A3P250-FG256 - 3KLE ProASIC3 Flash FPGA | Microchip
MPN: A3P250-FG256 ✓ 啟用中A3P250-FG256 概覽
A ProASIC3 FPGA belongs to the programmable-logic hierarchy: FPGA → field-programmable gate array → programmable logic device → semiconductor. Unlike mask-programmed custom logic, a flash-based FPGA can be reconfigured in the field with stored programming data. This makes it useful when designs need configurable logic, downloadable firmware, field updates, or a bridge between prototype development and production hardware.
The A3P250 family provides up to 144 kbits of true dual-port SRAM, up to 300 user I/Os across family members, and configurable logic built around three-input lookup-table equivalents and flip-flop/latch resources. A3P250-FG256 specifically provides 157 user I/Os and 36,864 bits of associated device data in its catalog description. Its reprogrammable flash technology supports nonvolatile configuration and deterministic field updates.
The device is manufactured using a 130 nm, seven-layer metal flash-based CMOS process with six copper layers. This process combines embedded nonvolatile memory with programmable logic in one package. The A3P250-FG256 is positioned as an ultra-low-density ProASIC3 option for designs requiring moderate logic density, numerous I/Os, and a compact 256-ball package rather than a very large high-density FPGA.
Typical uses include industrial control interfaces, data-acquisition equipment, communications equipment, embedded protocol bridges, and compact control modules. Its 157 I/Os allow direct connection to sensors, converters, memories, transceivers, and discrete digital components. Designers should still confirm each ball assignment and voltage compatibility in the manufacturer pin table before finalizing a PCB footprint.
The principal design consideration is power and I/O planning. Place the 1.425 V to 1.575 V core supply exactly as specified, use the manufacturer's recommended decoupling arrangement, and assign I/O standards that satisfy the selected bank’s voltage and interface limits. Program the device with the supported development environment, verify timing after placement and routing, and validate power-up behavior in the final system.
This page combines the verified device identity, package information, operating limits, structured comparisons, drop-in candidates, application guidance, and practical implementation notes. It helps engineers identify whether the A3P250-FG256 fits an existing 256-LBGA design before requesting a quote for production planning.
直接替換替代品,適用於 A3P250-FG256 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: A3P250-FG256 (相同外形與佔位) — 差異在於 Device Type, Core Supply Voltage, Package, Process Technology.
A3P250-FGG256I
✅ 直接替換📋 參考替代品(不在目錄中)
A3P250-2FG256
✅ 直接替換聯絡詢價
查看資料表 →A3P250-2FGG256
✅ 直接替換📋 參考替代品(不在目錄中)
A3P250L-FG256
✅ 直接替換聯絡詢價
查看資料表 →A3P250-FG256 最大額定值與電氣特性
| Device Type | ProASIC3 flash-based FPGA |
| Logic Elements | Approximately 3K logic elements |
| Number of Gates | 250,000 gates |
| User I/O Count | 157 I/Os |
| True Dual-Port SRAM | Up to 144 kbits |
| Device Data | 36,864 bits |
| Core Supply Voltage | 1.425 V to 1.575 V |
| Process Technology | 130 nm CMOS |
| Metal Layer Count | 7 layers with 6 copper layers |
| Programmable Storage | Reprogrammable nonvolatile flash |
| Logic Resource | Three-input lookup-table equivalent |
| Sequential Logic | D flip-flop or latch with enable |
| 封裝 | 256-LBGA, 17 mm × 17 mm |
| 安裝類型 | Surface mount |
| 工作溫度 | 0°C to 85°C junction temperature |
| Packaging | Tray |
| Manufacturer Lead Time | 10 weeks |
| RoHS 狀態 | RoHS non-compliant |
A3P250-FG256 256-lbga, 17 mm × 17 mm 腳位配置指南
A3P250-FG256(256-lbga, 17 mm × 17 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: A3P250-FG256.
請參閱 資料表 以查看完整腳位配置。
典型應用
A3P250-FG256 適用於 6 應用s: Industrial Control and Automation, Data-Acquisition Equipment, Communications Interface Bridge, Embedded Programmable Control, Test and Measurement Instrumentation, Embedded Security and Access Control.
Industrial Control and Automation
The A3P250-FG256 fits compact industrial controllers that must combine configurable logic with numerous sensor and actuator connections. Its 157 user I/Os provide substantial interface capacity without moving to a much larger FPGA package, while approximately 3K logic elements support sequencing, state machines, communications supervisory logic, and data handling. The device’s 1.425 V to 1.575 V core range requires a stable supply, and its 0°C to 85°C junction-temperature specification suits controlled equipment enclosures. Flash-based configuration supports field updates, but the final design should validate timing, I/O voltage domains, reset behavior, and brownout recovery under worst-case industrial supply variation.
推薦
Data-Acquisition Equipment
A3P250-FG256 is suitable for data-acquisition front ends requiring parallel digital control, acquisition sequencing, buffering, and programmable signal-path logic. The 157 user I/Os can connect converters, sensor conditioning circuits, memory devices, and status signals, while up to 144 kbits of true dual-port SRAM across the family supports localized data handling. Approximately 250,000 gates provide enough capacity for control and interface functions without a large FPGA. Designers should assign I/O standards to the correct voltage banks, account for input slew and output timing, and verify acquisition timing with the selected converters before finalizing the PCB and pin constraints.
