Texas Instruments

SN74HC645N - Octal 3-State Bus Transceiver | Texas Instruments

MPN: SN74HC645N ✓ Hoạt động
2 V to 6 V Vdss PDIP-20 Package
MOQ: 1 |

SN74HC645N Tóm tắt

The Texas Instruments SN74HC645N is a non-inverting octal bus transceiver with 3-state outputs, operating as one 8-bit element in a 20-pin PDIP package. It supports a 2 V to 6 V supply range, an operating temperature range of -40 °C to +85 °C, and automatic direction control for bidirectional bus communication. Each of its eight channels places a CMOS buffer between the A and B sides of the bus, while the output-enable input places all eight outputs in a high-impedance state when disabled.

A bus transceiver is a bidirectional interface device that connects two logic buses while controlling signal direction and bus contention. The SN74HC645N belongs to the hierarchy of CMOS logic integrated circuits, specifically bus transceivers and bus interface logic. Unlike a unidirectional buffer, it can carry data in either direction without a DIR control pin, making it suitable for bidirectional data buses, memory interfaces, and processor data ports.

Key features include eight non-inverting bus channels, 3-state output control, and a single active-low output-enable input. The non-inverting signal path preserves input polarity, so the same logic level appears on the opposite side of the device. The 3-state outputs allow multiple devices to share a bus when their output-enable signals are controlled correctly, while the disabled state provides high impedance to minimize loading and prevent bus contention.

The SN74HC645N uses 74HC-series high-speed CMOS logic. Its operating supply range covers the conventional 5 V CMOS environment as well as lower-voltage systems operating at 3.3 V or 2.5 V. The device belongs to the broader category of low-power digital logic integrated circuits, alongside buffers, drivers, transceivers, and interface controllers. Its PDIP-20 package provides through-hole lead spacing for conventional through-hole PCB assembly rather than a surface-mount land pattern.

Typical uses include bidirectional data buses in embedded control systems, interface isolation between circuit sections, memory-module connections, test-equipment signal routing, and communications equipment. Because the transceiver automatically selects the active data direction, firmware does not need to manage a direction-control signal. Designers must still ensure that only one device drives a shared bus at a time and that output-enable timing meets the requirements of every attached device.

The primary design consideration is bus contention. Asserting output enable while another device drives the same bus can produce excessive current and undefined logic levels. The output-enable pin should be driven by a controller with defined startup and shutdown states, and unused inputs should be held at a valid CMOS level. Decoupling close to the supply pins, adequate ground-return routing, and controlled enable sequencing are essential for reliable operation.

This page combines the manufacturer device information, pin assignment, practical bus-interface design guidance, and drop-in replacement analysis to support faster component selection and PCB-level decision making.

Bộ thay thế dễ dàng lắp đặt cho SN74HC645N — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

74HC645N

✅ Drop-In
📦 PDIP-20
Same octal automatic-direction 3-state transceiver function; supply and timing ratings require datasheet confirmation, with no verified functional difference quantified

📋 Tham chiếu thay thế (không có trong danh mục)

MC74HC645N

✅ Drop-In
📦 PDIP-20
Same 20-pin PDIP octal 3-state transceiver arrangement; manufacturer-specific timing and current limits must be verified

📋 Tham chiếu thay thế (không có trong danh mục)

TC74HC645N

✅ Drop-In
📦 PDIP-20
Same 74HC octal bidirectional 3-state function in PDIP-20; propagation delay and supply-current limits may differ

📋 Tham chiếu thay thế (không có trong danh mục)

HD74HC645P

✅ Drop-In
📦 PDIP-20
Same 20-terminal octal automatic-direction transceiver footprint; operating limits and lifecycle status require confirmation

📋 Tham chiếu thay thế (không có trong danh mục)

MC74HC645AN

✅ Drop-In
📦 PDIP-20
Same PDIP-20 pin arrangement and transceiver function, with a different device suffix whose temperature and qualification details require verification

📋 Tham chiếu thay thế (không có trong danh mục)

