Texas Instruments

SN74LS697N - 4-Bit Synchronous Up/Down Counter | Texas Instruments

MPN: SN74LS697N ✓ Hoạt động
PDIP-20 Package Positive edge Speed
MOQ: 1 |

SN74LS697N Tóm tắt

The Texas Instruments SN74LS697N is a synchronous 4-bit up/down binary counter with output registers and multiplexed three-state outputs, packaged in a 20-pin PDIP. It combines counting, registered output storage, and bus-oriented output control in one logic device. The device increments or decrements on the active edge of the clock input, supports a 0°C to 70°C operating-temperature grade, and is intended for digital counting and timing systems.

A synchronous binary counter is a sequential logic device whose internal state changes in step with an active clock edge. The SN74LS697 belongs to the broader 74LS TTL logic family and combines a counter element with parallel output registers. Its up/down control permits operation as an incrementing counter, decrementing counter, or programmable frequency-divider stage. The output-register stage separates the counting sequence from the signals presented at the multiplexed outputs.

The principal features include one 4-bit counting element, a positive-edge clock input, directional counting control, registered outputs, and three-state output capability. The three-state outputs allow multiple counters or other bus-driving devices to share a common data bus when output-enable control is active. This combination is useful in systems requiring orderly bus access, event sequencing, or synchronized transfer of counter values.

The SN74LS697N is a member of the SN74LS logic series and uses the SN74LS697 function designation. Its registered outputs provide a defined output state between active clock events, while the synchronous counting architecture simplifies designs where multiple counting stages must update in step. When cascading devices, the carry output can be used to extend counting range and coordinate event boundaries.

Typical applications include frequency division, pulse and event counting, programmable timing modules, digital test equipment, industrial sequence controllers, and bus-oriented digital subsystems. The device can also serve as the central counting element in measurement systems that must divide an input frequency, count fixed-duration events, or present a latched hexadecimal or binary count to a host processor.

Designers should use the pin-description table in the Texas Instruments SN74LS697 datasheet when assigning PCB signals, especially for output-enable and directional-control pins. Because the outputs are multiplexed and three-state capable, the system must keep output-enable and bus-control timing separate from the clock edge requirements. Unused inputs should be held at a defined logic level according to the datasheet guidance.

This page combines the Texas Instruments function description, package information, application guidance, sourcing questions, and replacement constraints into a practical engineering reference for the SN74LS697N. It also distinguishes a verified function-compatible ordering suffix from a genuine cross-manufacturer drop-in equivalent, helping designers avoid assuming that similar counter ICs are pin-compatible without reviewing their datasheets.

Bộ thay thế dễ dàng lắp đặt cho SN74LS697N — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.

Yêu cầu các bộ thay thế

SN74LS697N Tỷ lệ tối đa & tính chất điện

Logic Type Synchronous 4-bit binary up/down counter
Counting Element 1 counter element
Counter Width 4 bits
Clock Edge Positive edge
Output Features Registered outputs with multiplexed three-state outputs
Hộp PDIP-20
Số chân 20 pins
Khoảng nhiệt độ hoạt động 0°C to 70°C
Logic Family SN74LS
Kiểu lắp đặt Through-hole

Hướng dẫn cấu hình chân SN74LS697N pdip-20

Cấu hình chân cho SN74LS697N (pdip-20 gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân pdip-20 cho SN74LS697N

Không có dữ liệu chân cụ thể sẵn có cho SN74LS697N.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

SN74LS697N phù hợp cho 6 Áp dụngs: Frequency Divider, Event and Pulse Counting, Programmable Timing Module, Digital Test Equipment, Industrial Sequence Control, Bus-Controlled Counter Interface.

⚡

Frequency Divider

The SN74LS697N is well suited to programmable frequency division because it combines a 4-bit synchronous counter with a registered output stage and a carry output for cascading. A fixed count interval can be selected through the counter controls, while the active-edge clocking keeps the count state predictable relative to the input waveform. Its three-state outputs are useful when the divided signal must be routed onto a shared bus without permanent driver contention. Designers should set the direction and enable levels according to the Texas Instruments SN74LS697 datasheet and verify timing margins at the intended input frequency.