推薦
Communications Interface Bridge
The A3P250-FG256 can implement compact protocol bridges and communications line-card interface logic when the design requires numerous discrete digital signals alongside moderate programmable logic. Its 157 I/Os allow connection to transceivers, memories, status indicators, and control processors, while the 3KLE-class fabric is appropriate for framing, filtering, buffering, and protocol conversion. The flash-based configuration supports downloadable updates in deployed equipment. High-speed interfaces still require disciplined PCB routing, controlled-impedance review, series termination where specified, and timing closure after place-and-route. Confirm every external interface voltage against the applicable I/O bank before applying power.
推薦
Embedded Programmable Control
A3P250-FG256 fits embedded control modules where deterministic configurable logic must coordinate sensors, memory, communications, and actuators. Approximately 3K logic elements can implement control state machines, protocol sequencing, alarm logic, and timing functions, while 157 I/Os reduce the need for external glue logic. Nonvolatile flash configuration allows the same hardware platform to be updated for product variants or field corrections. The principal trade-off is that a programmable-logic design requires constraint development, timing verification, and careful reset and power-sequencing review. Use the supported Libero workflow and test startup, configuration, and recovery behavior across the full operating range.
推薦
Test and Measurement Instrumentation
The A3P250-FG256 is appropriate for modular test and measurement instruments where flexible control logic must coordinate several front-end functions. Its 157 user I/Os can support instrument buses, display and keypad control, trigger routing, status indicators, and external converters. The programmable fabric permits reusable hardware across different instrument models, while the compact 17 mm × 17 mm 256-LBGA package preserves board area. Engineers should reserve clean routing for sensitive measurement-control signals, isolate switching supplies from analog sections, and confirm timing margins for trigger and handshake paths. Verify thermal behavior and configuration integrity before production release.
推薦
Embedded Security and Access Control
A3P250-FG256 can implement compact security, access-control, and keypad-based system logic where configurable behavior and field updates are valuable. Approximately 250,000 gates and 157 I/Os support credential-input handling, lock sequencing, alarm logic, display control, and communications supervision. Flash-based configuration permits controlled firmware or bitstream updates across a product fleet, although application-level security must be designed separately. The engineer should verify boot and update pathways, prevent unauthorized configuration access, account for configuration pin states during reset, and validate system behavior under power loss. A3P250-FGG256I is the relevant ordering option when the environmental requirement calls for the industrial-temperature grade.
推薦
推薦產品摘要
工程參考資料,適用於 A3P250-FG256 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | A3P250-FGG256I | A3P250-2FG256 | A3P250-2FGG256 | A3P250L-FG256 |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 256-LBGA (17 mm × 17 mm) | 256-LBGA (17 mm × 17 mm) | FG256 package | FGG256 package | 256-LBGA (17 mm × 17 mm) |
| FPGA Family | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3L |
主要差異化特點
- Matches the A3P250-FGG256I package and 3KLE resource class while offering the industrial ordering path (對比A3P250-FGG256I)
- Provides an explicit speed-grade-2 migration path within the ProASIC3 family (對比A3P250-2FG256)
- Combines speed grade 2 and industrial-temperature ordering in one FG256-family option (對比A3P250-2FGG256)
- Stays with the original ProASIC3 architecture instead of moving to ProASIC3L (對比A3P250L-FG256)
設計說明
Design the core rail to remain within the specified 1.425 V to 1.575 V range, including startup droop and load-transient excursions. Place the manufacturer-recommended high-frequency bypass capacitors directly at the power and ground balls, use short and wide supply paths, and keep switching-regulator loops away from sensitive configuration or interface areas. Estimated: average core power equals 1.5 V multiplied by measured core current, but no current estimate is possible without utilization-dependent power data.
Use the manufacturer’s 256-ball package drawing and land pattern rather than a generic BGA footprint. Verify ball pitch, pad diameter, solder-mask definition, and thermal-via arrangement against the controlled package documentation. Preserve access for inspection and rework, avoid copper obstructions under the device unless the package design permits them, and account for board warpage during large 17 mm × 17 mm reflow cycles.
Do not treat a shared FG256 or 256-LBGA package designation as proof that every configuration is automatically interchangeable. The ordering code can alter temperature grade, speed grade, or family behavior. Before substitution, compare the complete manufacturer ordering information, pin description, electrical limits, timing tables, configuration pins, and programming-device compatibility. A3P250L-FG256 requires particular caution because ProASIC3L is a different family branch from ProASIC3.
Assign external interface standards only after determining each I/O bank’s allowed voltage range. Add source-series termination where recommended for high-speed signals, maintain adequate spacing between opposing-edge nets, and avoid routing clocks, configuration pins, or sensitive controls beneath switching power components. Review input slew, output delay, and bus timing with actual external-device loading rather than relying only on the FPGA timing report.
Separate configuration, clock, JTAG, and functional interface routing into clear logic groups even when the design is small. Keep programming and debug access unobstructed for production test, use a stable clock source with conservative routing, and document test points for configuration, reset, and supply rails. This makes boundary-scan, board bring-up, and field diagnostics more repeatable while reducing accidental configuration errors.
合規資訊
The manufacturer product listing identifies A3P250-FG256 as RoHS non-compliant. No additional compliance claims are established for Reach, lead-free construction, halogen-free construction, or conflict minerals.