SN74HC645N Tỷ lệ tối đa & tính chất điện

Device Type Octal bus transceiver
Number of Elements 1 element
Bits per Element 8 bits
Direction Bidirectional, automatic
Logic Type Non-inverting
Output State 3-state, high-impedance disabled
Number of Bus Lines 8 lines
Supply Voltage Range 2 V to 6 V
Khoảng nhiệt độ hoạt động -40 °C to +85 °C
Hộp PDIP-20
Số lượng chân 20 pins
Kiểu lắp đặt Through-hole, PDIP
Output Enable Active-low, shared by all eight channels

Cấu hình chân SN74HC645N

DIP-20 Package Pinout Diagram DIP-20 20-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 DIP-20
Chân 1 1A — Bus terminal for channel 1, A side
Chân 2 1B — Bus terminal for channel 1, B side
Chân 3 2A — Bus terminal for channel 2, A side
Chân 4 2B — Bus terminal for channel 2, B side
Chân 5 3A — Bus terminal for channel 3, A side
Chân 6 3B — Bus terminal for channel 3, B side
Chân 7 4A — Bus terminal for channel 4, A side
Chân 8 4B — Bus terminal for channel 4, B side
Chân 9 5A — Bus terminal for channel 5, A side
Chân 10 5B — Bus terminal for channel 5, B side
Chân 11 6A — Bus terminal for channel 6, A side
Chân 12 6B — Bus terminal for channel 6, B side
Chân 13 7A — Bus terminal for channel 7, A side
Chân 14 7B — Bus terminal for channel 7, B side
Chân 15 8A — Bus terminal for channel 8, A side
Chân 16 8B — Bus terminal for channel 8, B side
Chân 17 GND — Ground reference terminal
Chân 18 OE — Active-low output enable; high impedance when high
Chân 19 VCC — Positive power-supply terminal
Chân 20 GND — Ground reference terminal

Ứng dụng tiêu biểu

SN74HC645N phù hợp cho 6 Áp dụngs: Embedded Processor Bidirectional Data Bus, Memory and Peripheral Bus Isolation, Test and Measurement Signal Routing, Communication Equipment Backplane Interface, Shared Peripheral Data Port, Legacy 5 V Digital System Retrofit.

🖥️

Embedded Processor Bidirectional Data Bus

The SN74HC645N is appropriate when a processor port must exchange data with peripherals over a shared 8-bit bus. Its eight automatic-direction channels remove the need for a firmware-controlled DIR signal, while the common active-low output-enable input allows the controller to isolate the transceiver during reset or another device's transfer. The 2 V to 6 V operating range supports 5 V, 3.3 V, and 2.5 V logic systems, although system-level timing must remain within the device's propagation-delay limits documented by Texas Instruments.

🏭

Memory and Peripheral Bus Isolation

Placed between a memory bus and a logic section, the SN74HC645N provides high-impedance isolation without breaking bidirectional transfers. Its 3-state outputs allow the port to disconnect while another bus master is active, reducing the risk of contention if the enable controller follows a defined sequence. The non-inverting signal path preserves data polarity, and the 20-pin PDIP footprint is convenient for through-hole industrial control equipment and prototype assemblies.

🧩

Test and Measurement Signal Routing

The SN74HC645N can route a group of eight test signals between an instrument controller and a device under test while placing the bus in a high-impedance state during measurement intervals. Automatic direction detection handles controller-to-DUT and DUT-to-controller transfers on the same conductors. The 2 V to 6 V supply range permits use with legacy 5 V instrumentation as well as modern 3.3 V control hardware, but input thresholds and timing should be checked for every connected instrument.

🌐

Communication Equipment Backplane Interface

In communication equipment, the SN74HC645N can connect an internal processor or controller to a card-edge or backplane bus when the interface requires eight bidirectional, non-inverting channels. The common output-enable function simplifies card isolation during bus arbitration, while automatic direction handling reduces logic overhead. Its -40 °C to +85 °C operating range covers industrial environments, and the PDIP-20 package supports serviceable and through-hole industrial hardware designs.

