STMicroelectronics

STM32L431RBT6 - 80MHz Cortex-M4 128KB MCU | STMicroelectronics

MPN: STM32L431RBT6 ✓ Hoạt động
1.8 V, 2.5 V, and 3.3 V Vdss 64-LQFP (10 mm x 10 mm) Package 80 MHz Speed 128 KB (128K x 8) Memory
MOQ: 1 |

STM32L431RBT6 Tóm tắt

The STMicroelectronics STM32L431RBT6 is an ultra-low-power 32-bit microcontroller with a 128 KB Flash program memory, an Arm Cortex-M4 processor operating up to 80 MHz, and a 64-pin LQFP package measuring 10 mm by 10 mm. The processor includes a single-precision floating-point unit and DSP instructions for efficient control, signal-processing, and floating-point workloads.

An ultra-low-power microcontroller is a semiconductor designed to perform embedded processing while minimizing energy consumption during active operation, sleep, and low-power standby states. The STM32L4 series belongs to the hierarchy of embedded MCU, 32-bit RISC processor, Arm Cortex-M4 core, and power-management-aware semiconductor products. This combination makes it useful for compact industrial, sensor, medical-instrumentation, and connected-edge equipment that must balance responsiveness with battery life.

Key features include 80 MHz maximum core frequency, 128 KB of Flash memory, single-precision FPU hardware, DSP instruction support, and a 64-LQFP package. The supported 1.8 V, 2.5 V, and 3.3 V operating options allow the device to be integrated into conventional low-voltage embedded systems. The 64-pin package also provides more external connections than smaller microcontroller packages, supporting interfaces and mixed-signal designs that require additional I/O.

The Cortex-M4 architecture provides a 32-bit instruction set and hardware-assisted floating-point calculations, reducing software overhead in control loops, filtering, instrumentation, and digital signal processing. Compared with a Cortex-M0 or Cortex-M3 implementation, the Cortex-M4 core offers higher performance and dedicated DSP capabilities while retaining the established Arm Cortex-M software ecosystem. Firmware, startup files, drivers, and peripheral configurations must still be validated when changing devices or boards.

Typical uses include industrial sensor nodes, low-power data loggers, medical monitoring modules, building controls, compact motor-control electronics, and connected measurement equipment. The 128 KB Flash capacity accommodates application firmware and embedded software, while the 64-pin package offers flexibility for communication peripherals, analog inputs, timers, and external memory connections.

PCB design should preserve the manufacturer's recommended power, decoupling, clock, reset, and exposed-connection layout. Place the required bypass capacitors close to the supply pins, route sensitive analog inputs away from fast digital switching paths, and follow the package drawing for pin assignments and land geometry. Validate the assembled board across the intended voltage, temperature, clock, and low-power operating conditions.

This page combines manufacturer specifications, application guidance, lifecycle information, package details, and practical design considerations for engineers evaluating the STM32L431RBT6. It also organizes comparisons and sourcing questions around the specific 80 MHz Cortex-M4, 128 KB Flash, and 64-LQFP configuration rather than treating all STM32L4 devices as interchangeable.

Bộ thay thế dễ dàng lắp đặt cho STM32L431RBT6 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với STM32L431RBT6 (cùng hình factor và footprint) — khác nhau ở Package, Flash Memory, Low-Power Modes, RoHS Status, Timers.

STMicroelectronics
Package: LQFP-48 (7x7 mm)
Flash Memory: 128 KB
Low-Power Modes: Sleep, Low-power run, Low-power sleep, Stop 0/1/2, Standby
So sánh với STM32L431RBT6 →
STMicroelectronics
Package: 64-LQFP (10x10 mm)
Flash Memory: 256 KB
Low-Power Modes: Sleep, Low-power run, Low-power sleep, Stop 0/1/2, Standby, Shutdown
So sánh với STM32L431RBT6 →

STM32L431CBT6

✅ Drop-In ⚠️ Thông số chưa được xác minh
STMicroelectronics
📦 64-LQFP (10 mm x 10 mm)
ARM Cortex-M4 with FPU · 80 MHz · 128 KB · 64 KB · 1.71 V to 3.6 V · -40°C to +85°C · LQFP-48 (7x7 mm) · Surface Mount

✓ Còn hàng

$5.83 / Đơn vị

Xem tài liệu →

STM32L431RCT6

✅ Drop-In ⚠️ Thông số chưa được xác minh
STMicroelectronics
📦 64-LQFP (10 mm x 10 mm)
ARM Cortex-M4 with FPU · 80 MHz · 256 KB · 64 KB · 64-LQFP (10x10 mm) · 1.71V to 3.6V · -40C to +85C · 12-bit, up to 16 channels

✓ Còn hàng

$8.5909 / Đơn vị

Xem tài liệu →

STM32L431RBT6TR

✅ Drop-In
📦 64-LQFP (10 mm x 10 mm)
Same electrical configuration and 64-LQFP footprint; TR changes the orderable delivery format to tape and reel, so tray and reel BOM lines are not interchangeable.

