AD626BN - True Single-Supply Differential Amplifier | ADI
MPN: AD626BN ✓ 啟用中AD626BN 概覽
A differential amplifier is an amplifier that responds to the voltage difference between two inputs while rejecting voltage common to both inputs. Within the amplifier-IC hierarchy, the AD626BN is a difference amplifier rather than a general-purpose operational amplifier. It is particularly useful when a small sensor or measurement signal must be extracted in the presence of a larger common-mode voltage, reducing the risk that the common-mode component will saturate the signal chain.
The principal advantages are its low-cost single-supply operation, true differential input stage, and ability to operate from supplies as low as +2.4 V. The single +2.4 V to +10 V range supports low-voltage sensor systems, while the dual-supply option extends operation to ±1.2 V to ±6 V. The 100 kHz bandwidth is suitable for low-frequency differential measurements rather than high-speed signal processing.
In a typical circuit, the two input pins receive the sensor signal and its reference or return path. The amplifier produces an output proportional to the difference between those inputs while the internal architecture suppresses much of the common-mode voltage. Gain is established with external feedback resistors, allowing the circuit to be adapted to different input ranges. Supply decoupling and correct resistor placement remain important because input and output noise directly affect the fidelity of the amplified measurement.
Typical uses include current-sense and bridge-signal conditioning, instrumentation interfaces, industrial measurement systems, and low-frequency sensor acquisition. The 8-pin PDIP package is also useful for prototypes, educational circuits, and through-hole industrial control boards where a surface-mount footprint would be inconvenient. Dual-supply operation can simplify systems that already provide symmetrical rails and require bipolar input or output signaling.
For a new design, verify the input common-mode range at every supply voltage and confirm that output swing remains within the selected supply limits. Check the feedback-resistor values against the required gain, place the bypass capacitor close to the supply pins, and avoid driving capacitive loads unless the resulting stability behavior has been checked. Those precautions are more important than raw bandwidth when extracting a reliable low-level differential measurement.
This page combines the manufacturer's functional description with practical design guidance, package and supply details, a structured comparison, and a focused view of compatible replacement options. It is intended to help engineers answer specification, application, sourcing, and replacement questions without relying on basic distributor listings alone.
直接替換替代品,適用於 AD626BN — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: AD626BN (相同外形與佔位) — 差異在於 Input Common-Mode Range, Operating Temperature Range, Product Type, Single-Supply Operating Voltage.
AD626ANZ
✅ 直接替換聯絡詢價
查看資料表 →AD626BNZ
✅ 直接替換📋 參考替代品(不在目錄中)
AD626ARZ
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
AD626AR
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
AD626BN 最大額定值與電氣特性
| Product Type | True single-supply differential amplifier |
| Number of Amplifiers | 1 circuit |
| Single-Supply Operating Voltage | +2.4 V to +10 V |
| Dual-Supply Operating Voltage | ±1.2 V to ±6 V |
| Bandwidth | 100 kHz |
| Maximum Input Offset Voltage | 2.5 mV |
| Input Common-Mode Range | Equal to 6 × (VS − 1 V) |
| 封裝 | 8-pin PDIP |
| 腳位數 | 8 pins |
| 安裝類型 | Through-hole |
| Supplier Configuration | Tube |
| 工作溫度範圍 | -40 °C to +85 °C |
AD626BN 8-pin pdip 腳位配置指南
AD626BN(8-pin pdip 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: AD626BN.
請參閱 資料表 以查看完整腳位配置。
典型應用
AD626BN 適用於 6 應用s: Bridge Sensor Signal Conditioning, Current-Sense Amplification, Instrumentation Signal Interfaces, Industrial Process Monitoring, Battery-Powered Sensor Nodes, Low-Frequency Low-Pass Filtering.
Bridge Sensor Signal Conditioning
The AD626BN is well suited to low-frequency bridge measurements because its true differential input extracts the small voltage generated by a resistive bridge while attenuating a much larger common-mode voltage. With a 100 kHz bandwidth, it can condition pressure, load-cell, and strain-gauge signals that fall well below that frequency. The circuit is normally connected between the bridge excitation and a low-pass filter. Designers should verify that the bridge voltage and output swing remain within the amplifier's input common-mode range and output limits for the selected +2.4 V to +10 V or ±1.2 V to ±6 V supply.