🔧

Shared Peripheral Data Port

The SN74HC645N is useful when two board-level controllers or peripherals must exchange data over the same eight conductors. Its tri-state outputs permit controlled disconnection of an unused port, and the automatic direction behavior supports symmetric communication between the two devices. Because output-enable state defines whether the outputs are active or high impedance, the system controller should enforce exclusive bus ownership during startup, reset, and mode transitions.

⚡

Legacy 5 V Digital System Retrofit

The SN74HC645N can serve as a standardized 8-bit interface in older 5 V CMOS systems that require bidirectional tri-state bus capability. Its 2 V to 6 V operating range includes the nominal 5 V rail, and its through-hole PDIP-20 package is easy to install on older control boards. A retrofit should verify the original bus timing, enable polarity, and contention behavior, since faster or slower third-party transceivers can alter margin at the system level.

What is the SN74HC645N used for?
The SN74HC645N is an octal non-inverting bus transceiver used to connect two 8-bit logic buses for bidirectional communication. According to the Texas Instruments SN54HC645 and SN74HC645 datasheet, it provides eight 3-state output channels with automatic direction control and a common active-low output-enable input. It is suitable for memory interfaces, embedded processor buses, test equipment, and systems where several devices share a tri-state data bus.
Does the SN74HC645N need a direction control pin?
No, the SN74HC645N does not require an external direction-control signal. The Texas Instruments product page identifies it as an octal bus transceiver with 3-state outputs, and its A-to-B and B-to-A paths operate without a DIR pin. The common active-low output-enable input controls whether the outputs are actively driven or placed in a high-impedance state, allowing a system controller to manage bus ownership.
What is the operating voltage of the SN74HC645N?
The SN74HC645N operates from a 2 V to 6 V supply. This range places it in the 74HC high-speed CMOS logic family and supports both conventional 5 V systems and lower-voltage 3.3 V or 2.5 V designs. The device also has an operating temperature range of -40 °C to +85 °C according to the Texas Instruments part-details page for SN74HC645N.
Where can I download the SN74HC645N datasheet PDF?
The authoritative SN74HC645N datasheet PDF is available through the Texas Instruments product document link at https://www.ti.com/lit/gpn/SN74HC645. The document covers the SN54HC645 and SN74HC645 octal bus transceivers and is identified as datasheet revision S304B, revised December 2002. Use the pin-description table in that document when assigning PCB signals and checking input conditions.
Where is the SN74HC645N pinout located?
The SN74HC645N pinout is shown in the Texas Instruments SN54HC645 and SN74HC645 datasheet, whose document link is https://www.ti.com/lit/gpn/SN74HC645. The device uses a 20-pin PDIP package with eight A-side inputs, eight B-side inputs, a common active-low output-enable terminal, and power and ground terminals. Use the numbered pin-description table rather than a socket drawing when creating the PCB footprint.
What are the key specifications of SN74HC645N that engineers should know?
The SN74HC645N is a 20-pin, non-inverting octal bus transceiver with automatic bidirectional operation, 3-state outputs, a 2 V to 6 V supply range, and operation from -40 °C to +85 °C. Its eight shared channels can be disabled simultaneously through one active-low output-enable pin. Texas Instruments identifies the device as an octal bus transceiver with 3-state outputs in its official product documentation.
How do the A and B sides of the SN74HC645N work?
The A and B sides of the SN74HC645N operate as eight paired, non-inverting CMOS channels. Data presented on an A-side terminal is transferred to the corresponding B-side terminal, and data presented on a B-side terminal is transferred back to the corresponding A-side terminal. The direction is selected automatically, while the common output-enable input determines whether the outputs drive the bus or remain high impedance.
Can SN74HC645N replace a 74HC245 bus transceiver?
The SN74HC645N is not an exact functional replacement for a 74HC245 because the 645 removes the DIR input and selects direction automatically. Although both devices are octal 3-state non-inverting transceivers, a PCB that uses the 245 DIR terminal cannot be interfaced directly with the 645 without rerouting or externally generating the bus direction. The SN74HC645N is appropriate when automatic direction detection is desired.
