S9KEAZN8ACFK557 - KEA 32-bit MCU, 8KB Flash, 48MHz Cortex-M0+ | NXP
MPN: S9KEAZN8ACFK557 ✓ Hoạt độngS9KEAZN8ACFK557 Tóm tắt
A microcontroller (MCU) is an integrated circuit that combines a CPU core, volatile memory (RAM), non-volatile memory (flash), and a rich set of peripherals on a single die. KEA devices sit within the broader hierarchy of ARM Cortex-M microcontrollers -> embedded microcontrollers -> microprocessors -> integrated circuits. The Cortex-M0+ core is the smallest and most energy-efficient ARM core, optimized for deterministic embedded control and low active/standby power. Kinetis E variants extend this architecture with enhanced electromagnetic compatibility (EMC) and electrostatic discharge (ESD) tolerance for harsh electrical environments.
Key features include 8 KB program flash, 1 KB SRAM, an 8-channel 12-bit SAR ADC, flexible timer modules (FTM) for PWM generation, up to 23 general-purpose I/O pins, multiple serial communication peripherals (SCI/UART, SPI, I2C), an internal 48 MHz oscillator, and an operating voltage range of 2.7 V to 5.5 V. The device supports -40 C to +125 C ambient operation, suiting automotive under-hood and industrial cabinet deployments.
Architecturally, the S9KEAZN8ACFK557 leverages an ultra-low-leakage 90 nm process node, integrates an on-chip bandgap reference for accurate ADC conversions, and includes a sophisticated clock gating scheme that allows peripheral blocks to be powered down independently. The KEA family achieves IEC 60730 / IEC 61000-4-4/4-2 EMC robustness for appliance and automotive body domains.
Typical applications include automotive body controllers, HVAC fan and blower modules, seat control units, small motor drivers (BLDC and brushed DC), sensor interfaces, smart appliance control boards, and industrial sensor nodes. The 24-QFN footprint suits compact PCB layouts where board real estate is at a premium.
When designing with this part, ensure the decoupling capacitor network follows the NXP KEA reference manual. A 100 nF ceramic must be placed within 3 mm of the VDDA pin, and an additional 4.7 uF bulk capacitor is recommended on VDD for ADC measurement stability. The ADC reference voltage (VREFH) should be tied to VDDA for most body-electronics uses.
This page synthesizes distributor pricing (DigiKey/LCSC/Octopart), 24-QFN drop-in equivalents within the Kinetis E family, and practical layout notes not assembled in the manufacturer datasheet alone.
Bộ thay thế dễ dàng lắp đặt cho S9KEAZN8ACFK557 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với S9KEAZN8ACFK557 (cùng hình factor và footprint) — khác nhau ở Package, Communication Peripherals, MSL Level, Maximum Clock Frequency, Watchdog.
S9KEAZN8ACFK
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →S9KEAZN16ACFK
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
S9KEAZN8AMFK
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
S9KEAZN32ACFK
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
S9KEAZN64AMLK
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MC9S08QD4CSC
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →S9KEAZN8ACFK557 Tỷ lệ tối đa & tính chất điện
| Core Architecture | ARM Cortex-M0+ |
| Bề rộng đường dữ liệu | 32-bit |
| Tần số xung maksimum | 48 MHz |
| Program Memory Size | 8 KB (8K x 8) Flash |
| RAM Size | 1 KB |
| Điện áp cung cấp hoạt động | 2.7 V to 5.5 V |
| Hộp | 24-QFN (4x4 mm) |
| Kiểu lắp đặt | Surface Mount |
| Khoảng nhiệt độ hoạt động | -40 C to +125 C |
| ADC | 12-bit SAR, up to 8 channels |
| Number of I/O Pins | 23 |
| Communication Peripherals | 1x SCI (UART), 1x SPI, 1x I2C |
| Timers/PWM (FTM) | 2x FlexTimer Module, supports PWM |
| Watchdog | Yes (WDOG with independent clock) |
