INA125U vs AD623ANZ 比較
詳細並排比較 INA125U 由 Texas Instruments 與 AD623ANZ 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | INA125U | AD623ANZ |
|---|---|---|
| 品牌 | Texas Instruments | Analog Devices |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Instrumentation amplifier with precision voltage reference | Instrumentation amplifier |
| Channel Count | 1 circuit | — |
| Supply Voltage Range | 2.7 V to 36 V | 2.7 V to 12 V |
| Maximum Supply Voltage | 36 V | — |
| Gain Range | 4 V/V to 10,000 V/V | — |
| Gain Setting | Single external resistor | — |
| 靜態電流 | 460 µA | — |
| Input Offset Voltage | 250 µV maximum | — |
| Input Offset Drift | 2 µV/°C maximum | — |
| Voltage Reference | 10 V | — |
| Gain Error | [DATA_NEEDED: gain error] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection ratio] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Bandwidth | 150 kHz | — |
| Noise at 1kHz | 38 nV/√Hz typical | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Sleep Mode | Yes | — |
| 封裝 | 16-pin SOIC | 8-PDIP |
| 安裝類型 | Surface mount | — |
| 工作溫度 | [DATA_NEEDED: operating temperature range] | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | Unknown |
| REACH Status | [DATA_NEEDED: REACH status] | Unknown |
| Number of Circuits | — | 1 circuit |
| Single-Supply Configuration | — | 3 V to 12 V |
| Dual-Supply Operation | — | Supported |
| Output Swing | — | Rail-to-rail |
| Gain Programming | — | Single external gain-set resistor |
| Lead Count | — | 8 leads |
| Input Signal | — | Differential |
| Common-Mode Handling | — | Instrumentation-amplifier input |
| Power Class | — | Low-cost, low-power instrumentation amplifier |
| Product Class | — | Rail-to-rail instrumentation amplifier |
| Pin Configuration | — | Industry-standard 8-lead instrumentation-amplifier configuration |
| AEC-Q100 Qualification | — | Not applicable |
| 工作溫度範圍 | — | [DATA_NEEDED: operating temperature range] |
| Gain Bandwidth | — | [DATA_NEEDED: gain bandwidth] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |