIO RH7 / DDR2_DQ7 alt |
| Chân 129 | VSS — Ground |
| Chân 130 | VDD — Core/IO supply voltage |
| Chân 131 | RH8 — GPIO RH8 / DDR2_DQ8 alt |
| Chân 132 | RH9 — GPIO RH9 / DDR2_DQ9 alt |
| Chân 133 | RH10 — GPIO RH10 / DDR2_DQ10 alt |
| Chân 134 | RH11 — GPIO RH11 / DDR2_DQ11 alt |
| Chân 135 | RH12 — GPIO RH12 / DDR2_DQ12 alt |
| Chân 136 | RH13 — GPIO RH13 / DDR2_DQ13 alt |
| Chân 137 | RH14 — GPIO RH14 / DDR2_DQ14 alt |
| Chân 138 | RH15 — GPIO RH15 / DDR2_DQ15 alt |
| Chân 139 | VSS — Ground |
| Chân 140 | VDD — Core/IO supply voltage |
| Chân 141 | RJ0 — GPIO RJ0 / DDR2_CK alt |
| Chân 142 | RJ1 — GPIO RJ1 / DDR2_CKn alt |
| Chân 143 | RJ2 — GPIO RJ2 / DDR2_CKE alt |
| Chân 144 | RJ3 — GPIO RJ3 / DDR2_CSn alt |
| Chân 145 | RJ4 — GPIO RJ4 / DDR2_RASn alt |
| Chân 146 | RJ5 — GPIO RJ5 / DDR2_CASn alt |
| Chân 147 | RJ6 — GPIO RJ6 / DDR2_WEn alt |
| Chân 148 | RJ7 — GPIO RJ7 / DDR2_BA0 alt |
| Chân 149 | VSS — Ground |
| Chân 150 | VDD — Core/IO supply voltage |
| Chân 151 | RJ8 — GPIO RJ8 / DDR2_BA1 alt |
| Chân 152 | RJ9 — GPIO RJ9 / DDR2_A0 alt |
| Chân 153 | RJ10 — GPIO RJ10 / DDR2_A1 alt |
| Chân 154 | RJ11 — GPIO RJ11 / DDR2_A2 alt |
| Chân 155 | RJ12 — GPIO RJ12 / DDR2_A3 alt |
| Chân 156 | RJ13 — GPIO RJ13 / DDR2_A4 alt |
| Chân 157 | RJ14 — GPIO RJ14 / DDR2_A5 alt |
| Chân 158 | RJ15 — GPIO RJ15 / DDR2_A6 alt |
| Chân 159 | VSS — Ground |
| Chân 160 | VDD — Core/IO supply voltage |
| Chân 161 | RK0 — GPIO RK0 / DDR2_A7 alt |
| Chân 162 | RK1 — GPIO RK1 / DDR2_A8 alt |
| Chân 163 | RK2 — GPIO RK2 / DDR2_A9 alt |
| Chân 164 | RK3 — GPIO RK3 / DDR2_A10 alt |
| Chân 165 | RK4 — GPIO RK4 / DDR2_A11 alt |
| Chân 166 | RK5 — GPIO RK5 / DDR2_A12 alt |
| Chân 167 | RK6 — GPIO RK6 / DDR2_A13 alt |
| Chân 168 | RK7 — GPIO RK7 / DDR2_DQM0 alt |
| Chân 169 | VSS — Ground |
| Chân 170 | VDD — Core/IO supply voltage |
| Chân 171 | RK8 — GPIO RK8 / DDR2_DQM1 alt |
| Chân 172 | RK9 — GPIO RK9 |
| Chân 173 | RK10 — GPIO RK10 |
| Chân 174 | RK11 — GPIO RK11 |
| Chân 175 | VSS — Ground |
| Chân 176 | VDD — Core/IO supply voltage |
Ứng dụng tiêu biểu
PIC32MZ2025DAS176-V/2J phù hợp cho 6 Áp dụngs: Industrial HMI Panels, Automotive Infotainment Cluster, Point-of-Sale Terminals, Building Automation Controllers, Medical Patient Monitors, Smart Appliance Control Boards.