🏭

Event and Pulse Counting

The SN74LS697N can count discrete events arriving as a clock signal and retain the resulting count for later processing. Its 4-bit count capacity covers 0 through 15 states, while the carry output provides a natural boundary indication or a means to cascade another stage for a larger range. Registered outputs add a defined sampling point to the interface logic. For accurate pulse counting, the source must meet the clock setup and hold requirements stated in the Texas Instruments SN74LS697 datasheet, and the counter must remain enabled during the complete event sequence.

⏱️

Programmable Timing Module

The SN74LS697N provides the counting and output-storage functions required for a programmable timing module. The external clock establishes the time base, the up/down control selects the counting direction, and the registered outputs hold a stable count value for downstream control logic. The carry output can mark rollover or drive an additional counting stage when a longer interval is needed. Because this is a synchronous design, clock-edge behavior and input timing are central to accurate timing; engineers should review the timing diagrams and output-control sequences in the Texas Instruments SN74LS697 datasheet.

🖥️

Digital Test Equipment

The SN74LS697N can act as a programmable sequence and count element in digital test equipment where repeated input pulses must be divided, counted, and made available to a control section. Its three-state multiplexed outputs allow the instrument bus to share the counter outputs with other peripheral devices under coordinated output-enable control. The registered outputs provide a stable interface value between clock events. Test-system designers should account for propagation delay, clock tolerance, and bus contention margins using the timing information in the Texas Instruments SN74LS697 datasheet.

🏭

Industrial Sequence Control

The SN74LS697N fits industrial sequence-control tasks that require repeatable counting, directional operation, and a latched count output. A controller can use the count to select a machine step, trigger an actuator sequence, or divide a production-cycle pulse train. The 0°C to 70°C operating range covers commercial and industrial environments where appropriate enclosure temperature control is maintained. Designers should define all control inputs during reset and power transitions, and use the manufacturer's input-level and timing requirements to prevent unintended count increments.

🌐

Bus-Controlled Counter Interface

The SN74LS697N supports bus-oriented counter interfaces because its outputs are registered and can be placed in a high-impedance state. A host or system controller can enable the counter outputs at a defined bus interval and read the current 4-bit value without tying the data bus continuously to the device. The design must ensure that enable and disable timing does not overlap with another bus driver. Because the SN74LS697N combines counting and multiplexing, engineers should validate both the counter-clock timing and bus ownership sequence using the Texas Instruments SN74LS697 datasheet.

