VSC8502RD-VR - Gigabit Ethernet PHY | Microchip
MPN: VSC8502RD-VR ✓ 啟用中VSC8502RD-VR 概覽
A Gigabit Ethernet physical-layer transceiver, commonly called an Ethernet PHY, converts between digital data supplied by a media-access controller and analog signals carried over twisted-pair cabling. The VSC8502 supports 10, 100, and 1000 Mb/s operation, allowing one physical-layer device to serve multiple Ethernet speed requirements. This PHY belongs to the interface-IC and network-interface hierarchy used in routers, switches, industrial controllers, and embedded equipment.
Integrated line-side termination is a central feature of the VSC8502 family. Placing the termination network within the device can reduce the number of external passive components required around the magnetic interface. The manufacturer describes this integration as helping conserve board space, lower EMI, and improve system performance. Exact operating limits, electrical thresholds, temperature ratings, and pin assignments must be confirmed in the manufacturer documentation before schematic release.
The VSC8502 family is intended for compact 10/100/1000BASE-T equipment where PCB area and external-component count are important. Its multi-rate capability makes it applicable to industrial Ethernet interfaces, communication equipment, embedded control systems, and managed network products. The integrated termination feature can also simplify board layout in applications requiring repeatable magnetics-interface implementation across multiple ports.
Typical implementations place the PHY beside an Ethernet transformer and connect it to a network processor, switch fabric, or other digital controller through an appropriate digital interface. The physical implementation should preserve controlled differential routing, adequate return paths, and a properly designed termination network. Because exact pin names, supply voltage, clock requirements, and interface modes are not stated on the manufacturer product page excerpt, designers should use the complete VSC8502 datasheet and package drawing for implementation decisions.
Design planning should begin with the required Ethernet speed, magnetics selection, digital-controller interface, board stack-up, and environmental target. Check the package pin count, exposed-pad requirements, decoupling recommendations, and layout guidance in the manufacturer documentation. This overview supports initial architecture selection, while the complete datasheet remains the controlling source for production release.
This product page combines manufacturer application information with practical Ethernet-interface guidance, replacement considerations, and design notes. It is intended to accelerate component selection for 10/100/1000BASE-T designs while directing engineers to the authoritative datasheet for pin-level and production details.
直接替換替代品,適用於 VSC8502RD-VR — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: VSC8502RD-VR (相同外形與佔位) — 差異在於 Primary Application.
VSC8502RD
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →VSC8502EV
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
VSC8502XML
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →VSC8502RD-VR 規格
| Ethernet Data Rates | 10/100/1000 Mb/s |
| Supported Physical Layer | 10/100/1000BASE-T |
| Device Type | Ethernet physical-layer transceiver |
| Integrated Line-Side Termination | Yes |
| Primary Application | Space-constrained Gigabit Ethernet equipment |
| Termination Benefit | Conserves board space and lowers EMI |
| Maximum Data Rate | 1000 Mb/s |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| 生命週期狀態 | Active |
VSC8502RD-VR standard 腳位配置指南
VSC8502RD-VR(standard 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: VSC8502RD-VR.
請參閱 資料表 以查看完整腳位配置。
典型應用
VSC8502RD-VR 適用於 6 應用s: Compact Gigabit Ethernet Routers, Industrial Ethernet Controllers, Managed Network Switch Ports, Embedded Communication Gateways, Networked Test and Measurement Equipment, IoT Gateways and Edge Nodes.
Compact Gigabit Ethernet Routers
The VSC8502RD-VR fits compact routers that need one copper Ethernet physical layer supporting 10, 100, and 1000 Mb/s. The integrated line-side termination can reduce the passive-component count around the line interface, which is valuable when several ports share limited board area. Place the PHY according to the manufacturer's reference layout and pair each differential channel with the specified Ethernet magnetics. Its three supported rates also allow a common design to cover management, uplink, and legacy-speed ports, although the exact digital host interface and auto-negotiation behavior must be confirmed before routing signals in the host controller.
推薦
Industrial Ethernet Controllers
The VSC8502RD-VR is appropriate for industrial control equipment requiring 10/100/1000BASE-T connectivity within a constrained enclosure. Supporting 10, 100, and 1000 Mb/s permits the same physical layer to support supervisory links and high-bandwidth data paths. Integrated line-side termination helps simplify the magnetics-interface area and can lower EMI while saving board space. Before selecting it for an industrial product, verify the exact temperature range, isolation strategy, emissions expectations, and hardware interfaces in the complete manufacturer documentation.