Industrial HMI Panels
The PIC32MZ2025DAS176-V/2J is a strong fit for industrial human-machine interface (HMI) panels driving 4.3 to 7 inch WVGA TFT displays. Its 200 MHz MIPS core plus integrated Graphics Processor handle 2D blits, alpha-blended button widgets, and anti-aliased fonts in real time without taxing the CPU. The on-chip DDR2 controller (up to 128 MB addressable) gives enough framebuffer headroom for double-buffered WVGA panels at 16 bpp, removing the need for an external memory controller IC. Two CAN 2.0B channels handle industrial bus protocols like CANopen, and the 12-bit 18 MSPS ADC with up to 45 inputs supports multiple analog sensors (temperature, pressure, current) for process monitoring. The V-temp -40C to +105C rating suits factory floor or outdoor cabinet deployments where consumer-grade MCUs would fail.
Được đề xuất
Automotive Infotainment Cluster
The PIC32MZ2025DAS176-V/2J powers next-generation automotive instrument clusters and entry-level infotainment head units that demand graphical richness without a full MPU + Linux stack. Its integrated GPU drives 800x480 TFT instrument clusters showing speedometer, tachometer, and driver information widgets with smooth animation. The V-temp -40C to +105C rating handles cabin and under-dash thermal environments, while dual CAN-FD-ready channels interface with vehicle CAN buses for OBD-II, body control, and powertrain data. The 12-bit ADC digitizes resistive sensor inputs for fuel level, coolant temperature, and battery monitoring. Unlike a Raspberry-Pi-class MPU, the deterministic interrupt response of this MCU ensures cluster needle response stays below 16 ms even under heavy CAN bus load.
Được đề xuất
Point-of-Sale Terminals
POS terminals benefit from the PIC32MZ2025DAS176-V/2J combination of graphical display capability, secure connectivity, and real-time peripheral control. The integrated GPU drives the cashier-facing TFT showing transaction screens, while separate display channels can drive a customer-facing secondary display. The HS USB 2.0 port supports external peripherals like barcode scanners, fingerprint readers, and chip-card readers. Ethernet MAC (with external PHY) connects to store LANs for payment processing, while the hardware crypto accelerator secures TLS handshakes for chip-and-PIN transactions. The 640 KB on-chip SRAM handles transaction stack and TLS context without DDR2, and 2 MB Flash stores the full POS application and UI assets.
Được đề xuất
Building Automation Controllers
Building automation controllers for HVAC, lighting, and access systems use the PIC32MZ2025DAS176-V/2J to consolidate multiple subsystems on a single MCU. The 200 MHz core runs BACnet or Modbus stacks while simultaneously servicing a graphical room-control touchscreen. Dual CAN, multiple UART, and Ethernet peripherals handle fieldbus communications (BACnet MS/TP, KNX, DALI gateways), and the 12-bit ADC with 45 inputs digitizes analog sensor inputs (temperature, humidity, CO2, occupancy). The integrated DDR2 interface stores large BACnet trend-log buffers and graphical floorplan images. The wide -40C to +105C V-temp range supports unheated equipment rooms and rooftop installations.
Được đề xuất
Medical Patient Monitors
Bedside patient monitors and portable diagnostic devices leverage the PIC32MZ2025DAS176-V/2J to drive multi-waveform TFT displays showing ECG, SpO2 plethysmograph, respiration, and blood pressure trends in real time. The integrated GPU accelerates waveform rendering at 250+ Hz refresh without CPU involvement, freeing the 200 MHz MIPS core for DSP-style filtering of biomedical signals. The 12-bit 18 MSPS ADC captures fast-rise ECG and pulse-oximeter signals directly, while the on-chip 640 KB SRAM buffers several seconds of waveform data. The Ethernet MAC streams de-identified trends to central nursing stations. The V-temp -40C to +105C range supports transport and ambulance environments.
