STM32L431RBT6 - 80MHz Cortex-M4 128KB MCU | STMicroelectronics
料号: STM32L431RBT6 ✓ 量产中STM32L431RBT6 概述
An ultra-low-power microcontroller is a semiconductor designed to perform embedded processing while minimizing energy consumption during active operation, sleep, and low-power standby states. The STM32L4 series belongs to the hierarchy of embedded MCU, 32-bit RISC processor, Arm Cortex-M4 core, and power-management-aware semiconductor products. This combination makes it useful for compact industrial, sensor, medical-instrumentation, and connected-edge equipment that must balance responsiveness with battery life.
Key features include 80 MHz maximum core frequency, 128 KB of Flash memory, single-precision FPU hardware, DSP instruction support, and a 64-LQFP package. The supported 1.8 V, 2.5 V, and 3.3 V operating options allow the device to be integrated into conventional low-voltage embedded systems. The 64-pin package also provides more external connections than smaller microcontroller packages, supporting interfaces and mixed-signal designs that require additional I/O.
The Cortex-M4 architecture provides a 32-bit instruction set and hardware-assisted floating-point calculations, reducing software overhead in control loops, filtering, instrumentation, and digital signal processing. Compared with a Cortex-M0 or Cortex-M3 implementation, the Cortex-M4 core offers higher performance and dedicated DSP capabilities while retaining the established Arm Cortex-M software ecosystem. Firmware, startup files, drivers, and peripheral configurations must still be validated when changing devices or boards.
Typical uses include industrial sensor nodes, low-power data loggers, medical monitoring modules, building controls, compact motor-control electronics, and connected measurement equipment. The 128 KB Flash capacity accommodates application firmware and embedded software, while the 64-pin package offers flexibility for communication peripherals, analog inputs, timers, and external memory connections.
PCB design should preserve the manufacturer's recommended power, decoupling, clock, reset, and exposed-connection layout. Place the required bypass capacitors close to the supply pins, route sensitive analog inputs away from fast digital switching paths, and follow the package drawing for pin assignments and land geometry. Validate the assembled board across the intended voltage, temperature, clock, and low-power operating conditions.
This page combines manufacturer specifications, application guidance, lifecycle information, package details, and practical design considerations for engineers evaluating the STM32L431RBT6. It also organizes comparisons and sourcing questions around the specific 80 MHz Cortex-M4, 128 KB Flash, and 64-LQFP configuration rather than treating all STM32L4 devices as interchangeable.
直接替换替代料: STM32L431RBT6 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: STM32L431RBT6 (相同外形与封装尺寸) ——差异在于 Package, Flash Memory, Low-Power Modes, RoHS Status, Timers.
STM32L431CBT6
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$5.83 / 个
查看数据手册 →STM32L431RCT6
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$8.5909 / 个
查看数据手册 →STM32L431RBT6TR
✅ 直接替换📋 参考替代料(不在目录中)
STM32L431RBT6 最大额定值与电气特性
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M4 |
| Maximum Core Frequency | 80 MHz |
| Instruction Set | 32-bit Arm RISC |
| Flash Program Memory | 128 KB (128K x 8) |
| Floating-Point Unit | Single-precision FPU |
| DSP Support | DSP instructions |
| Operating Voltage Options | 1.8 V, 2.5 V, and 3.3 V |
| 封装 | 64-LQFP (10 mm x 10 mm) |
| 引脚数量 | 64 pins |
| 安装类型 | Surface mount |
| Device Family | STM32L4 ultra-low-power series |
| Flash Organization | 128K x 8 |
| RoHS 状态 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
| Packaging Type | Tray |
STM32L431RBT6 64-lqfp (10 mm x 10 mm) 引脚配置指南
STM32L431RBT6(64-lqfp (10 mm x 10 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: STM32L431RBT6.
