EPC2LI20 vs EPC1LI20 比較
詳細並排比較 EPC2LI20 由 Altera 與 EPC1LI20 由 Altera. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | EPC2LI20 | EPC1LI20 |
|---|---|---|
| 品牌 | Altera | Altera |
| 類別 | Memory ICs | Memory ICs |
| 生命週期狀態 | NRND | Obsolete |
| 記憶體容量 | 1.6 Mb (1,572,864 bits) | 1 Mb (1,048,576 bits) |
| 記憶體類型 | Flash (in-system programmable) | OTP Configuration PROM (EPROM-based) |
| Programmable Type | In System Programmable (ISP) | — |
| 功能 | Configuration PROM for SRAM-based FPGAs | — |
| Supply Voltage - Operating | 3.0 V to 3.6 V and 4.5 V to 5.5 V (auto-sensing) | — |
| 工作溫度 | -40 C to +85 C (Industrial) | [DATA_NEEDED: operating temperature range] |
| 封裝 / 外殼 | 20-PLCC (J-lead, 9x9 mm) | — |
| 安裝類型 | Surface Mount (PLCC socket-compatible) | Surface Mount (PLCC socket compatible) |
| Configuration Interface | Serial or Byte-wide (parallel) | Altera Passive Serial / Altera Active Serial / JTAG (IEEE 1149.1) |
| Decompression | On-chip (supports compressed bitstreams) | — |
| JTAG / ISP Interface | IEEE 1532 (TCK, TMS, TDI, TDO) | — |
| Multi-Device Support | Yes (daisy-chain configuration) | — |
| User-Accessible Memory | Yes (unused flash available to user logic) | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status - original Altera part may be non-RoHS SnPb finish] |
| MSL 等級 | [DATA_NEEDED: MSL level] | 1 (per Partstack datasheet record) |
| Maximum Configuration Clock | — | 8 MHz |
| Supply Voltage (VCC) | — | 5.0 V (4.75 V to 5.25 V) |
| Programming Voltage (VPP) | — | 12.75 V (typical, factory-programmed via JTAG) |
| 封裝 | — | 20-pin PLCC (J-lead, 9x9 mm) |
| 腳位數 | — | 20 |
| Cascading Support | — | Yes (nCASC pin for multi-device daisy chain) |
| Endurance | — | OTP (one-time programmable, 1000 erase-equivalent UV cycles for pre-program erase) |
| JTAG Programming | — | Yes (in-system via IEEE 1149.1) |
| Compatible FPGA Families | — | FLEX 8000, FLEX 10K, ACEX 1K, APEX 20K, Mercury |