| Cấp MSL | 3 (168 hours) |
| Trạng thái RoHS | Compliant |
| Family | Kinetis KEA |
Cấu hình chân S9KEAZN8ACFK557
| Chân 1 | PTA0/FTM0_CH0/ADP0 — GPIO / FTM0 channel 0 / ADC channel 0 |
| Chân 2 | PTA1/FTM0_CH1/ADP1 — GPIO / FTM0 channel 1 / ADC channel 1 |
| Chân 3 | PTA2/FTM0_CH2/ADP2 — GPIO / FTM0 channel 2 / ADC channel 2 |
| Chân 4 | PTA3/FTM0_CH3/ADP3 — GPIO / FTM0 channel 3 / ADC channel 3 |
| Chân 5 | VDDA — Analog supply voltage |
| Chân 6 | VSSA — Analog ground |
| Chân 7 | VREFH — ADC voltage reference high |
| Chân 8 | VREFL — ADC voltage reference low |
| Chân 9 | PTB0/SPI0_SCK — GPIO / SPI0 clock |
| Chân 10 | PTB1/SPI0_MOSI — GPIO / SPI0 master-out-slave-in |
| Chân 11 | PTB2/SPI0_MISO — GPIO / SPI0 master-in-slave-out |
| Chân 12 | PTB3/SPI0_PCS — GPIO / SPI0 peripheral chip select |
| Chân 13 | PTB4/I2C0_SCL — GPIO / I2C0 clock |
| Chân 14 | PTB5/I2C0_SDA — GPIO / I2C0 data |
| Chân 15 | PTC0/SCIO_TX — GPIO / UART0 transmit |
| Chân 16 | PTC1/SCIO_RX — GPIO / UART0 receive |
| Chân 17 | PTC2/FTM1_CH0 — GPIO / FTM1 channel 0 |
| Chân 18 | PTC3/FTM1_CH1 — GPIO / FTM1 channel 1 |
| Chân 19 | PTC4/RESET_b — GPIO / Reset (active-low, shared pin) |
| Chân 20 | VDD — Digital supply voltage |
| Chân 21 | VSS — Digital ground |
| Chân 22 | PTC5/NMI_b — GPIO / Non-maskable interrupt (shared pin) |
| Chân 23 | PTC6/ADP4 — GPIO / ADC channel 4 |
| Chân 24 | EP — Exposed thermal pad - connect to ground plane |
Ứng dụng tiêu biểu
S9KEAZN8ACFK557 phù hợp cho 6 Áp dụngs: Automotive Body Controller, HVAC Blower Motor Controller, Seat Control Module, Industrial Sensor Node, Small Appliance Control Board, Smart Home Sensor Hub.
Automotive Body Controller
The S9KEAZN8ACFK557 fits body-electronics hub modules that aggregate door switches, lighting drivers, and LIN sub-nodes. With 23 GPIOs and a 12-bit SAR ADC, the device can directly read switches and potentiometers while driving FETs via the FTM PWM channels. Its 2.7-5.5 V supply range supports 12 V battery systems with simple LDO regulation. The Cortex-M0+ runs LIN slave stacks under 2 KB of code, leaving headroom for diagnostics and bootloader logic. Its 24-QFN 4x4 mm footprint drops onto compact PCBAs behind vehicle headliners.
Được đề xuất
HVAC Blower Motor Controller
For HVAC blower modules, the S9KEAZN8ACFK557 generates the PWM control signals via its FTM and measures feedback through the 12-bit ADC. The 48 MHz core executes sensorless commutation algorithms for small BLDC fans, while the 8 KB flash stores the speed profile lookup tables. EMC immunity built into the KEA family withstands the noisy environment near brushed motors. The exposed thermal pad of the 24-QFN package wicks power losses into the PCB ground plane, eliminating external heatsinks in blower enclosures.
Được đề xuất
Seat Control Module
The S9KEAZN8ACFK557 drives seat-position memory functions, reading Hall-effect sensors via ADC and switching relays or H-bridges through GPIO. Its 1 KB SRAM stores seat-position calibration, and the on-chip watchdog detects software lockup for ASIL-aware systems. The 24-QFN footprint mounts onto seat-side PCBs where height clearance is critical. KEA's enhanced ESD rating protects against static discharge from passengers entering or exiting the vehicle.
Được đề xuất
Industrial Sensor Node
In industrial 4-20 mA loop-powered sensor nodes, the S9KEAZN8ACFK557 reads process variables through its ADC and transmits via UART or SPI. The Cortex-M0+ core executes linearization and HART-like protocol stacks within the 8 KB flash budget. The 2.7-5.5 V supply matches common 24 V loop-derived rails after a small LDO. The 24-QFN footprint mounts onto round PCBAs inside M12 connector heads, fitting standard field-instrument enclosures.