📋 Tham chiếu thay thế (không có trong danh mục)

STM32L431RBT6 Tỷ lệ tối đa & tính chất điện

Product Type 32-bit ultra-low-power microcontroller
Processor Core Arm Cortex-M4
Maximum Core Frequency 80 MHz
Instruction Set 32-bit Arm RISC
Flash Program Memory 128 KB (128K x 8)
Floating-Point Unit Single-precision FPU
DSP Support DSP instructions
Operating Voltage Options 1.8 V, 2.5 V, and 3.3 V
Hộp 64-LQFP (10 mm x 10 mm)
Số chân 64 pins
Kiểu lắp đặt Surface mount
Device Family STM32L4 ultra-low-power series
Flash Organization 128K x 8
Trạng thái RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable
Packaging Type Tray

Hướng dẫn cấu hình chân STM32L431RBT6 64-lqfp (10 mm x 10 mm)

Cấu hình chân cho STM32L431RBT6 (64-lqfp (10 mm x 10 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 64-lqfp (10 mm x 10 mm) cho STM32L431RBT6

Không có dữ liệu chân cụ thể sẵn có cho STM32L431RBT6.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

STM32L431RBT6 phù hợp cho 6 Áp dụngs: Industrial Sensor Nodes, Medical Monitoring Modules, Low-Power Data Loggers, Building and HVAC Controls, Connected Measurement Equipment, Compact Motor and Actuator Control.

🏭

Industrial Sensor Nodes

The STM32L431RBT6 fits industrial sensor nodes that require more processing capability than a basic low-end controller without moving to a high-power processor. Its 80 MHz Arm Cortex-M4 core handles acquisition, filtering, and local decision-making, while the single-precision FPU accelerates arithmetic used in compensation and signal-conditioning routines. The 64-LQFP package exposes more I/O than a compact small-outline MCU, which helps when a node combines digital sensors, analog channels, communication ports, and local status indicators. The STMicroelectronics STM32L431xx manufacturer datasheet lists 1.8 V, 2.5 V, and 3.3 V operating options, allowing the controller to fit different industrial interface voltages. Low-power modes should be configured around the measurement duty cycle so the processor sleeps between samples. Firmware must confirm the exact pin assignments and peripheral resources used by the selected board configuration.

💊

Medical Monitoring Modules

The STM32L431RBT6 is appropriate for compact medical monitoring modules that need deterministic embedded processing, low-power operation, and a broad set of external connections. The 80 MHz Cortex-M4 core can process sensor streams and execute control algorithms, while its single-precision FPU supports calculations involving gain, offset, filtering, and logarithmic or trigonometric routines. A 64-LQFP package allows the design to connect sensing front ends, communication hardware, indicators, and safety or control signals without relying on a very small package. The manufacturer datasheet identifies 1.8 V, 2.5 V, and 3.3 V options, which can simplify integration with mixed-voltage medical modules. Actual operation requires validation of relevant device ratings, isolation boundaries, external protection, and applicable application requirements; the MCU rating alone does not establish medical-system compliance.

🧩

Low-Power Data Loggers

The STM32L431RBT6 supports low-power data loggers by combining an 80 MHz Cortex-M4 processor, 128 KB of Flash, and ultra-low-power device characteristics in a 64-pin LQFP. The microcontroller can compress, timestamp, and organize data gathered from sensors before storing it in external nonvolatile memory. The single-precision FPU makes it practical to run scaling and filtering functions without a higher-power application processor, while DSP instructions support common signal-processing operations. The 64-pin package provides sufficient fanout for serial memory, external sensors, a real-time clock, and status interfaces. To extend battery life, keep the radio and sensors disabled during capture intervals and use the low-power modes documented by STMicroelectronics. The 128 KB internal Flash also allows useful local buffering and configuration storage, although larger logs should be directed to external memory.