Current-Sense Amplification
The AD626BN can amplify the small differential voltage developed across a current-sense resistor while rejecting the larger voltage shared by both resistor terminals. Its single-supply capability is useful in compact battery-powered or industrial systems, while the 2.5 mV maximum input offset may be significant when the shunt voltage is very small. Gain is established with external feedback components. Confirm that the common-mode input voltage remains valid as the shunt current changes, and assess offset and noise against the smallest current level that must be measured.
Instrumentation Signal Interfaces
AD626BN provides a cost-conscious differential input stage for low-level instrumentation signals where the source includes substantial common-mode voltage. It can form the analog front end of a measurement system before a separate low-pass filter and converter. The 100 kHz bandwidth supports slow sensor signals rather than high-speed data acquisition, so applications requiring wider bandwidth should choose a different amplifier. Feedback resistors set the differential gain, and their tolerance contributes directly to gain error. Layout should keep the differential input path compact and symmetrical.
Industrial Process Monitoring
The AD626BN can condition low-level differential process signals generated by pressure, temperature, or flow transmitters when the transmitter output includes a common-mode voltage. Its dual-supply range of ±1.2 V to ±6 V permits operation in symmetrical industrial control systems, while the single-supply range supports lower-voltage panels. The amplifier is appropriate for slow-changing process variables because its bandwidth is 100 kHz. Design validation should include startup behavior, output settling, electrical noise, and the common-mode headroom present during fault or sensor-disconnection conditions.
Battery-Powered Sensor Nodes
A +2.4 V to +10 V supply range makes the AD626BN usable in compact low-voltage sensor nodes that cannot support dual rails. It can amplify a differential sensor output before an ADC or comparator, reducing the need for separate subtraction circuitry. The trade-off is that single-supply operation constrains output headroom and common-mode range, especially near the lower supply limit. Use the lowest practical gain that preserves signal integrity, and verify startup, quiescent-current, and battery-voltage behavior across the complete operating range.
Low-Frequency Low-Pass Filtering
AD626BN is designed to amplify and low-pass filter small differential voltages, making it useful as the gain stage preceding an active filter in a sensor signal chain. Its 100 kHz bandwidth accommodates signals well below that limit, while external feedback components determine the closed-loop response and gain. Place the amplifier close to the filtering network to minimize high-frequency pickup and ground-current coupling. Decouple the supply pin locally, maintain symmetric differential routing where practical, and validate filter stability and settling using the actual source impedance and load capacitance.
工程參考資料,適用於 AD626BN — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | AD626ANZ | AD626BNZ | AD626ARZ | AD626AR |
|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP |
| Product Type | True single-supply differential amplifier | Differential amplifier | Differential amplifier | Differential amplifier | Differential amplifier |
| Number of Amplifiers | 1 circuit | 1 circuit | 1 amplifier | 1 circuit | 1 circuit |
主要差異化特點
- Supports true single-supply operation down to +2.4 V (對比AD626BNZ)
- Matches the documented 8-pin PDIP AD626 family footprint (對比AD626ANZ)
- Combines differential signal extraction with a 100 kHz bandwidth (對比AD626BNZ)
設計說明
Choose the supply configuration around both the source signal and the required output swing. Single-supply operation from +2.4 V to +10 V reduces system complexity, but it restricts output and input headroom near the lower rail. Dual supplies from ±1.2 V to ±6 V simplify bipolar signal chains. Confirm the actual common-mode voltage against 6 × (VS − 1 V), and ensure the output remains inside the amplifier's permitted swing under both normal load and worst-case input conditions.
Route the two differential inputs as closely together as practical, keeping the feedback resistors close to the amplifier pins. Place the supply bypass capacitor next to the corresponding power pin and provide a direct ground return to prevent output-current transients from modulating the input reference. For bridge or shunt measurements, avoid long parallel copper paths where injected current could create differential error. The 100 kHz bandwidth does not remove the need for disciplined high-frequency layout.
Do not assume that any AD626 suffix is automatically interchangeable. Confirm the 8-pin PDIP pinout, temperature grade, offset limit, bandwidth, supply range, and packing code in the manufacturer ordering table before replacing AD626BN. The 2.5 mV maximum input offset can dominate a measurement with a small differential signal, so calculate its effect at the minimum input level and include resistor tolerance and sensor sensitivity in the error budget.
合規資訊
The AD626 manufacturer product page and family documentation describe the electrical function and operating ranges but do not state the requested compliance attributes.