STM32H747IIT6 - 480MHz Dual-Core MCU | STMicroelectronics
MPN: STM32H747IIT6 ✓ Hoạt độngSTM32H747IIT6 Tóm tắt
A dual-core microcontroller is an integrated circuit containing two processor cores that can execute software concurrently or divide workloads between high-performance and real-time tasks. Within the product hierarchy, the STM32H747IIT6 belongs to the STM32H7 high-performance microcontroller family, combining Cortex-M7 and Cortex-M4 processing capabilities with extensive connectivity, analog, security, and real-time peripherals.
Principal features include simultaneous operation of the 480 MHz Cortex-M7 and 240 MHz Cortex-M4 cores, 2 MB of flash, 1 MB of RAM, 12-bit and 16-bit converters, and a 176-pin LQFP-176 package. The dual-core architecture allows the M7 core to manage demanding control loops, graphics, or signal processing while the M4 core handles peripheral control, communications, or safety monitoring, reducing the need for an additional discrete controller.
The STM32H747 device family is based on STMicroelectronics high-performance microcontroller technology and provides a large peripheral set for demanding embedded systems. Its operating-voltage range supports conventional embedded rails, while the split-core architecture allows independent code execution without duplicating the external package and power infrastructure. Firmware developers can also use the ST application-note workflow for migrating compatible STM32F7 designs to the STM32H743/H753 line when package compatibility is confirmed in the selected device.
Typical uses include industrial automation controllers, high-end audio and DSP equipment, networked embedded gateways, motor-control systems, medical monitoring equipment, and human-machine interfaces. The 176-pin package exposes a broad selection of communication and general-purpose I/O, making it suitable for designs that need both processing performance and extensive peripheral connectivity.
Design the power rails so that the 1.62 V to 3.6 V operating range, decoupling requirements, and internal regulator configuration are respected before applying external signals. The LQFP-176 footprint is large relative to smaller MCU packages, so its 0.5 mm lead pitch requires careful inspection during PCB assembly and rework.
Bộ thay thế dễ dàng lắp đặt cho STM32H747IIT6 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với STM32H747IIT6 (cùng hình factor và footprint) — khác nhau ở Package, Communication Interfaces, ADC, Core Architecture, DAC.
STM32H743IIT6
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →STM32H753IIT6
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →STM32H745IIT6
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →STM32H742IIT6
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
STM32H752IIT6
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
STM32H747IIT6 Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit dual-core microcontroller |
| Main Processor | Arm Cortex-M7 |
| Main Processor Maximum Frequency | 480 MHz |
| Co-Processor | Arm Cortex-M4 |
| Co-Processor Maximum Frequency | 240 MHz |
| Architecture | 32-bit RISC |
| Internal Flash | 2 MB (2M x 8) |
| RAM | 1 MB |
| Điện áp cung cấp hoạt động | 1.62 V to 3.6 V |
| Khoảng nhiệt độ hoạt động | -40°C to +85°C |
| ADC Resolution | 12-bit |
| Timer Resolution | 16-bit |
| Hộp | 176-pin LQFP (24 x 24 mm) |
| Số chân | 176 pins |
| Kiểu lắp đặt | Surface mount |
| Trạng thái RoHS | RoHS compliant |
| Supply Configuration | 1.8 V, 2.5 V, 3.3 V |
| Core Configuration | Dual-core Cortex-M7 and Cortex-M4 |
Hướng dẫn cấu hình chân STM32H747IIT6 176-pin lqfp (24 x 24 mm)
Cấu hình chân cho STM32H747IIT6 (176-pin lqfp (24 x 24 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho STM32H747IIT6.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
STM32H747IIT6 phù hợp cho 6 Áp dụngs: Industrial Automation and Motion Controllers, High-End Audio and DSP Equipment, Connected Industrial IoT Gateways, Motor Drive and Real-Time Control, Medical Monitoring and Diagnostic Equipment, Human-Machine Interfaces and Data Acquisition.
Industrial Automation and Motion Controllers
The STM32H747IIT6 fits industrial automation controllers that must combine high-rate control math with responsive peripheral servicing. Its 480 MHz Cortex-M7 core can execute motion algorithms, while the 240 MHz Cortex-M4 core can handle communications and peripheral interrupts. The 2 MB flash and 1 MB RAM support a layered firmware architecture without an external controller. The 176-pin LQFP provides extensive I/O options, although industrial temperature, isolation, and surge requirements must be verified at the system level.
Được đề xuất
High-End Audio and DSP Equipment
The STM32H747IIT6 is appropriate for audio and DSP products that need sustained computational throughput without adding a separate real-time processor. The 480 MHz Cortex-M7 core handles filters, mixing, or control algorithms, while the Cortex-M4 core can maintain peripheral and interface servicing. Its 1 MB of RAM provides space for working buffers, and the 2 MB flash stores firmware and coefficient data. Signal-chain performance still depends on converter selection, analog layout, clocking, and memory-bandwidth requirements.
Được đề xuất
Connected Industrial IoT Gateways
The STM32H747IIT6 can serve as the control processor in a connected industrial gateway that combines protocol handling with local real-time control. The Cortex-M7 core can manage Ethernet or high-bandwidth data paths, while the Cortex-M4 core maintains lower-priority device communication or monitoring tasks. A 176-pin package allows numerous digital, serial, and analog connections, and the 1 MB RAM supports buffering. The design must still provide appropriate network isolation, power conversion, surge protection, and antenna integration.
