BTF3050TEATMA1 vs BTS51202EKAXUMA1 比較

詳細並排比較 BTF3050TEATMA1 由 Infineon 與 BTS51202EKAXUMA1 由 Infineon. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Infineon
BTF3050TEATMA1 BTF3050TEATMA1 - 3A 12V HITFET+ Low-Side Switch | Infineon

BTF3050TEATMA1 - 3A 12V HITFET+ Low-Side Switch | Infineon

BTF3050TEATMA1 ✓ 啟用中

規格比較

參數 BTF3050TEATMA1 BTS51202EKAXUMA1
品牌 Infineon Infineon
類別 Power MOSFET Drivers Power MOSFET Drivers
生命週期狀態 啟用中 啟用中
Switch Type N-Channel Low-Side Power Switch —
輸出配置 1:1 (Single channel) —
Continuous Drain Current (ID) 3 A —
On-Resistance (RDS(on)) Max 100 mOhm —
Current Limit (Internal) 30 A —
Logic Input Voltage (Vcc) 3.0 V to 5.5 V —
Logic Input Compatibility 3.3 V / 5 V CMOS —
Turn-On Time Max 15 us —
Turn-Off Time Max 30 us —
Adjustable Slew Rate Yes (SR pin) —
ESD Protection Yes (on-chip) —
工作溫度範圍 -40 C to +150 C —
封裝 PG-TO252-5-11 (DPAK-5) PG-DSO-14-40-EP (14-pin SOIC with exposed pad)
安裝類型 Surface Mount (DPAK tab) Surface Mount
Automotive Qualification AEC-Q100 qualified —
Family HITFET+ (low-side) —
RoHS 狀態 Compliant Compliant
Lead-Free Yes —
拓撲 — Dual High-Side Switch (2 channels)
Technology — Smart6 (N-channel vertical MOSFET with charge pump)
Number of Channels — 2
On-State Resistance (RDS(on)) — 120 mΩ (typical per channel)
Continuous Output Current — 2 A per channel (typical 2.5 A)
Operating Voltage (Vbb) — 8 V to 18 V
Load Type — Lamps up to 1×10 W, LEDs, resistive/inductive loads
工作溫度 — -40 °C to +150 °C
Maximum Power Dissipation — 1800 mW
Integrated Protection — Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery
Diagnostic Output — Yes (status feedback pin)
Charge Pump — Integrated
Automotive Qualified — Yes

資料表與資源

瀏覽所有產品 建立 BOM 索取報價