ST485CDR vs SN75176BDR 比較

詳細並排比較 ST485CDR 由 STMicroelectronics 與 SN75176BDR 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

STMicroelectronics
ST485CDR ST485CDR - 2.5Mbps Low-Power RS-485/RS-422 Transceiver SOIC-8 | ST

ST485CDR - 2.5Mbps Low-Power RS-485/RS-422 Transceiver SOIC-8 | ST

ST485CDR ✓ 啟用中
Texas Instruments
SN75176BDR SN75176BDR - 8-Pin RS-485/RS-422 Transceiver | TI

SN75176BDR - 8-Pin RS-485/RS-422 Transceiver | TI

SN75176BDR ✓ 啟用中

規格比較

參數 ST485CDR SN75176BDR
品牌 STMicroelectronics Texas Instruments
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
功能 Transceiver —
Protocol RS-422, RS-485 —
Number of Drivers/Receivers 1/1 —
Duplex Half —
資料速率 2.5 Mbps —
供應電壓 4.75 V to 5.25 V 5 V
Supply Current (unloaded, drivers disabled) 300 uA typical —
Common-Mode Range (bus pins) -7 V to +12 V —
Receiver Input Hysteresis 70 mV typical —
工作溫度 0C to +70C (C grade) —
封裝 SOIC-8 SOIC (D), 8 pins
安裝類型 Surface Mount Surface mount
Driver Short-Circuit Protection Yes, current-limited —
過熱關機 Yes —
ESD Protection (bus pins) [DATA_NEEDED: ESD rating] —
RoHS 狀態 Compliant [DATA_NEEDED: RoHS status]
Product Type — Differential bus transceiver
Supported Standards — TIA/EIA-422-B and TIA/EIA-485-A
ITU Recommendations — V.11 and X.27
Communication Mode — Bidirectional
Bus Architecture — Multipoint transmission
Transmission Line Type — Balanced transmission lines
Driver Output State — 3-state
Receiver Output State — 3-state
工作溫度範圍 — 0 °C to 70 °C
腳位數 — 8 pins
Manufacturer — Texas Instruments
REACH Status — [DATA_NEEDED: REACH status]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification]
Maximum Data Rate — [DATA_NEEDED: maximum data rate]
Input and Output Electrical Limits — [DATA_NEEDED: input and output electrical limits]
Propagation Delay — [DATA_NEEDED: propagation delay]
靜態電流 — [DATA_NEEDED: quiescent current]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價