Được đề xuất
Motor Drive and Real-Time Control
The STM32H747IIT6 is suitable for sophisticated motor-drive controllers that need a fast main core and an independent real-time execution path. The 480 MHz Cortex-M7 core can execute current-loop and observer algorithms, while the 240 MHz Cortex-M4 core can handle pulse-related servicing or supervisory functions. The device's 12-bit converter supports motor-control feedback channels, while the 176-pin package provides ample I/O for encoders, gate drivers, and protection signals. External power-stage isolation and safety mechanisms remain system-level requirements.
Được đề xuất
Medical Monitoring and Diagnostic Equipment
The STM32H747IIT6 can support medical monitoring and diagnostic equipment where signal processing, display control, and communications must coexist. Its 480 MHz Cortex-M7 core handles acquisition and analysis workloads, while the Cortex-M4 core can supervise sensors and service external interfaces. The 12-bit ADC resolution and 1 MB of RAM help support local data handling. Medical designs must add the required patient-safety isolation, validation, documentation, and risk-control processes; these are system compliance obligations rather than MCU certifications.
Được đề xuất
Human-Machine Interfaces and Data Acquisition
The STM32H747IIT6 fits human-machine interfaces and data-acquisition equipment that need responsive control plus substantial connectivity. The Cortex-M7 core can process graphics commands, filter acquired data, or execute application logic, while the Cortex-M4 core manages button, touch, or peripheral updates. The broad 176-pin package simplifies access to displays, external memory, analog inputs, and communications. Display timing and external interface bandwidth should be validated with the selected peripheral set rather than inferred from processor clock frequency alone.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho STM32H747IIT6 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | STM32H743IIT6 | STM32H753IIT6 | STM32H745IIT6 | STM32H742IIT6 | STM32H752IIT6 |
|---|---|---|---|---|---|---|
| Package | LQFP-176 (24 x 24 mm) | LQFP-176 (24 x 24 mm) | LQFP-176 (24 x 24 mm) | LQFP-176 (24 x 24 mm) | LQFP-176 (24 x 24 mm) | LQFP-176 (24 x 24 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Primary Core | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 |
| Primary Core Maximum Frequency | 480 MHz | 480 MHz | 480 MHz | 480 MHz | 480 MHz | 480 MHz |
| Secondary Core | 240 MHz Arm Cortex-M4 | No Cortex-M4 companion core | Dual-core configuration with a different task split | Different companion-core device configuration | No Cortex-M4 companion core | Different companion-core configuration |
| Internal Flash | 2 MB (2M x 8) | 2 MB | 2 MB | 2 MB | 2 MB | 2 MB |
| RAM | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB |
| ADC Resolution | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit |
| Operating Supply Voltage | 1.62 V to 3.6 V | 1.62 V to 3.6 V | 1.62 V to 3.6 V | 1.62 V to 3.6 V | 1.62 V to 3.6 V | 1.62 V to 3.6 V |
| Operating Temperature Range | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C |
Bảo phân biệt quan trọng
- Simultaneous Cortex-M7 and Cortex-M4 execution in one package (vsSTM32H743IIT6)
- Substantial on-chip memory for complex firmware (vsSTM32H752IIT6)
- Broad 176-pin LQFP integration (vsSTM32H745IIT6)
- Wide operating-voltage range for embedded systems (vsSTM32H742IIT6)
Ghi chú thiết kế
Design the supply network around the STM32H747IIT6's 1.62 V to 3.6 V operating range. Follow the manufacturer regulator-mode configuration, capacitor values, and power-up sequencing requirements for the selected internal-regulator arrangement. Place bulk and local ceramic decoupling close to the device power pins, and keep switching-regulator ripple and transient excursions within the limits stated for the operating mode. Regulator configuration is performance- and firmware-sensitive, so avoid changing it without reviewing startup code and the device's power-management documentation.
The LQFP-176 package uses a 0.5 mm lead pitch and requires careful PCB design, inspection, and assembly control. Route high-speed signals according to the manufacturer peripheral recommendations, maintain continuous ground references beneath the device, and provide short, symmetric paths to clock and decoupling components. Because the package exposes many pins, use the manufacturer pin-definition table and package drawing directly when assigning nets and checking land-pattern symmetry.
A same-package alternative does not guarantee that boot code, interrupt priorities, peripheral instances, or clock-tree behavior remain identical. Before replacing the STM32H747IIT6, use STM32CubeMX to compare pin compatibility, review the boot pins, rebuild the startup and linker configuration, and test all communications. The M4-specific task model must also be reassigned when moving to a member without the Cortex-M4 companion core.
Although the LQFP-176 package provides a comparatively large lead area, internal self-heating depends on the selected clock, core utilization, voltage, and power-domain configuration. Do not equate package area with unlimited thermal margin. Validate worst-case junction temperature at the highest ambient temperature, supply voltage, and sustained core load, and use the manufacturer thermal data for the exact package and board assembly rather than relying on a generic land-pattern estimate.
Thông tin tuân thủ
RoHS status is listed for STM32H747IIT6 by the JLCPCB component record. Other environmental and automotive-qualification declarations are not established by the manufacturer-page information used for this record.