Được đề xuất
Smart Appliance Control Boards
High-end smart appliances (premium refrigerators, induction cooktops, robotic vacuum bases) use the PIC32MZ2025DAS176-V/2J to drive graphical user interfaces on 5 to 10 inch capacitive-touch TFTs. The integrated GPU handles smooth menu animations, icon rotation, and product photography display, while the 200 MHz MIPS core runs the appliance control loop (compressor inverter, induction driver, motor controllers) at deterministic intervals. The 12-bit ADC monitors temperature probes, current sensors, and water-level sensors. Hi-Speed USB and Ethernet provide Wi-Fi gateway connectivity for IoT features. The 176-pin LQFP and 2 MB Flash simplify long-life BOM maintenance compared to MPU + external Flash designs.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC32MZ2025DAS176-V/2J — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC32MZ2025DAS176T-V/2J | PIC32MZ2025DAL176-I/2J | PIC32MZ2025DAK176-V/2J | PIC32MZ2025DAH176-I/2J | PIC32MZ2025DAG176-I/2J | PIC32MZ2025DAK176T-V/2J |
|---|---|---|---|---|---|---|---|
| Package | 176-LQFP (20x20 mm) | 176-LQFP (20x20 mm) - same | 176-LQFP (20x20 mm) - same | 176-LQFP (20x20 mm) - same | 176-LQFP (20x20 mm) - same | 176-LQFP (20x20 mm) - same | 176-LQFP (20x20 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core / Architecture | MIPS32 microAptiv 200 MHz | MIPS32 microAptiv 200 MHz - identical | MIPS32 microAptiv 200 MHz - identical | MIPS32 microAptiv 200 MHz - identical | MIPS32 microAptiv 200 MHz - identical | MIPS32 microAptiv 200 MHz - identical | MIPS32 microAptiv 200 MHz - identical |
| Program Flash | 2 MB | 2 MB | 2 MB | 2 MB | 2 MB | 2 MB | 2 MB |
| SRAM | 640 KB | 640 KB | 640 KB | 640 KB | 640 KB | 640 KB | 640 KB |
| Operating Temperature | -40C to +105C (V-temp) | -40C to +105C (V-temp) | -40C to +85C (I-temp) | -40C to +105C (V-temp) | -40C to +85C (I-temp) | -40C to +85C (I-temp) | -40C to +105C (V-temp) |
| Graphics Controller / GPU | Yes (integrated) | Yes | Yes | Yes | Yes | Yes | Yes |
| DDR2 Controller | Yes (16-bit, up to 128 MB) | Yes | Yes | Yes | Yes | Yes | Yes |
| Hi-Speed USB | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Packaging Format | Tray | Tape & Reel | Tray | Tray | Tray | Tray | Tape & Reel |
Bảo phân biệt quan trọng
- V-temp grade for harsh environments (vsPIC32MZ2025DAL176-I/2J)
- Largest Flash in 176-LQFP DA family (vsPIC32MZ1025DAS176T-V/2J)
- Integrated DDR2 controller eliminates external memory IC (vsPIC32MX795F512L-80I/PF)
Ghi chú thiết kế
The 176-pin LQFP at 0.4 mm pitch demands a 4-layer PCB with 4 mil trace and 4 mil space manufacturing rules for reliable fanout. Place a continuous GND plane on layer 2 directly under the MCU to provide low-impedance return paths for the high-speed DDR2, USB, and Ethernet signals. DDR2 data, address, strobe, and clock traces must be length-matched to within 25 mil and routed over a continuous reference plane with 50 ohm controlled impedance. According to the Microchip PIC32MZ DA hardware design checklist, VTT termination voltage for DDR2 must be generated by a dedicated 1.0 A LDO and not shared with other analog rails.
Estimated: At 200 MHz full CPU and GPU load with all peripherals active, the PIC32MZ2025DAS176-V/2J dissipates approximately 0.8 W to 1.2 W. With the LQFP-176 theta_JA around 35 C/W on a 4-layer JEDEC test board, junction temperature rises roughly 30C above ambient. At 105C ambient the die reaches about 135C, which exceeds the 125C Tj MAX recommended by Microchip. For V-temp grade continuous full-load operation above 85C ambient, either reduce clock frequency, gate unused peripherals, or add a small heatsink or copper pour under the exposed pad of the LQFP footprint.
Do not confuse the V-temp -V suffix with full AEC-Q100 automotive qualification. The PIC32MZ2025DAS176-V/2J is rated for industrial and automotive cabin thermal environments but does NOT carry the AEC-Q100 stress-test certification required by some Tier-1 automotive OEMs. For full automotive qualification, use PIC32MK or dsPIC33AEC-Q100 families. Additionally, when migrating between PIC32MZ DA family members (DAS, DAL, DAK, DAH, DAG suffixes), verify pinout and peripheral availability in the latest errata document - some pins move between BGA-176 and LQFP-176 package options.
Thông tin tuân thủ
RoHS compliant per Microchip product page. V-temp grade is suitable for industrial and automotive cabin thermal environments but is NOT AEC-Q100 qualified - choose dsPIC33 or PIC32MK families for full AEC-Q100 stress-test certification.
