AD602ARZ - Dual Low-Noise Variable Gain Amplifier | Analog Devices
MPN: AD602ARZ ✓ 啟用中AD602ARZ 概覽
A variable gain amplifier is an amplifier whose gain can be controlled electronically through an external control voltage or interface. Within the signal-chain hierarchy, the AD602ARZ belongs to the variable gain amplifier class, which combines low-noise amplification with programmable gain control. It is intended for applications in which received signals vary over a wide dynamic range and must be normalized before measurement, digitization, or further processing.
The AD602ARZ supports independent control of its two channels, allowing left- and right-side signal paths or separate measurement channels to be adjusted with matched circuitry. Its low-noise design helps preserve weak signals and improves the useful dynamic range of downstream receivers. Its wideband architecture also makes it suitable for systems that need amplification beyond audio frequencies while maintaining controlled distortion and gain behavior.
Analog Devices identifies the AD600 and AD602 families as dual-channel, low-noise, wideband variable gain amplifiers optimized for ultrasound imaging systems. The AD602 specifically provides an 11.25 dB to 31 dB gain range according to the manufacturer product description. Each channel uses a high-gain-bandwidth amplifier, and the gain is controlled through a high-impedance, differential gain-control input that supports practical system-level gain adjustment.
Typical applications include ultrasound receiver channels, medical imaging systems, instrumentation requiring variable amplification, and other wideband signal-processing equipment. Because the AD602ARZ contains two independent channels, it can also support dual-axis, stereo, differential, or sequential acquisition systems when the circuit architecture calls for matched amplifier pairs.
When implementing the device, place input and output decoupling components close to the associated pins, maintain the control-input impedance recommended by the manufacturer, and keep sensitive high-impedance gain-control traces short and well guarded. Designers should verify bandwidth, output swing, supply headroom, and noise performance against the signal levels expected at the input of each channel.
This product page combines the manufacturer application description, package and channel configuration, practical design guidance, replacement assessment, and structured comparisons. It is intended to help engineers identify whether the AD602ARZ fits a given signal chain while understanding the distinctions between exact ordering codes, temperature grades, and true electrical replacements.
直接替換替代品,適用於 AD602ARZ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: AD602ARZ (相同外形與佔位) — 差異在於 Package, Product Type, Gain Range, Operating Temperature, Signal Type.
AD602AR
✅ 直接替換聯絡詢價
查看資料表 →AD602ARZ-R7
✅ 直接替換📋 參考替代品(不在目錄中)
AD602ARZ-RL
✅ 直接替換📋 參考替代品(不在目錄中)
AD602ARZ 最大額定值與電氣特性
| Product Type | Dual variable gain amplifier |
| Number of Amplifier Channels | 2 channels |
| Independent Channel Control | 2 independent channels |
| Gain Control Range | 11.25 dB to 31 dB per channel |
| Noise Performance | Low-noise architecture |
| Bandwidth Class | Wideband |
| Signal Type | Dual analog input and output signal channels |
| Primary Application | Ultrasound imaging |
| 封裝 | 16-lead SOIC |
| 腳位數 | 16 pins |
| 安裝類型 | Surface mount |
AD602ARZ 16-lead soic 腳位配置指南
AD602ARZ(16-lead soic 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: AD602ARZ.
請參閱 資料表 以查看完整腳位配置。
典型應用
AD602ARZ 適用於 6 應用s: Ultrasound Receiver Front Ends, Medical Ultrasound Imaging Systems, Dual-Channel Instrumentation, Wideband Signal Conditioning, Test and Measurement Equipment, Low-Noise Analog Signal Chains.
Ultrasound Receiver Front Ends
The AD602ARZ is well suited to ultrasound receiver front ends because each of its two independent channels provides programmable gain from 11.25 dB to 31 dB while maintaining low-noise, wideband amplification. Position one channel on each receive path when matched processing is required, then control the gain to compensate for changes in tissue attenuation and echo strength. The dual architecture can reduce channel-count overhead compared with using separate single-channel amplifiers, although the circuit must still preserve impedance matching, signal integrity, and per-channel calibration. Confirm supply, output swing, and bandwidth limits against the AD602 datasheet before setting the analog front end.
推薦
Medical Ultrasound Imaging Systems
The AD602ARZ addresses the wide dynamic range encountered in medical ultrasound echo signals, where weak reflections require low-noise amplification and stronger returns need controlled attenuation or gain reduction. Its two channels support compact acquisition architectures without sacrificing independent gain adjustment, while the 16-lead SOIC package simplifies integration into multichannel boards. Proper design requires checking noise density, input impedance, allowable bandwidth, and output compliance for the selected probe and beamformer. The family is specifically optimized for ultrasound imaging, making its gain-control range and low-distortion architecture more relevant than the generic input range of a fixed-gain amplifier.
推薦
Dual-Channel Instrumentation
The AD602ARZ can serve as a dual variable gain element in instrumentation that monitors two related analog signals, such as sensor outputs, differential measurements, or diagnostic channels. Independent gain control allows each channel to be normalized into a common operating range before digitization, while the low-noise architecture helps retain weak sensor information. For precision systems, evaluate input-referred noise, offset behavior, gain accuracy, and usable bandwidth against the signal source. The two-channel package also reduces the number of separate amplifier positions, but channel matching and calibration should be verified in the finished circuit rather than assumed from identical device specifications.
