EP1810LI-35 vs EP1810LI-45 比較
詳細並排比較 EP1810LI-35 由 Altera 與 EP1810LI-45 由 Rochester Electronics. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
Rochester Electronics
EP1810LI-45 - Classic EPLD, 900 Gates, 48 Macrocells, 45ns, PQCC68 | Rochester Electronics (Altera)
EP1810LI-45 ✓ 啟用中規格比較
| 參數 | EP1810LI-35 | EP1810LI-45 |
|---|---|---|
| 品牌 | Altera | Rochester Electronics |
| 類別 | FPGA & CPLD | FPGA & CPLD |
| 生命週期狀態 | Obsolete | 啟用中 |
| Manufacturer | Rochester Electronics, LLC (original Altera design) | Rochester Electronics (licensed continuation of Altera / Intel PSG Classic EPLD line) |
| Part Family | Altera Classic EPLD | — |
| Device Type | Erasable Programmable Logic Device (EPLD) | — |
| Macrocells | 48 | 48 |
| Propagation Delay (tPD) | 35 ns | — |
| Speed Grade | 35 (slowest in EP1810L family) | — |
| 封裝 | 68-pin PLCC (J-Lead, plastic) | 68-pin PLCC / PQCC68 (J-Lead) |
| Pin/Package Code | PLCC-68 / PQCC68 | — |
| Technology | CMOS, UV-erasable EPROM configuration cell | CMOS, UV-erasable EPROM configuration |
| 供應電壓 | 5 V (TTL-compatible I/O) | 5 V |
| 工作溫度 | -40 C to +85 C (industrial, 'I' suffix) | — |
| 安裝類型 | Surface Mount (PLCC socket compatible) | — |
| JTAG Boundary Scan | IEEE 1149.1 compliant | — |
| Logic Elements | Logic Array Blocks (LABs) connected via Programmable Interconnect Array (PIA) | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| Lead-Free | [DATA_NEEDED: lead-free status] | — |
| MSL 等級 | [DATA_NEEDED: MSL rating] | — |
| Product Type | — | EPLD (Erasable Programmable Logic Device) |
| Family | — | Altera Classic |
| Usable Gates | — | 900 |
| Maximum User I/O | — | 64 inputs / 48 outputs |
| Pin-to-Pin Logic Delay (tPD) | — | 45 ns |
| Counter Frequency (fCNT) | — | up to 100 MHz |
| Setup Time (tSU) | — | [DATA_NEEDED: setup time] |
| 工作溫度範圍 | — | -40 C to +85 C (Industrial, 'I' suffix) |
| Logic Blocks | — | 12 LABs of 4 macrocells each |
| Configuration Memory | — | Non-volatile UV-erasable EPROM |
| Programming Method | — | Altera programming hardware with MAX+PLUS II / legacy tools |