请参阅 数据手册 以查看完整引脚配置。
典型应用
STM32L431RBT6 适用于 6 应用s: Industrial Sensor Nodes, Medical Monitoring Modules, Low-Power Data Loggers, Building and HVAC Controls, Connected Measurement Equipment, Compact Motor and Actuator Control.
Industrial Sensor Nodes
The STM32L431RBT6 fits industrial sensor nodes that require more processing capability than a basic low-end controller without moving to a high-power processor. Its 80 MHz Arm Cortex-M4 core handles acquisition, filtering, and local decision-making, while the single-precision FPU accelerates arithmetic used in compensation and signal-conditioning routines. The 64-LQFP package exposes more I/O than a compact small-outline MCU, which helps when a node combines digital sensors, analog channels, communication ports, and local status indicators. The STMicroelectronics STM32L431xx manufacturer datasheet lists 1.8 V, 2.5 V, and 3.3 V operating options, allowing the controller to fit different industrial interface voltages. Low-power modes should be configured around the measurement duty cycle so the processor sleeps between samples. Firmware must confirm the exact pin assignments and peripheral resources used by the selected board configuration.
推荐
Medical Monitoring Modules
The STM32L431RBT6 is appropriate for compact medical monitoring modules that need deterministic embedded processing, low-power operation, and a broad set of external connections. The 80 MHz Cortex-M4 core can process sensor streams and execute control algorithms, while its single-precision FPU supports calculations involving gain, offset, filtering, and logarithmic or trigonometric routines. A 64-LQFP package allows the design to connect sensing front ends, communication hardware, indicators, and safety or control signals without relying on a very small package. The manufacturer datasheet identifies 1.8 V, 2.5 V, and 3.3 V options, which can simplify integration with mixed-voltage medical modules. Actual operation requires validation of relevant device ratings, isolation boundaries, external protection, and applicable application requirements; the MCU rating alone does not establish medical-system compliance.
推荐
Low-Power Data Loggers
The STM32L431RBT6 supports low-power data loggers by combining an 80 MHz Cortex-M4 processor, 128 KB of Flash, and ultra-low-power device characteristics in a 64-pin LQFP. The microcontroller can compress, timestamp, and organize data gathered from sensors before storing it in external nonvolatile memory. The single-precision FPU makes it practical to run scaling and filtering functions without a higher-power application processor, while DSP instructions support common signal-processing operations. The 64-pin package provides sufficient fanout for serial memory, external sensors, a real-time clock, and status interfaces. To extend battery life, keep the radio and sensors disabled during capture intervals and use the low-power modes documented by STMicroelectronics. The 128 KB internal Flash also allows useful local buffering and configuration storage, although larger logs should be directed to external memory.
推荐
Building and HVAC Controls
The STM32L431RBT6 is well matched to building-control and HVAC controller modules that coordinate sensors, actuators, communications, and local user controls. Its 80 MHz Cortex-M4 core provides enough performance for control loops, schedule management, diagnostics, and communication framing, while the FPU assists with calculations involving temperature, flow, and energy use. The 64-LQFP footprint offers a practical number of I/O pins for inputs, relay or triac-control signals, displays, and bus transceivers. Compatibility with 1.8 V, 2.5 V, and 3.3 V operation supports integration with multiple interface families. Board designers should place transient protection and isolation components where required, keep mains-related switching separated from low-voltage logic, and route sensitive analog channels away from power-conversion nodes. Validate startup, brownout behavior, and low-power wake-up using the manufacturer's timing specifications.
推荐
Connected Measurement Equipment
The STM32L431RBT6 can serve as the central controller in connected measurement equipment where local processing, communication, and precise timing must coexist in a compact system. The 80 MHz Cortex-M4 core and DSP instructions support filtering and real-time measurement tasks, while the hardware FPU improves throughput for calibration and transformation routines. Its 64-LQFP package can accommodate analog-to-digital converter interfaces, display controls, USB or network transceivers, and external memory. The device's 1.8 V, 2.5 V, and 3.3 V options help simplify interface partitioning, particularly when sensors and communication logic use different voltage levels. For reliable results, isolate analog and digital ground-current paths carefully, follow the manufacturer's decoupling recommendations, and verify clock accuracy and peripheral timing in the final layout. Firmware should also include safe recovery behavior for communications loss and sensor faults.