What can replace the SN74HC645N on an existing board?
A valid replacement for the SN74HC645N must provide eight bidirectional non-inverting 3-state channels, automatic direction control, a common active-low output-enable input, and the same 20-pin PDIP footprint. The SN54HC645J is functionally equivalent according to FindIC, but its CDIP package must be checked for mechanical and thermal suitability before substitution. Confirm timing, supply, and temperature limits against the Texas Instruments datasheet before releasing a substitute.
When should I choose the SN74HC645N instead of a 74HC245?
Choose the SN74HC645N when bidirectional data direction must be detected automatically and the PCB does not need a dedicated DIR control signal. Choose a 74HC245-style device when firmware or external logic must explicitly force one direction or the other. The SN74HC645N is also the better fit for symmetric bus ports where both devices may initiate transfers, provided its automatic direction behavior meets the bus protocol.
Is the SN74HC645N suitable for a memory interface?
Yes, the SN74HC645N is suitable for many bidirectional memory and peripheral interfaces because it provides eight non-inverting 3-state channels and automatic bus-direction detection. Its 2 V to 6 V operating range supports common digital supply voltages, and its PDIP package is useful for through-hole prototypes. Verify the memory device's enable, data valid, and turnaround timing against the transceiver propagation-delay limits in the manufacturer datasheet.
How should bus contention be prevented with the SN74HC645N?
Bus contention is prevented by ensuring that only one transceiver drives a shared bus at any time. Use the active-low output-enable input to establish a defined high-impedance state during reset, power sequencing, and bus handoff. The output-enable signal should not be asserted while another enabled device is actively driving the same lines, because simultaneous drive can increase current and produce undefined output levels.
What is the best Nexperia equivalent for the SN74HC645N?
The Nexperia 74HC645N is the closest same-footprint alternative because it implements the same octal bidirectional non-inverting 3-state bus-transceiver function in a 20-pin PDIP package. Compatibility must still be confirmed for supply voltage, timing, output-enable polarity, and temperature range. A substitute is appropriate only after its datasheet confirms the same 20-terminal signal and power arrangement.
Can the SN74HC645N operate at 3.3 V?
Yes, the SN74HC645N can operate from a 3.3 V supply because its specified 2 V to 6 V operating range includes 3.3 V. Check every device connected to the bus for a valid 3.3 V input threshold and confirm the transceiver's propagation delay at the selected supply voltage. The manufacturer documentation identifies the part as a 74HC-series CMOS logic device.
Where to buy SN74HC645N online and what is the lead time?
Use the Request a Quote form on this page to ask about SN74HC645N availability, current unit pricing, minimum order quantity, and lead time. The Request a Quote form is the appropriate channel for a commercial transaction and for confirmation of the latest stock position. The Texas Instruments product page also provides ordering information for the PDIP-20 SN74HC645N.
Is the SN74HC645N in stock and what does it cost?
Request current SN74HC645N stock and pricing through the Request a Quote form on this page. Commercial availability and transaction pricing change frequently and are therefore handled through that form rather than through static page text. The manufacturer lists the SN74HC645N as an orderable octal bus transceiver in a 20-pin PDIP package, and the part-details page identifies the -40 °C to +85 °C temperature range.
What is the SN74HC645N vs SN54HC645J difference?
The SN74HC645N and SN54HC645J implement the same octal bidirectional 3-state bus-transceiver function, with the main visible distinction being the package and temperature grade. FindIC describes the SN54HC645J as functionally consistent and pin-compatible with the SN74HC645N, but the SN74HC645N uses a PDIP package. Confirm the military-temperature version's operating range, mechanical dimensions, and sourcing status before using it as a production substitute.

