EPC2TC32UCF48 vs EPC2T32UCAF48 比較
詳細並排比較 EPC2TC32UCF48 由 Intel 與 EPC2T32UCAF48 由 Intel. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | EPC2TC32UCF48 | EPC2T32UCAF48 |
|---|---|---|
| 品牌 | Intel | Intel |
| 類別 | Memory ICs | Memory ICs |
| 生命週期狀態 | NRND | 啟用中 |
| 記憶體類型 | Non-volatile configuration PROM (CMOS Flash-based) | — |
| Memory Density | 1.6 Mbit (1.6 Mb / 32 Mbit raw) | — |
| Memory Configuration | Serial configuration bitstream storage | — |
| Supply Voltage (VCC) | 3.0 V to 3.6 V (3.3 V typical) | — |
| Supply Voltage (VCCIO) | 1.8 V / 2.5 V / 3.3 V (bank-level) | — |
| Output Drive Current (VCCIO) | [DATA_NEEDED: IOH/IOL at 3.3 V VCCIO] | — |
| Programming Interface | IEEE Std. 1149.1 JTAG (in-system programmable) | — |
| Configuration Interface | Altera serial PROM interface (DCLK, DATA, nCONFIG, nSTATUS, CONF_DONE) | — |
| Supported Configuration Modes | FPP, AS, PS, JTAG (mode dependent on target FPGA MSEL pins) | — |
| Daisy Chain Support | Yes (multi-device cascade for >16 Mbit FPGAs) | — |
| Maximum Cascaded Capacity | Up to 16 Mbit total across chain | — |
| 工作溫度 | 0C to +70C (commercial) | [DATA_NEEDED: operating temperature range] |
| 封裝 | 48-pin TQFP (7x7 mm) | QFP-48 (CAF48) |
| 安裝類型 | Surface Mount | Surface Mount |
| MSL 等級 | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL rating] |
| RoHS 狀態 | [DATA_NEEDED: confirm RoHS compliance] | [DATA_NEEDED: RoHS compliance] |
| Lead Free | [DATA_NEEDED: confirm lead-free] | — |
| Device Type | — | Configuration PROM for SRAM-based FPGAs |
| Memory Capacity | — | 32 Mbit |
| 介面 | — | Serial / Parallel configuration; JTAG (IEEE 1149.1) ISP |
| 供應電壓 | — | 3.0 V to 3.6 V (3.3 V typical) |
| Configuration Modes | — | Serial, Parallel (8/16-bit) |
| JTAG Interface | — | 4-wire (TMS, TCK, TDI, TDO) |
| Cascade Support | — | Yes (nCASC pin for multi-device chains) |
| Process Technology | — | CMOS non-volatile memory |
| Manufacturer | — | Intel (formerly Altera) |
| Series | — | EPC2 (Enhanced Configuration Device) |