推荐
Compact Motor and Actuator Control
The STM32L431RBT6 can be used in compact motor and actuator controllers where the 80 MHz Cortex-M4 core provides faster control-loop execution than simpler general-purpose microcontrollers. The single-precision FPU and DSP instructions are useful for proportional-integral-derivative calculations, filtering, position processing, and current-control algorithms. Its 64-LQFP package provides enough connections for encoder inputs, current sensing, gate-driver control, communications, and protection signaling, while the 128 KB Flash capacity accommodates control code and parameter tables. The supported 1.8 V, 2.5 V, and 3.3 V operating options allow logic-voltage partitioning, but motor power and sensing signals require suitable external interface components. Layout should keep high-current switching paths away from the MCU and analog front end, use the manufacturer's decoupling and pin guidance, and validate timing margin under worst-case processing load and temperature conditions.
推荐
推荐产品汇总
工程参考数据: STM32L431RBT6 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | STM32L431CBT6 | STM32L431RCT6 | STM32L431RBT6TR |
|---|---|---|---|---|
| Package | 64-LQFP (10 mm x 10 mm) | 64-LQFP (10 mm x 10 mm) | 64-LQFP (10 mm x 10 mm) | 64-LQFP (10 mm x 10 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum Frequency | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| Floating-Point Unit | Single-precision FPU | Single-precision FPU | Single-precision FPU | Single-precision FPU |
| DSP Instructions | Supported | Supported | Supported | Supported |
关键差异点
- Provides 128 KB of Flash in a 64-LQFP Cortex-M4 device (对比 STM32L431RCT6)
- Delivers an 80 MHz Cortex-M4 core with hardware single-precision FPU (对比 STM32L431RBT6TR)
- Uses a 64-pin LQFP for higher I/O availability than smaller-outline MCUs (对比 STM32L431CBT6)
设计说明
Follow the STMicroelectronics STM32L431xx manufacturer datasheet when assigning supply pins and placing bypass capacitors. Keep each required decoupling capacitor adjacent to its intended power pin and minimize the return-path impedance through nearby ground-plane connections. The device supports 1.8 V, 2.5 V, and 3.3 V operation, so the regulator design and signal levels must be matched to the selected voltage. Do not assume that every external interface is 3.3 V tolerant; check the final pin-level limits and external transceiver requirements.
Use the official 64-LQFP package drawing and pin-description table to define the PCB footprint and net assignments. Place decoupling and clock components before assigning the remaining pins, and route high-speed or sensitive analog signals away from switching nodes and long parallel copper runs. A 10 mm by 10 mm LQFP provides more I/O than a small-outline MCU, but its fine-pitch perimeter still requires careful fanout, solder mask, and assembly-process design.
Do not substitute another STM32L431 density or packaging suffix without checking the complete device configuration. The STM32L431RBT6 and STM32L431RBT6TR share the electrical target but use different delivery formats, while STM32L431RCT6 provides a different Flash-density configuration. Review boot configuration, firmware image size, peripheral assignments, temperature grade, and the manufacturer's package drawing before approving a substitute. A family resemblance alone does not establish drop-in qualification.
Validate thermal performance at the maximum intended clock frequency, peripheral load, ambient temperature, and supply voltage. Although the LQFP exposes a larger copper land than many small-outline packages, its thermal behavior still depends on board area, copper layers, airflow, and neighboring heat sources. Keep regulators and switching components away from sensitive clock or analog routing, and confirm that the assembled board maintains acceptable junction and peripheral temperatures in its enclosure.
合规信息
The STM32L431RB family is an industrial microcontroller product rather than an AEC-Q100 automotive-qualified variant. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established from the available manufacturer pages.