推薦
Wideband Signal Conditioning
The AD602ARZ is appropriate for wideband signal-conditioning stages that require programmable gain rather than a fixed amplification factor. Its gain range of 11.25 dB to 31 dB can normalize changing input amplitudes before a downstream converter, comparator, or analysis block. The low-noise and wideband characteristics help preserve signal integrity, but the usable result depends on layout, impedance matching, and control stability. Keep the gain-control path isolated from sensitive input routing, observe all specified output-swing limits, and verify that the selected operating bandwidth leaves adequate margin for filtering and downstream acquisition requirements.
推薦
Test and Measurement Equipment
The AD602ARZ can support programmable gain blocks in test and measurement equipment where different input ranges must be handled without changing hardware gain settings. Its two independent channels are useful for measuring a reference and DUT side by side, applying different gains for level normalization, or building a differential acquisition front end. For laboratory accuracy, evaluate noise, distortion, bandwidth, and output settling against the instrument specification. The gain-control input should be driven by a clean, stable source, and the PCB should minimize parasitic coupling between the high-impedance control node and sensitive amplifier inputs.
推薦
Low-Noise Analog Signal Chains
The AD602ARZ fits low-noise analog chains that need controllable amplification of small or variable-level signals. By adjusting gain in the analog domain, the system can keep later stages within their usable range while avoiding excessive amplification of noise in a fixed-gain architecture. The AD602 family's low-noise, low-distortion design is especially relevant when dynamic range is limited by the front end. Designers should characterize the complete chain, including source impedance, cable or PCB losses, filter components, and ADC input range. The amplifier's gain-control behavior must also remain stable over the required operating and temperature range.
推薦
推薦產品摘要
工程參考資料,適用於 AD602ARZ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | AD602AR | AD602ARZ-R7 | AD602ARZ-RL | AD602JRZ |
|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 16-lead SOIC | 16-lead SOIC | 16-lead SOIC | 16-lead SOIC | 16-lead SOIC |
| Product Type | Dual variable gain amplifier | Dual variable gain amplifier | Dual variable gain amplifier | Dual variable gain amplifier | Dual variable gain amplifier |
| Number of Channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Gain Range | 11.25 dB to 31 dB | 11.25 dB to 31 dB | 11.25 dB to 31 dB | 11.25 dB to 31 dB | 11.25 dB to 31 dB |
| Gain Control | Programmable per channel | Programmable per channel | Programmable per channel | Programmable per channel | Programmable per channel |
| Signal Class | Low-noise, wideband, low-distortion | Low-noise, wideband, low-distortion | Low-noise, wideband, low-distortion | Low-noise, wideband, low-distortion | Low-noise, wideband, low-distortion |
| Primary Application | Ultrasound imaging and precise gain control | Ultrasound imaging and precise gain control | Ultrasound imaging and precise gain control | Ultrasound imaging and precise gain control | Ultrasound imaging and precise gain control |
| Ordering-Code Characteristics | AD602ARZ | AD602AR; suffix-specific conditions differ | AD602ARZ with -R7 shipment format | AD602ARZ with -RL shipment format | AD602JRZ; J temperature grade differs |
主要差異化特點
- Independent dual-channel gain control (對比AD602AR)
- Exact target electrical identity with production shipment flexibility (對比AD602ARZ-R7)
- Same footprint and gain architecture (對比AD602ARZ-RL)
- Temperature-grade selection within the AD602 family (對比AD602JRZ)
設計說明
Route the two amplifier channels and their gain-control inputs symmetrically to reduce channel-to-channel timing and coupling differences. Keep the high-impedance gain-control paths away from input, output, and clock-like fast edges, and guard the sensitive nodes where layout rules permit. Place input and output decoupling capacitors close to the relevant device pins, and provide a direct, low-impedance return path beneath the SOIC footprint. The manufacturer AD602 datasheet should be used to assign every pin and identify any unused or test positions before fabrication.
Treat each channel as a wideband analog path rather than a low-frequency audio stage. Use short traces, controlled reference planes, and terminations appropriate to the source and load impedances; long branches or uncontrolled stubs can create reflections and reduce usable bandwidth. Check the complete signal chain against the AD602 bandwidth and output-swing limits under the intended gain setting. If the source impedance is high, account for bias-current and thermal-noise effects rather than relying on the amplifier's low-noise rating in isolation.
Do not assume that every AD602 ordering suffix is an independent functional upgrade. AD602ARZ-R7 and AD602ARZ-RL retain the target's electrical identity while changing shipment format, whereas AD602JRZ uses a different temperature-grade ordering suffix. Confirm the exact suffix meaning, temperature range, qualification status, and reel quantity in the manufacturer ordering guide. A package match alone is insufficient for production equivalence, particularly where system calibration, environmental qualification, or traceability requirements differ.
Plan the supply network for simultaneous operation of both channels because each channel can carry independent analog signals. Use the voltage and current limits stated in the AD602 datasheet, Rev. F, and include adequate bypass capacitance at the device pins. Estimated: if the final schematic specifies 5.0 V and 100 mA total, the ideal input-power draw is 0.50 W before regulator loss; actual consumption must be checked against the datasheet rather than this illustrative calculation.
合規資訊
The manufacturer product page does not provide extractable RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations for this ordering code. AEC-Q100 is not applicable because the AD602 is an analog signal-processing amplifier rather than an automotive-qualified device.