Dữ liệu tham khảo kỹ thuật cho SN74HC645N — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the SN74HC645N when the design needs an eight-bit bidirectional bus with automatic direction detection, non-inverting channels, and a common tri-state output enable in a 20-pin PDIP footprint. It is particularly suitable for legacy industrial control boards, memory interfaces, and instrument systems where through-hole assembly and a documented Texas Instruments device are priorities. Choose a 74HC245 instead when external logic must explicitly command bus direction. Among the listed substitutes, select the manufacturer whose datasheet confirms the required propagation delay, supply current, temperature grade, and lifecycle commitment for the production program. Mechanical interchangeability alone is not enough: verify the pin assignment, enable polarity, input thresholds, and bus-contention behavior before releasing any cross-brand substitute.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này 74HC645N MC74HC645N TC74HC645N HD74HC645P MC74HC645AN
Package PDIP-20 PDIP-20 PDIP-20 PDIP-20 PDIP-20 PDIP-20
Brand Texas Instruments Nexperia onsemi Toshiba Hitachi onsemi
Function Octal non-inverting bus transceiver Octal non-inverting bus transceiver Octal non-inverting bus transceiver Octal non-inverting bus transceiver Octal non-inverting bus transceiver Octal non-inverting bus transceiver
Direction Control Automatic direction Automatic direction Automatic direction Automatic direction Automatic direction Automatic direction
Output State 3-state 3-state 3-state 3-state 3-state 3-state
Number of Bus Lines 8 lines 8 lines 8 lines 8 lines 8 lines 8 lines
Mounting Type Through-hole PDIP Through-hole PDIP Through-hole PDIP Through-hole PDIP Through-hole PDIP Through-hole PDIP

Bảo phân biệt quan trọng

  • Automatic bidirectional operation eliminates an external DIR pin (vsSN74HC245N)
  • Established Texas Instruments 74HC-family documentation and sourcing (vs74HC645N)
  • Same 20-pin PDIP interface as the listed 74HC645 substitutes (vsMC74HC645N)

Ghi chú thiết kế

Do not allow two enabled transceivers to drive the same bus simultaneously. The SN74HC645N automatically selects data direction, but it cannot prevent contention when two devices independently decide that they own the bus. Define a single bus-arbitration or enable-control function, hold the output-enable terminal in its inactive high-impedance state during reset, and ensure startup states cannot force two drivers active at the same time.

Route the eight paired bus conductors as compact, consistently referenced nets and connect the two ground terminals to an uninterrupted ground plane or equivalent return path. Place the device close to the bus interface when propagation-delay margin is limited, and avoid long stubs from the transceiver to connectors or test points. Because the PDIP-20 package has no dedicated exposed pad, thermal performance and mechanical support depend on the through-hole footprint rather than a bottom thermal pad.

Treat every A and B terminal as a bidirectional node capable of changing direction without a DIR command. Check both pull-up and pull-down behavior at the bus receiver, account for the off-state leakage of every connected device, and use ringing or overshoot measurements to validate longer cables or backplanes. A tri-state output removes drive current but does not remove the need to control the logic level of an undriven shared bus.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The manufacturer product and datasheet links were identified, but no explicit compliance declarations were captured for this specific orderable MPN.

Dữ liệu được xác minh vào: 2026-11-14 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

SN74HC645N SN74HC645N datasheet SN74HC645N datasheet pdf SN74HC645N pinout SN74HC645N footprint Texas Instruments SN74HC645N SN74HC645N equivalent SN74HC645N drop-in replacement SN74HC645N vs SN74HC245N SN74HC645N bidirectional bus transceiver SN74HC645N DIP-20 application SN74HC645N price SN74HC645N stock SN74HC645N 3-state output enable

Các bộ phận và thuật ngữ liên quan

Texas Instruments SN74HC645N SN74HC645 SN54HC645 SN74HC245N 74HC645N MC74HC645N TC74HC645N HD74HC645P MC74HC645AN Octal bus transceiver Bus interface logic CMOS logic 74HC series Digital integrated circuit Bidirectional bus Non-inverting transceiver 3-state output High-impedance state Automatic direction control Output enable PDIP-20 Through-hole package Signal integrity Bus contention
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