Được đề xuất
Small Appliance Control Board
The S9KEAZN8ACFK557 serves as the main controller in washing machine control boards, dishwasher interfaces, and refrigerator user panels. The KEA family passes IEC 60730 software-class B requirements, allowing the appliance to claim functional safety compliance. The Cortex-M0+ handles button-debounce, LED matrix driving, and relay sequencing within the 8 KB flash budget. The 24-QFN package enables single-sided PCB assembly to reduce manufacturing cost.
Được đề xuất
Smart Home Sensor Hub
For smart-home sensor hubs aggregating temperature, humidity, and occupancy inputs, the S9KEAZN8ACFK557 reads analog sensors and forwards data over UART or SPI to a host processor. The low-power Cortex-M0+ core plus flexible clock gating supports battery-powered deployments with multi-year coin-cell operation. The 24-QFN 4x4 mm package fits inside CR2032-powered sensor enclosures, and the wide operating temperature range supports outdoor and HVAC-duct installations.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho S9KEAZN8ACFK557 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | S9KEAZN8ACFK | S9KEAZN16ACFK | S9KEAZN8AMFK | S9KEAZN32ACFK | S9KEAZN64AMLK | MC9S08QD4CSC |
|---|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 24-QFN (4x4 mm) | 24-QFN (4x4 mm) - same | 24-QFN (4x4 mm) - same | 24-QFN (4x4 mm) - same | 24-QFN (4x4 mm) - same | 24-QFN (4x4 mm) - same | 24-QFN equivalent - same footprint |
| Core Architecture | ARM Cortex-M0+ 32-bit | ARM Cortex-M0+ 32-bit | ARM Cortex-M0+ 32-bit | ARM Cortex-M0+ 32-bit | ARM Cortex-M0+ 32-bit | ARM Cortex-M0+ 32-bit | HCS08 8-bit |
| Program Flash | 8 KB | 8 KB | 16 KB | 8 KB | 32 KB | 64 KB | 4 KB |
| RAM | 1 KB | 1 KB | 1 KB | 1 KB | 2 KB | 4 KB | 256 B |
| Maximum Clock | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 16 MHz |
| Supply Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 3.0 V to 5.5 V |
| Operating Temperature | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +85 C |
| Unit Price (qty 1) | $1.00 | $0.95 | $1.15 | $1.10 | $1.35 | $1.75 | $0.85 |
Bảo phân biệt quan trọng
- Smallest 8 KB flash variant in KEA 24-QFN family (vsS9KEAZN16ACFK)
- 32-bit Cortex-M0+ core vs 8-bit HCS08 (vsMC9S08QD4CSC)
- Automotive-grade EMC robustness built-in (vsS9KEAZN8AMFK)
Ghi chú thiết kế
Estimated: at 48 MHz active current draw with all peripherals enabled, the S9KEAZN8ACFK557 consumes roughly 8-12 mA from VDD. Place a 100 nF ceramic decoupling capacitor within 3 mm of each VDD/VSS pin pair, plus a single 4.7 uF bulk capacitor near the package. The exposed thermal pad (EP) MUST be soldered to a continuous ground copper pour to provide both thermal dissipation and the lowest-inductance return path for switching transients.
Estimated: keep ADC analog traces (VREFH, ADP0-ADP4) routed away from FTM PWM switching traces to minimize digital coupling. Use a guard trace tied to analog ground between the VREFH pin and adjacent digital pins. The 24-QFN 4x4 mm package has 0.5 mm pitch pads; use NSMD pads with a 0.275 mm solder mask opening for reliable reflow. Stencil apertures of 0.3 mm with 0.1 mm thickness produce consistent paste transfer on the small thermal pad.
Common mistake: forgetting to configure the RESET_b pin sharing with PTC4 in the SIM_SOPT register. If unused, this pin must be explicitly disabled as a reset source to free it as GPIO. Also: avoid leaving unused ADC inputs floating - tie them to VSSA or configure them as digital outputs to prevent shoot-through current in the analog mux. The watchdog timer must be enabled in software within the first 256 bus cycles after reset, or the part will reset itself.
Thông tin tuân thủ
Kinetis KEA family is AEC-Q100 qualified for automotive body applications. RoHS and REACH compliant per NXP product declaration. Halogen-free per IEC 61249-2-21.