🏠

Building and HVAC Controls

The STM32L431RBT6 is well matched to building-control and HVAC controller modules that coordinate sensors, actuators, communications, and local user controls. Its 80 MHz Cortex-M4 core provides enough performance for control loops, schedule management, diagnostics, and communication framing, while the FPU assists with calculations involving temperature, flow, and energy use. The 64-LQFP footprint offers a practical number of I/O pins for inputs, relay or triac-control signals, displays, and bus transceivers. Compatibility with 1.8 V, 2.5 V, and 3.3 V operation supports integration with multiple interface families. Board designers should place transient protection and isolation components where required, keep mains-related switching separated from low-voltage logic, and route sensitive analog channels away from power-conversion nodes. Validate startup, brownout behavior, and low-power wake-up using the manufacturer's timing specifications.

📡

Connected Measurement Equipment

The STM32L431RBT6 can serve as the central controller in connected measurement equipment where local processing, communication, and precise timing must coexist in a compact system. The 80 MHz Cortex-M4 core and DSP instructions support filtering and real-time measurement tasks, while the hardware FPU improves throughput for calibration and transformation routines. Its 64-LQFP package can accommodate analog-to-digital converter interfaces, display controls, USB or network transceivers, and external memory. The device's 1.8 V, 2.5 V, and 3.3 V options help simplify interface partitioning, particularly when sensors and communication logic use different voltage levels. For reliable results, isolate analog and digital ground-current paths carefully, follow the manufacturer's decoupling recommendations, and verify clock accuracy and peripheral timing in the final layout. Firmware should also include safe recovery behavior for communications loss and sensor faults.

🔧

Compact Motor and Actuator Control

The STM32L431RBT6 can be used in compact motor and actuator controllers where the 80 MHz Cortex-M4 core provides faster control-loop execution than simpler general-purpose microcontrollers. The single-precision FPU and DSP instructions are useful for proportional-integral-derivative calculations, filtering, position processing, and current-control algorithms. Its 64-LQFP package provides enough connections for encoder inputs, current sensing, gate-driver control, communications, and protection signaling, while the 128 KB Flash capacity accommodates control code and parameter tables. The supported 1.8 V, 2.5 V, and 3.3 V operating options allow logic-voltage partitioning, but motor power and sensing signals require suitable external interface components. Layout should keep high-current switching paths away from the MCU and analog front end, use the manufacturer's decoupling and pin guidance, and validate timing margin under worst-case processing load and temperature conditions.

