VSC8502RD-VR - Gigabit Ethernet PHY | Microchip
MPN: VSC8502RD-VR ✓ Hoạt độngVSC8502RD-VR Tóm tắt
A Gigabit Ethernet physical-layer transceiver, commonly called an Ethernet PHY, converts between digital data supplied by a media-access controller and analog signals carried over twisted-pair cabling. The VSC8502 supports 10, 100, and 1000 Mb/s operation, allowing one physical-layer device to serve multiple Ethernet speed requirements. This PHY belongs to the interface-IC and network-interface hierarchy used in routers, switches, industrial controllers, and embedded equipment.
Integrated line-side termination is a central feature of the VSC8502 family. Placing the termination network within the device can reduce the number of external passive components required around the magnetic interface. The manufacturer describes this integration as helping conserve board space, lower EMI, and improve system performance. Exact operating limits, electrical thresholds, temperature ratings, and pin assignments must be confirmed in the manufacturer documentation before schematic release.
The VSC8502 family is intended for compact 10/100/1000BASE-T equipment where PCB area and external-component count are important. Its multi-rate capability makes it applicable to industrial Ethernet interfaces, communication equipment, embedded control systems, and managed network products. The integrated termination feature can also simplify board layout in applications requiring repeatable magnetics-interface implementation across multiple ports.
Typical implementations place the PHY beside an Ethernet transformer and connect it to a network processor, switch fabric, or other digital controller through an appropriate digital interface. The physical implementation should preserve controlled differential routing, adequate return paths, and a properly designed termination network. Because exact pin names, supply voltage, clock requirements, and interface modes are not stated on the manufacturer product page excerpt, designers should use the complete VSC8502 datasheet and package drawing for implementation decisions.
Design planning should begin with the required Ethernet speed, magnetics selection, digital-controller interface, board stack-up, and environmental target. Check the package pin count, exposed-pad requirements, decoupling recommendations, and layout guidance in the manufacturer documentation. This overview supports initial architecture selection, while the complete datasheet remains the controlling source for production release.
This product page combines manufacturer application information with practical Ethernet-interface guidance, replacement considerations, and design notes. It is intended to accelerate component selection for 10/100/1000BASE-T designs while directing engineers to the authoritative datasheet for pin-level and production details.
Bộ thay thế dễ dàng lắp đặt cho VSC8502RD-VR — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với VSC8502RD-VR (cùng hình factor và footprint) — khác nhau ở Primary Application.
VSC8502RD
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →VSC8502EV
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
VSC8502XML
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →VSC8502RD-VR Thông số kỹ thuật
| Ethernet Data Rates | 10/100/1000 Mb/s |
| Supported Physical Layer | 10/100/1000BASE-T |
| Device Type | Ethernet physical-layer transceiver |
| Integrated Line-Side Termination | Yes |
| Primary Application | Space-constrained Gigabit Ethernet equipment |
| Termination Benefit | Conserves board space and lowers EMI |
| Maximum Data Rate | 1000 Mb/s |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| Trạng thái vòng đời | Active |
Hướng dẫn cấu hình chân VSC8502RD-VR standard
Cấu hình chân cho VSC8502RD-VR (standard gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho VSC8502RD-VR.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
VSC8502RD-VR phù hợp cho 6 Áp dụngs: Compact Gigabit Ethernet Routers, Industrial Ethernet Controllers, Managed Network Switch Ports, Embedded Communication Gateways, Networked Test and Measurement Equipment, IoT Gateways and Edge Nodes.
Compact Gigabit Ethernet Routers
The VSC8502RD-VR fits compact routers that need one copper Ethernet physical layer supporting 10, 100, and 1000 Mb/s. The integrated line-side termination can reduce the passive-component count around the line interface, which is valuable when several ports share limited board area. Place the PHY according to the manufacturer's reference layout and pair each differential channel with the specified Ethernet magnetics. Its three supported rates also allow a common design to cover management, uplink, and legacy-speed ports, although the exact digital host interface and auto-negotiation behavior must be confirmed before routing signals in the host controller.
Được đề xuất
Industrial Ethernet Controllers
The VSC8502RD-VR is appropriate for industrial control equipment requiring 10/100/1000BASE-T connectivity within a constrained enclosure. Supporting 10, 100, and 1000 Mb/s permits the same physical layer to support supervisory links and high-bandwidth data paths. Integrated line-side termination helps simplify the magnetics-interface area and can lower EMI while saving board space. Before selecting it for an industrial product, verify the exact temperature range, isolation strategy, emissions expectations, and hardware interfaces in the complete manufacturer documentation.