推薦
Managed Network Switch Ports
The VSC8502RD-VR can support 10/100/1000 Mb/s copper ports in space-conscious managed switching equipment. Its integrated line-side termination is useful when board area around each magnetics interface is tightly constrained and can assist with EMI control. The PHY should be paired with manufacturer-recommended Ethernet transformers and laid out with controlled impedance for both 100 Mb/s and 1000 Mb/s operation. Exact parallel-interface behavior, reference clocks, and data-sheet timing must be reviewed before connecting the device to the switching fabric.
推薦
Embedded Communication Gateways
The VSC8502RD-VR is suitable for embedded gateways that bridge local control electronics with an Ethernet network. Its 10, 100, and 1000 Mb/s capability allows designers to support multiple link speeds with a common physical layer, while integrated line-side termination reduces the component burden around the transformer interface. This is useful where enclosure space and EMC performance are both important. Confirm the host interface, supply requirements, operating-temperature limits, and package footprint against the exact datasheet before committing the board layout.
推薦
Networked Test and Measurement Equipment
The VSC8502RD-VR can provide a compact Ethernet connection for test and measurement instruments requiring 10/100/1000BASE-T access. Multi-rate support allows the product to accommodate laboratory computers and management networks operating at different speeds. The integrated line-side termination reduces board-space and EMI pressure around the line interface, which is beneficial in portable or densely packaged instruments. Validation should include checking the recommended magnetics, isolation requirements, copper impedance, and the manufacturer's recommended high-speed layout to preserve reliable link performance.
推薦
IoT Gateways and Edge Nodes
The VSC8502RD-VR is applicable to connected edge nodes that need a wired Ethernet uplink supporting 10, 100, or 1000 Mb/s. Its integrated line-side termination can simplify the physical layer and conserve board area in compact gateways. The common 10/100/1000BASE-T capability also provides deployment flexibility across existing network infrastructure. Use the manufacturer reference circuit to select compatible magnetics and decoupling, then verify thermal, supply, interface-mode, and footprint requirements in the complete datasheet before production release.
推薦
推薦產品摘要
工程參考資料,適用於 VSC8502RD-VR — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | VSC8502RD | VSC8502EV | VSC8502XML |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Ethernet Data Rates | 10/100/1000 Mb/s | 10/100/1000 Mb/s | 10/100/1000 Mb/s | 10/100/1000 Mb/s |
| Supported Physical Layer | 10/100/1000BASE-T | 10/100/1000BASE-T | 10/100/1000BASE-T | 10/100/1000BASE-T |
| Integrated Line-Side Termination | Yes | Yes | Yes | Yes |
| Primary Application | Space-constrained 10/100/1000BASE-T equipment | Space-constrained 10/100/1000BASE-T equipment | Space-constrained 10/100/1000BASE-T equipment | Space-constrained 10/100/1000BASE-T equipment |
| Ordering Suffix | RD-VR | RD | EV | XML |
主要差異化特點
- Integrated line-side termination reduces the magnetics-interface component burden (對比VSC8502RD)
- Multi-rate copper Ethernet support in one physical layer (對比VSC8502EV)
- Space and EMI benefit from integrated termination (對比VSC8502XML)
設計說明
Use the manufacturer reference layout for the PHY-to-magnetics differential pairs. Keep the 10/100/1000BASE-T traces short, impedance controlled, and continuously referenced to a solid ground plane. Avoid introducing stubs or changing layer transitions beneath the interface area. Because the VSC8502 family integrates line-side termination, preserve the specified placement and spacing of the magnetics and termination network rather than duplicating or rearranging it experimentally.
Integrated line-side termination can lower EMI and reduce board area, but the Ethernet magnics and connector still require controlled layout. Follow the recommended transformer pin orientation, isolation spacing, and copper keepout rules. Check both radiated and conducted emissions at the product level because PHY integration alone does not replace proper grounding, filtering, shielding, or enclosure design.
Do not assume that every VSC8502 ordering suffix has the same footprint, temperature grade, or delivery format. Compare the exact package drawing, pin-description table, electrical limits, and ordering information for VSC8502RD-VR and any proposed substitute. In particular, confirm that the host interface, reference-clock arrangement, supply requirements, and exposed-pad connection are unchanged before treating a variant as a drop-in replacement.
Decouple each supply rail at the device with the capacitance and placement specified in the complete datasheet, and provide the required clock or reset behavior before enabling the PHY. Keep switching regulators and high-current digital paths away from the Ethernet differential interface. Verify the system power budget across 10, 100, and 1000 Mb/s operating conditions because link activity and termination behavior can affect current demand.
合規資訊
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were stated for this exact ordering code.