What are the key specifications of STM32L431RBT6 that engineers should know?
The STM32L431RBT6 combines an 80 MHz Arm Cortex-M4 core with 128 KB of Flash memory in a 64-pin LQFP package. It also provides a single-precision floating-point unit, DSP instructions, and 1.8 V, 2.5 V, and 3.3 V operating options. According to the STMicroelectronics STM32L431xx manufacturer datasheet, its ultra-low-power design targets embedded applications where processing performance and reduced energy use are both important.
What is the operating voltage of STM32L431RBT6?
The STM32L431RBT6 supports 1.8 V, 2.5 V, and 3.3 V operating voltage options. The STMicroelectronics STM32L431xx manufacturer datasheet should be used to confirm the voltage limits associated with each power domain, regulator configuration, and operating mode before finalizing the board power architecture. This device is not a 5 V direct-input part.
How much Flash memory does the STM32L431RBT6 contain?
The STM32L431RBT6 contains 128 KB of Flash program memory organized as 128K x 8. According to the STMicroelectronics STM32L431xx manufacturer datasheet, the device uses the RB density designation within the STM32L431 family. Flash capacity affects the available firmware image size, bootloader space, and the amount of application code that can be stored.
What processor core is used in the STM32L431RBT6?
The STM32L431RBT6 uses a 32-bit Arm Cortex-M4 RISC core operating up to 80 MHz. The STMicroelectronics STM32L431xx manufacturer datasheet also identifies a single-precision floating-point unit and DSP instruction support. These features make the device suitable for floating-point control, digital filtering, and other signal-processing workloads.
Where can I download the STM32L431RBT6 datasheet PDF?
The official STM32L431RBT6 datasheet PDF is available from the STMicroelectronics STM32L431xx datasheet page. The manufacturer document describes the 80 MHz Cortex-M4 core, 128 KB Flash configuration, electrical characteristics, peripherals, and package information. Use the STM32L431RB product page as the starting point for related device documentation and software resources.
Where can I find the STM32L431RBT6 pinout and package drawing?
The STM32L431RBT6 pinout and package drawing are contained in the pin description and package sections of the STMicroelectronics STM32L431xx manufacturer datasheet. The device is packaged in 64-LQFP, 10 mm x 10 mm. Use the pin-description table when assigning PCB nets and the package drawing when defining land patterns, courtyard clearances, and assembly orientation.
Where can I buy STM32L431RBT6 online and what is its price?
The STM32L431RBT6 can be requested through the Request a Quote form on this page, which supports current price, stock, and lead-time inquiries for the exact 64-LQFP device. The part number identifies a 128 KB Flash STM32L431RB configuration in tray packaging; confirm the suffix and package before submitting a production quantity.
What is the current lead time for STM32L431RBT6?
The current lead time for STM32L431RBT6 should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, package configuration, and supply conditions. When requesting a quotation, identify the exact MPN, tray quantity required, target delivery date, and whether the design must ship as a single-source approved component.
Is STM32L431RBT6 in stock?
Current STM32L431RBT6 availability should be checked through the Request a Quote form on this page. The listing identifies the exact STMicroelectronics MPN in a 64-LQFP package, but stock status changes continuously. Provide your required quantity and production schedule so the order can be matched to an appropriate supply channel.
STM32L431RBT6 vs STM32L431RCT6 - which is better for a new design?
STM32L431RBT6 provides 128 KB of Flash, while STM32L431RCT6 belongs to the higher-density RC configuration with 256 KB of Flash in the same 64-pin package family. The STMicroelectronics STM32L431RB manufacturer documentation confirms the target device's 128 KB configuration. Choose the RC variant only after checking its complete pin description, memory map, firmware requirements, and electrical characteristics.
STM32L431RBT6 vs STM32L431CBT6 - what should designers compare?
Both devices belong to the STM32L431 family and use the same 64-pin package family, but their orderable density and temperature suffixes must be checked before substitution. The STM32L431RBT6 has 128 KB of Flash, as stated by the STMicroelectronics STM32L431xx manufacturer datasheet. Compare memory capacity, temperature grade, pin availability, peripheral configuration, and firmware image compatibility for STM32L431CBT6.
When should I choose STM32L431RBT6 over STM32L431RCT6?
Choose STM32L431RBT6 when 128 KB of Flash is sufficient and the design does not need the additional memory offered by STM32L431RCT6. The target device combines an 80 MHz Cortex-M4 core, single-precision FPU, and 64-LQFP packaging. The RC version can be preferable when a larger code image or additional memory headroom is required, provided its complete electrical and pin characteristics are reviewed.
Is STM32L431RBT6 suitable for low-power sensor applications?
The STM32L431RBT6 is suitable for low-power sensor applications because it is an ultra-low-power Cortex-M4 microcontroller with an 80 MHz operating ceiling and support for 1.8 V, 2.5 V, and 3.3 V operation. The STMicroelectronics STM32L431xx manufacturer datasheet defines the available low-power modes and wake-up behavior. Actual battery life depends on the duty cycle, sensor load, and selected sleep configuration.
What can replace STM32L431RBT6?
A direct replacement should retain the 64-LQFP footprint, 3.3 V-class electrical behavior, Arm Cortex-M software expectations, and at least 128 KB of Flash. STM32L431-family density variants can be evaluated because they use the same family architecture, but firmware, boot configuration, peripherals, and package details must be checked. The replacement should be qualified with the manufacturer datasheet rather than selected from a generic equivalent list.
What is the best STMicroelectronics equivalent for STM32L431RBT6?
The closest STMicroelectronics alternatives are density variants in the STM32L431 family, including STM32L431CBT6 and STM32L431RCT6, because they use the same 64-pin LQFP package family and Cortex-M4 architecture. The STM32L431RBT6 has 128 KB of Flash, while these variants differ in density or ordering codes. Verify temperature grade, pin availability, firmware compatibility, and every board-level connection before designating a replacement.
How do I design the PCB around the STM32L431RBT6?
Design the STM32L431RBT6 PCB by following the STMicroelectronics STM32L431xx manufacturer datasheet for pin assignments, power pins, decoupling, clock, reset, and package geometry. Place required bypass capacitors close to their supply pins and route high-speed or sensitive signals away from noisy switching paths. Because the part is a 64-LQFP device, check fanout carefully and verify the selected land pattern against the official package drawing.