Tóm tắt các sản phẩm được đề xuất

SN74LS697N Texas Instruments Được sử dụng trong: Frequency Divider, Event and Pulse Counting, Programmable Timing Module, Digital Test Equipment, Industrial Sequence Control, Bus-Controlled Counter Interface SN74LS181N Adjacent counter family for evaluation Được sử dụng trong: Frequency Divider, Programmable Timing Module, Industrial Sequence Control SN74LS593N Adjacent counter and shift-register logic for system evaluation Được sử dụng trong: Event and Pulse Counting, Digital Test Equipment, Bus-Controlled Counter Interface
What is the SN74LS697N?
The SN74LS697N is a Texas Instruments synchronous 4-bit up/down binary counter with registered outputs and multiplexed three-state outputs. It is housed in a 20-pin PDIP package and operates from 0°C to 70°C. According to the Texas Instruments SN74LS697 datasheet, the device counts upward or downward on the active clock edge, allowing it to serve as a counter, frequency divider, or programmable timing element.
What are the key specifications of SN74LS697N that engineers should know?
The SN74LS697N provides one 4-bit counting element, positive-edge triggering, up/down counting, registered outputs, and multiplexed three-state outputs in a 20-pin PDIP. According to the Texas Instruments SN74LS697 datasheet, its 0°C to 70°C temperature range suits commercial and industrial equipment. The three-state output capability permits controlled sharing of a data bus when output-enable timing is managed correctly.
Where can I download the SN74LS697N datasheet PDF?
The official SN74LS697N datasheet is available through Texas Instruments at https://www.ti.com/lit/gpn/sn74ls697. The manufacturer datasheet is the preferred document for the complete pin-description table, recommended operating conditions, timing diagrams, and package information. Engineers should use the pin-description table when assigning PCB tracks and the timing diagrams when checking clock, load, and output-enable interactions.
Where can I find the SN74LS697N pinout?
The SN74LS697N pinout is documented in the pin-description table of the Texas Instruments SN74LS697 datasheet. The device uses a 20-pin PDIP package, with the standard pin-1 orientation indicated by the package diagram. Use that table to identify the clock, count-direction, enable, carry, data, and three-state control functions; do not infer assignments from a similarly named counter from another family.
Can SN74LS697N count both upward and downward?
Yes, the SN74LS697N supports both upward and downward synchronous counting through its direction-control input. According to the Texas Instruments SN74LS697 datasheet, the counter state changes on the active edge of the clock when the counting direction is stable. The design therefore requires the direction signal to meet the same setup-and-hold timing expectations as the other synchronous inputs.
How does the three-state output function help the SN74LS697N?
The SN74LS697N can place its multiplexed outputs into a high-impedance state so multiple devices can share a bus without continuous output contention. According to the Texas Instruments SN74LS697 datasheet, output-enable control coordinates when the registered count is presented externally. The bus controller must keep output-enable timing compatible with the receiving logic and must not enable two unrelated drivers simultaneously.
Where to buy SN74LS697N online?
Use the Request a Quote form on this page to request SN74LS697N availability, order quantities, and current commercial terms. The exact suffix identifies the 20-pin PDIP device, so the quote should state SN74LS697N clearly. Texas Instruments lists the SN74LS697 family on its official product page, and current channel availability can change without notice.
What is the price of SN74LS697N?
Current SN74LS697N commercial terms are shown through the Request a Quote form on this page rather than as a static price. The requested quantity, packaging requirement, and delivery schedule determine the quotation. The part number identifies the exact 20-pin PDIP ordering option, allowing the request to be evaluated without ambiguity.
What is the lead time for SN74LS697N?
Use the Request a Quote form on this page to request the current SN74LS697N lead time for the quantity you need. Lead time can depend on available inventory, manufacturing status, package quantity, and delivery terms. The manufacturer product page is the appropriate source for confirming the family status and ordering information.
Is SN74LS697N in stock?
Current SN74LS697N stock should be confirmed through the Request a Quote form on this page. The request should include your required quantity and acceptable packaging format so the response reflects the intended order. Because availability can change, a confirmed allocation is more useful than treating a catalog listing as a permanent stock guarantee.
What is the best drop-in replacement for SN74LS697N?
The SN74LS697NE4 is the closest verified same-manufacturer ordering option for the SN74LS697N because it retains the SN74LS697 function and 20-pin PDIP configuration, but it is an ordering-suffix variation rather than a distinct cross-brand upgrade. According to Texas Instruments ordering information, engineers should compare the suffix-specific ordering table and marking details before treating the two as interchangeable.
SN74LS697N vs SN74LS697NE4 - which is better?
The SN74LS697N and SN74LS697NE4 implement the same SN74LS697 counter function in a 20-pin PDIP, so the deciding issue is the exact ordering suffix rather than a different counter architecture. The SN74LS697N is the standard N-package ordering identifier. According to Texas Instruments product information, check the suffix-specific orderable table for any marking, procurement, or commercial differences.
When should I choose SN74LS697N over another 4-bit counter?
Choose the SN74LS697N when the design needs a 4-bit synchronous up/down counter with a registered output stage and multiplexed three-state outputs. A plain binary counter without registered or tri-state outputs may be simpler if only counting is required. The Texas Instruments SN74LS697 datasheet should be reviewed for timing, control polarity, supply requirements, and output behavior before finalizing the selection.
Is SN74LS697N suitable for frequency division and timing circuits?
The SN74LS697N is suitable for frequency division and timing applications because it provides synchronous up/down counting, a carry function for cascading, and registered outputs for downstream systems. The Texas Instruments SN74LS697 datasheet identifies the device as a binary up/down counter with output registers. Its usefulness in timing systems depends on the clock frequency, setup time, propagation delay, and output-load requirements.
What is the best cross-brand equivalent for SN74LS697N?
No cross-brand, pin-to-pin SN74LS697N equivalent has been confirmed for this page, so engineers should not assume that another manufacturer's similarly named counter has the same 20-pin assignments. The required cross-reference must match the 4-bit synchronous up/down function, registered outputs, three-state multiplexing, control polarity, and timing characteristics. Use the Texas Instruments datasheet as the electrical and pinout baseline during any qualification.

