A42MX24-2PQG160I - 36K Gate 5V FPGA 160-PQFP | Microchip
MPN： A42MX24-2PQG160I ✓ 啟用中A42MX24-2PQG160I 概覽
A field-programmable gate array (FPGA) is a semiconductor device containing a matrix of configurable logic blocks (CLBs) and programmable interconnects that designers configure after manufacturing. The MX family belongs to the antifuse FPGA category, meaning its interconnect is one-time programmable and retains configuration at power-up without an external configuration ROM - a key reliability advantage over SRAM-based FPGAs. FPGAs sit above CPLDs and below ASICs in the integration hierarchy and serve as a single-chip ASIC alternative for legacy PLD consolidation.
Key features include MultiPlex I/Os supporting mixed-voltage 5.0V and 3.3V systems, programmable PCI operation fully compliant with the PCI Local Bus Specification version 2.1, and a low-power mode. The 0.45um CMOS process delivers dependable, single-chip, high-volume operation at low cost.
The antifuse architecture provides inherent resistance to configuration upsets, making the A42MX24 well suited to industrial control, legacy system sustainment, high-reliability embedded logic, and military/defense retrofit programs where 5V compatibility is mandatory.
Designers should note that the antifuse fabric is one-time programmable, so design iteration requires new devices; plan programming yields accordingly. Verify 114.75MHz-class timing closure against the DS2136 datasheet for your speed grade.
直接替換替代品，適用於 A42MX24-2PQG160I — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： A42MX24-2PQG160I （相同外形與佔位） — 差異在於 Package, Family, Speed Grade, System Gates, Supply Voltage.
A42MX24-PQG160I
✅ 直接替換📋 參考替代品（不在目錄中）
A42MX24-2PQG160M
✅ 直接替換📋 參考替代品（不在目錄中）
A42MX24-2PQ160I
✅ 直接替換📋 參考替代品（不在目錄中）
A42MX24-PQ160I
✅ 直接替換聯絡詢價
查看資料表 →A42MX24-2PQG160I 最大額定值與電氣特性
| Family | 42MX (MX FPGA) |
| System Gates | 36000 gates |
| Logic Cells / CLBs | 912 |
| User I/Os | 125 |
| Process Technology | 0.45 um CMOS |
| 供應電壓 | 3.3V / 5V (mixed-voltage) |
| Architecture | Antifuse (one-time programmable) |
| Speed Grade | -2 |
| 封裝 | 160-Pin PQFP (BQFP), 0.65 mm pitch |
| 安裝類型 | Surface Mount |
| 工作溫度 | -40C to +85C (Industrial, I suffix) |
| PCI Compliance | PCI Local Bus Specification v2.1 |
| Low Power Mode | Yes |
| Configuration Storage | Non-volatile (no external ROM needed) |
| Lead Free / RoHS | Lead free (G suffix, LEAD FREE) |
A42MX24-2PQG160I 腳位配置
| 腳位 1-40 | I/O / Cluster I/O — User programmable I/O banks (MultiPlex I/O, 3.3V/5V) |
| 腳位 [per JEDEC S-PQFP-G160] | VDD — Core supply (5V nominal) - multiple pins [DATA_NEEDED: exact pin numbers] |
| 腳位 [per JEDEC S-PQFP-G160] | GND — Ground - multiple pins [DATA_NEEDED: exact pin numbers] |
| 腳位 [DATA_NEEDED] | CLKA / CLKBLK — Dedicated clock inputs [DATA_NEEDED: exact pin numbers] |
| 腳位 [DATA_NEEDED] | FPGA_RESET — Global reset [DATA_NEEDED: exact pin numbers] |
典型應用
A42MX24-2PQG160I 適用於 6 應用s: Legacy 5V PLD Consolidation, Industrial Control and Automation, PCI Bus Interface Logic, Defense and Avionics Sustainment, High-Reliability Embedded Logic, ASIC Prototyping and Bridge Logic.
Legacy 5V PLD Consolidation
The A42MX24-2PQG160I is purpose-built for integrating multiple legacy 5V PLDs, PALs, and GALs into a single 36K-gate chip. Its native 5.0V architecture means no level shifters or dual-rail power trees are needed when replacing older 5V glue logic, and MultiPlex I/Os directly interface 5.0V and 3.3V domains. The antifuse fabric powers up instantly configured, matching the behavior of the ROM-less legacy devices it replaces. In sustainment programs, one A42MX24 typically replaces 5-15 TTL/PLD packages, cutting board area and failure points while preserving proven 5V system timing.
推薦
Industrial Control and Automation
In industrial controllers, motor-drive interface logic, and factory automation backplanes, the A42MX24-2PQG160I provides deterministic, one-time-programmed logic immune to configuration corruption from power glitches - a known weakness of SRAM FPGAs on noisy industrial floors. The industrial temperature rating of -40C to +85C covers unconditioned cabinets and cold-start environments. The PCI Local Bus v2.1 compliance allows direct attachment to industrial PC backplanes, and the low-power mode reduces cabinet heat. Antifuse non-volatility also removes configuration load time, so control logic is active immediately at power-up.
