MAX232EIPWR
MAX232EIPWR - 250kbps RS-232 Transceiver | Texas Instruments (Tape & Reel)
The Texas Instruments MAX232EIPWR is a dual RS-232 driver and receiver that provides two data channels at up to 250kbps from a single 5V supply. It uses an on-chip capacitive voltage generator to produce the bipolar TIA/EIA-232-F voltage levels required by RS-232, while the receivers convert remote serial signals to 5V TTL/CMOS logic. The device is available in a 16-pin TSSOP package.
An RS-232 transceiver is an interface IC that bridges the voltage-domain difference between a digital controller and a physical RS-232 link. In the signal hierarchy, the MAX232EIPWR belongs to the RS-232 transceiver class, which combines line drivers, line receivers, and charge-pump voltage generation within one interface package. Unlike a TTL/CMOS serial controller, this device does not implement a communication protocol; it converts logic levels and protects the physical interface.
Key electrical features include 5V operation, dual transmit and receive channels, 250kbps maximum data rate, and approximately ±9V RS-232 output levels. According to the MAX232E product page, all RS-232 pins provide 15kV human-body-model and IEC61000-4-2 air-gap discharge protection. The line-driver pins additionally provide 8kV IEC61000-4-2 contact-discharge protection, making the interface suitable for industrial equipment, service ports, and external cables where electrostatic discharge is a practical concern.
The integrated voltage generator eliminates the need for a separate negative supply rail. Four charge-pump capacitors allow the device to translate TTL/CMOS transmit inputs into RS-232 levels from one 5V supply. Each receiver converts a TIA/EIA-232-F input into a 5V TTL/CMOS signal, allowing a microcontroller, programmable logic controller, or test system to communicate over a legacy serial port without a separate level-shifting circuit.
Typical uses include industrial control-panel service ports, configuration and debug interfaces, laboratory equipment, point-of-sale systems, and legacy peripherals that retain an RS-232 connection. The 250kbps capability supports moderate-rate command and data links, although the connected software protocol must also be configured for the selected baud rate. Because RS-232 is a point-to-point, single-ended interface, ground reference and cable routing remain important in multi-device installations.
For PCB layout, place the charge-pump capacitors and the VCC bypass capacitor close to their associated pins, and route the RS-232 driver and receiver connections directly to the connector. Keep logic-side traces away from exposed cable-facing nets, provide a stable chassis or signal-ground connection strategy, and avoid long unprotected stubs. The integrated ESD protection reduces connector-side risk but does not eliminate the need for good mechanical grounding and cable management.
This page consolidates the verified MAX232E electrical characteristics, ordering information, protection ratings, application guidance, and interface design considerations into a practical engineering reference. It also distinguishes the MAX232EIPWR from related MAX232 and MAX3232E family members so engineers can assess pin compatibility, supply voltage, data rate, and package differences before approving a substitution.
詢價
聯絡我們