Được đề xuất
Managed Network Switch Ports
The VSC8502RD-VR can support 10/100/1000 Mb/s copper ports in space-conscious managed switching equipment. Its integrated line-side termination is useful when board area around each magnetics interface is tightly constrained and can assist with EMI control. The PHY should be paired with manufacturer-recommended Ethernet transformers and laid out with controlled impedance for both 100 Mb/s and 1000 Mb/s operation. Exact parallel-interface behavior, reference clocks, and data-sheet timing must be reviewed before connecting the device to the switching fabric.
Được đề xuất
Embedded Communication Gateways
The VSC8502RD-VR is suitable for embedded gateways that bridge local control electronics with an Ethernet network. Its 10, 100, and 1000 Mb/s capability allows designers to support multiple link speeds with a common physical layer, while integrated line-side termination reduces the component burden around the transformer interface. This is useful where enclosure space and EMC performance are both important. Confirm the host interface, supply requirements, operating-temperature limits, and package footprint against the exact datasheet before committing the board layout.
Được đề xuất
Networked Test and Measurement Equipment
The VSC8502RD-VR can provide a compact Ethernet connection for test and measurement instruments requiring 10/100/1000BASE-T access. Multi-rate support allows the product to accommodate laboratory computers and management networks operating at different speeds. The integrated line-side termination reduces board-space and EMI pressure around the line interface, which is beneficial in portable or densely packaged instruments. Validation should include checking the recommended magnetics, isolation requirements, copper impedance, and the manufacturer's recommended high-speed layout to preserve reliable link performance.
Được đề xuất
IoT Gateways and Edge Nodes
The VSC8502RD-VR is applicable to connected edge nodes that need a wired Ethernet uplink supporting 10, 100, or 1000 Mb/s. Its integrated line-side termination can simplify the physical layer and conserve board area in compact gateways. The common 10/100/1000BASE-T capability also provides deployment flexibility across existing network infrastructure. Use the manufacturer reference circuit to select compatible magnetics and decoupling, then verify thermal, supply, interface-mode, and footprint requirements in the complete datasheet before production release.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho VSC8502RD-VR — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | VSC8502RD | VSC8502EV | VSC8502XML |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Ethernet Data Rates | 10/100/1000 Mb/s | 10/100/1000 Mb/s | 10/100/1000 Mb/s | 10/100/1000 Mb/s |
| Supported Physical Layer | 10/100/1000BASE-T | 10/100/1000BASE-T | 10/100/1000BASE-T | 10/100/1000BASE-T |
| Integrated Line-Side Termination | Yes | Yes | Yes | Yes |
| Primary Application | Space-constrained 10/100/1000BASE-T equipment | Space-constrained 10/100/1000BASE-T equipment | Space-constrained 10/100/1000BASE-T equipment | Space-constrained 10/100/1000BASE-T equipment |
| Ordering Suffix | RD-VR | RD | EV | XML |
Bảo phân biệt quan trọng
- Integrated line-side termination reduces the magnetics-interface component burden (vsVSC8502RD)
- Multi-rate copper Ethernet support in one physical layer (vsVSC8502EV)
- Space and EMI benefit from integrated termination (vsVSC8502XML)
Ghi chú thiết kế
Use the manufacturer reference layout for the PHY-to-magnetics differential pairs. Keep the 10/100/1000BASE-T traces short, impedance controlled, and continuously referenced to a solid ground plane. Avoid introducing stubs or changing layer transitions beneath the interface area. Because the VSC8502 family integrates line-side termination, preserve the specified placement and spacing of the magnetics and termination network rather than duplicating or rearranging it experimentally.
Integrated line-side termination can lower EMI and reduce board area, but the Ethernet magnics and connector still require controlled layout. Follow the recommended transformer pin orientation, isolation spacing, and copper keepout rules. Check both radiated and conducted emissions at the product level because PHY integration alone does not replace proper grounding, filtering, shielding, or enclosure design.
Do not assume that every VSC8502 ordering suffix has the same footprint, temperature grade, or delivery format. Compare the exact package drawing, pin-description table, electrical limits, and ordering information for VSC8502RD-VR and any proposed substitute. In particular, confirm that the host interface, reference-clock arrangement, supply requirements, and exposed-pad connection are unchanged before treating a variant as a drop-in replacement.
Decouple each supply rail at the device with the capacitance and placement specified in the complete datasheet, and provide the required clock or reset behavior before enabling the PHY. Keep switching regulators and high-current digital paths away from the Ethernet differential interface. Verify the system power budget across 10, 100, and 1000 Mb/s operating conditions because link activity and termination behavior can affect current demand.
Thông tin tuân thủ
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were stated for this exact ordering code.