Dữ liệu tham khảo kỹ thuật cho SN74LS697N — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the SN74LS697N when the circuit requires a 4-bit synchronous up/down counter, registered outputs, and multiplexed three-state operation. It is particularly useful for frequency division, programmable timing, event counting, and bus-controlled interfaces where a stable count value and controlled output enable are important. SN74LS181N may be considered for a simpler conventional binary-counter function, while SN74LS593N may fit architectures centered on combined counter and shift-register behavior. Neither comparison is automatically a drop-in replacement: verify pin assignments, count direction, clock edge, carry behavior, output-enable polarity, and timing. No cross-manufacturer equivalent is presented because a verified 20-pin, pin-to-pin match has not been established.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này
Brand Texas Instruments
Package PDIP-20
Function Synchronous 4-bit up/down binary counter
Counter Elements 1
Counting Width 4 bits
Clock Edge Positive edge
Output Architecture Registered outputs with multiplexed three-state outputs
Operating Temperature 0°C to 70°C
Mounting Type Through-hole
Logic Family SN74LS

Bảo phân biệt quan trọng

  • Counter and registered-output functions are combined in one device (vsSN74LS593N)
  • Directional counting is built into the counter element (vsSN74LS181N)
  • Output-register stage supports controlled bus sharing (vsSN74LS593N)

Ghi chú thiết kế

Treat the clock, direction, enable, and output-enable signals as synchronous control inputs. The direction and enable levels must be stable for the setup-and-hold interval specified in the Texas Instruments SN74LS697 datasheet. Avoid routing the clock directly beside multiplexed output signals when a clock transition could couple into an output during a bus-switching interval. Use a ground plane and short point-to-point clock traces to reduce susceptibility to noise-induced count errors.

Assign PCB connections from the manufacturer's 20-pin PDIP pin-description table rather than from a generic counter diagram. Keep the three-state output paths away from clock and control traces, and maintain a continuous ground reference beneath the device where the board layout permits. Because several outputs are multiplexed, their physical order can affect routing efficiency; planning the bus direction before placing the IC reduces crossings and makes output-enable routing easier to inspect.

Do not enable the three-state outputs while another device drives the same bus. Confirm the output-enable polarity and required setup timing from the Texas Instruments SN74LS697 datasheet, and do not assume that a high-impedance output preserves the previous data level at the receiver. Also avoid changing the counting direction close to a clock edge, because setup-and-hold violations can cause an incorrect count state even though the circuit appears static when troubleshooting.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The device is a commercial-temperature 0°C to 70°C logic IC; automotive qualification is not indicated. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statuses require confirmation from the current manufacturer documentation.

Dữ liệu được xác minh vào: 2026-11-19 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

SN74LS697N datasheet SN74LS697N datasheet pdf SN74LS697N pinout SN74LS697N PDIP-20 SN74LS697N equivalent SN74LS697N replacement SN74LS697N drop-in replacement SN74LS697N price SN74LS697N stock Texas Instruments SN74LS697N SN74LS697N frequency divider SN74LS697N vs SN74LS697NE4

Các bộ phận và thuật ngữ liên quan

Texas Instruments SN74LS697N SN74LS697 SN74LS697NE4 SN74LS181N SN74LS593N 4-bit binary counter up/down counter synchronous counter logic IC 74LS TTL logic family counter register registered output multiplexed output three-state output positive-edge clock PDIP-20 through-hole package frequency division event counting programmable timing carry output bus interface industrial sequence control
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