推薦
PCI Bus Interface Logic
The A42MX24 is fully compliant with the PCI Local Bus Specification version 2.1 and offers programmable PCI I/O characteristics, making it a natural host for custom PCI interface cores in 33MHz systems. MultiPlex I/Os can be programmed for PCI-compliant drive and slew at both 5.0V and 3.3V signaling, letting one design serve both bus voltage environments. With 125 user I/Os, a single device implements the PCI state machine plus target application logic such as FIFOs and register files. Implementing PCI in antifuse fabric avoids SRAM configuration security concerns in commercial equipment.
推薦
Defense and Avionics Sustainment
Legacy defense and avionics platforms standardized on the Actel MX family because antifuse FPGAs tolerate radiation-induced configuration upsets and provide instant-on, single-chip operation without boot devices. The A42MX24-2PQG160M variant (military range) shares this die for programs needing extended qualification. For depot-level sustainment of radar interfaces, mission-data encoders, and 1553 glue logic built on 5V architecture, the A42MX24-2PQG160I keeps obsolete designs manufacturable. The 0.45um process is well characterized, and design files in Libero remain compatible for re-programming new devices.
推薦
High-Reliability Embedded Logic
Applications that cannot tolerate configuration corruption - medical device control logic, test-equipment sequencers, and security systems - benefit from the one-time-programmed antifuse fabric of the A42MX24-2PQG160I. Unlike SRAM FPGAs, there is no bitstream to intercept or corrupt, providing inherent design-security and failure-mode advantages. The 36K-gate capacity handles state machines, counters, bus bridges, and custom peripherals, while 125 I/Os interface mixed 3.3V/5V subsystems. Instant power-up configuration simplifies watchdog and Brown-out recovery design, since logic is functional within microseconds of power application.
推薦
ASIC Prototyping and Bridge Logic
Before committing to ASIC tape-out or while an ASIC is in fabrication, the A42MX24-2PQG160I serves as a low-cost prototyping and system-bridge device for modest gate counts. Microchip positions MX explicitly as a single-chip ASIC alternative for high-volume, cost-sensitive designs where a full ASIC is not economical. The antifuse fabric delivers ASIC-like deterministic timing without reconfiguration latency, and the 160-pin PQFP is inexpensive to assemble. Engineers can validate RTL, interface real 5V peripherals, and ship bridge logic while iterating on the target ASIC design.
推薦
推薦產品摘要
工程參考資料，適用於 A42MX24-2PQG160I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | A42MX24-PQG160I | A42MX24-2PQG160M | A42MX24-2PQ160I | A42MX36-PQG208I |
|---|---|---|---|---|---|
| Package | 160-PQFP (BQFP), 0.65 mm | 160-PQFP (BQFP) - same | 160-PQFP (BQFP) - same | 160-PQFP - same footprint, leaded finish | 208-PQFP - different |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 36,000 | 36,000 | 36,000 | 36,000 | Higher (42MX36 family) |
| User I/Os | 125 | 125 | 125 | 125 | Up to 202 (family max) |
| Speed Grade | -2 | Standard | -2 | -2 | -1 |
| Temperature Range | -40C to +85C (Industrial) | -40C to +85C | Military range | -40C to +85C | -40C to +85C |
| Supply Voltage | 3.3V / 5V | 3.3V / 5V | 3.3V / 5V | 3.3V / 5V | 3.3V / 5V |
| Lead Finish | Lead free (G) | Lead free (G) | Lead free (G) | Leaded | Lead free (G) |
主要差異化特點
- One-time-programmed non-volatile fabric (對比SRAM-based FPGAs (Xilinx/Altera))
- Native 5.0V mixed-voltage architecture (對比Modern FPGAs (1.2-2.5V only))
- Speed grade -2 performance vs standard grade (對比A42MX24-PQG160I)
設計說明
The A42MX24 operates from a 5V core with 3.3V/5V MultiPlex I/O banks. Decouple each VDD/GND pin pair with 0.1uF ceramic capacitors placed within 5 mm of the pin, plus bulk 10uF per rail. Mixed-voltage systems must ensure 3.3V banks are powered before 5V I/O drivers drive them, or use I/O bank grouping to respect the datasheet power-up ordering.
The antifuse fabric is one-time programmable - there is no reflow-and-retry. Budget 15-25% spare devices per programming session for yield loss, and lock your design in Libero before ordering. Also remember the -2 speed grade timing is faster than standard grade: swapping in a standard-grade A42MX24-PQG160I requires full static timing re-verification even though the footprint is identical.
Programmable PCI I/O requires attention to drive strength and slew settings on the PCI bus. When using MultiPlex I/Os at 5.0V with PCI v2.1 compliance, follow the 40MX/42MX datasheet DS2136 PCI implementation section for output timing parameters. Keep 160-PQFP lead-length stubs short on the PCI bus; series termination resistors (22-33 ohm) are typically needed on clock and high-fanout nets.
合規資訊
G suffix denotes lead-free package; distributor listings mark part as LEAD FREE. REACH/halogen/conflict-minerals status not stated in provided data.