Dữ liệu tham khảo kỹ thuật cho STM32L431RBT6 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose STM32L431RBT6 when a design needs an 80 MHz Arm Cortex-M4 core, single-precision FPU, DSP instructions, and 128 KB of Flash in a 64-LQFP package. It is a practical fit for industrial sensor nodes, medical monitoring modules, data loggers, building controls, and connected measurement instruments requiring multiple I/O connections and low-power operation. Choose STM32L431RCT6 when additional Flash capacity is useful and the larger memory configuration is acceptable. Choose STM32L431CBT6 only after checking its density, temperature ordering code, peripheral resources, and boot configuration against the target design. STM32L431RBT6TR is electrically equivalent but ordered in tape-and-reel format, so it is relevant when automated reel-to-reel assembly is required rather than tray handling. For any substitution, verify the pin table, electrical limits, firmware compatibility, thermal performance, and manufacturing format against the manufacturer datasheet.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này STM32L431CBT6 STM32L431RCT6 STM32L431RBT6TR
Package 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm)
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Processor Core Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4
Maximum Frequency 80 MHz 80 MHz 80 MHz 80 MHz
Floating-Point Unit Single-precision FPU Single-precision FPU Single-precision FPU Single-precision FPU
DSP Instructions Supported Supported Supported Supported

Bảo phân biệt quan trọng

  • Provides 128 KB of Flash in a 64-LQFP Cortex-M4 device (vsSTM32L431RCT6)
  • Delivers an 80 MHz Cortex-M4 core with hardware single-precision FPU (vsSTM32L431RBT6TR)
  • Uses a 64-pin LQFP for higher I/O availability than smaller-outline MCUs (vsSTM32L431CBT6)

Ghi chú thiết kế

Follow the STMicroelectronics STM32L431xx manufacturer datasheet when assigning supply pins and placing bypass capacitors. Keep each required decoupling capacitor adjacent to its intended power pin and minimize the return-path impedance through nearby ground-plane connections. The device supports 1.8 V, 2.5 V, and 3.3 V operation, so the regulator design and signal levels must be matched to the selected voltage. Do not assume that every external interface is 3.3 V tolerant; check the final pin-level limits and external transceiver requirements.

Use the official 64-LQFP package drawing and pin-description table to define the PCB footprint and net assignments. Place decoupling and clock components before assigning the remaining pins, and route high-speed or sensitive analog signals away from switching nodes and long parallel copper runs. A 10 mm by 10 mm LQFP provides more I/O than a small-outline MCU, but its fine-pitch perimeter still requires careful fanout, solder mask, and assembly-process design.

Do not substitute another STM32L431 density or packaging suffix without checking the complete device configuration. The STM32L431RBT6 and STM32L431RBT6TR share the electrical target but use different delivery formats, while STM32L431RCT6 provides a different Flash-density configuration. Review boot configuration, firmware image size, peripheral assignments, temperature grade, and the manufacturer's package drawing before approving a substitute. A family resemblance alone does not establish drop-in qualification.

Validate thermal performance at the maximum intended clock frequency, peripheral load, ambient temperature, and supply voltage. Although the LQFP exposes a larger copper land than many small-outline packages, its thermal behavior still depends on board area, copper layers, airflow, and neighboring heat sources. Keep regulators and switching components away from sensitive clock or analog routing, and confirm that the assembled board maintains acceptable junction and peripheral temperatures in its enclosure.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The STM32L431RB family is an industrial microcontroller product rather than an AEC-Q100 automotive-qualified variant. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established from the available manufacturer pages.

Dữ liệu được xác minh vào: 2026-11-19 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

STM32L431RBT6 STM32L431RBT6 datasheet STM32L431RBT6 datasheet pdf STM32L431RBT6 pinout STM32L431RBT6 schematic STM32L431RBT6 equivalent STM32L431RBT6 replacement STM32L431RBT6 vs STM32L431RCT6 STM32L431RBT6 LQFP-64 footprint STM32L431RBT6 price STM32L431RBT6 stock STMicroelectronics STM32L431RBT6 STM32L431RBT6 low power application STM32L431RB programming reference

Các bộ phận và thuật ngữ liên quan

STMicroelectronics STM32L431RBT6 STM32L431RB STM32L431CBT6 STM32L431RCT6 STM32L431RBT6TR Arm Cortex-M4 Arm Cortex-M 32-bit RISC ultra-low-power microcontroller embedded microcontroller single-precision FPU DSP instructions 128 KB Flash memory 64-LQFP package LQFP-64 surface-mount package 1.8 V operation 2.5 V operation 3.3 V operation industrial sensor nodes medical monitoring modules low-power data loggers building and HVAC controls connected measurement equipment
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