AD626BN - True Single-Supply Differential Amplifier | ADI
MPN: AD626BN ✓ פעילAD626BN סקירה
A differential amplifier is an amplifier that responds to the voltage difference between two inputs while rejecting voltage common to both inputs. Within the amplifier-IC hierarchy, the AD626BN is a difference amplifier rather than a general-purpose operational amplifier. It is particularly useful when a small sensor or measurement signal must be extracted in the presence of a larger common-mode voltage, reducing the risk that the common-mode component will saturate the signal chain.
The principal advantages are its low-cost single-supply operation, true differential input stage, and ability to operate from supplies as low as +2.4 V. The single +2.4 V to +10 V range supports low-voltage sensor systems, while the dual-supply option extends operation to ±1.2 V to ±6 V. The 100 kHz bandwidth is suitable for low-frequency differential measurements rather than high-speed signal processing.
In a typical circuit, the two input pins receive the sensor signal and its reference or return path. The amplifier produces an output proportional to the difference between those inputs while the internal architecture suppresses much of the common-mode voltage. Gain is established with external feedback resistors, allowing the circuit to be adapted to different input ranges. Supply decoupling and correct resistor placement remain important because input and output noise directly affect the fidelity of the amplified measurement.
Typical uses include current-sense and bridge-signal conditioning, instrumentation interfaces, industrial measurement systems, and low-frequency sensor acquisition. The 8-pin PDIP package is also useful for prototypes, educational circuits, and through-hole industrial control boards where a surface-mount footprint would be inconvenient. Dual-supply operation can simplify systems that already provide symmetrical rails and require bipolar input or output signaling.
For a new design, verify the input common-mode range at every supply voltage and confirm that output swing remains within the selected supply limits. Check the feedback-resistor values against the required gain, place the bypass capacitor close to the supply pins, and avoid driving capacitive loads unless the resulting stability behavior has been checked. Those precautions are more important than raw bandwidth when extracting a reliable low-level differential measurement.
This page combines the manufacturer's functional description with practical design guidance, package and supply details, a structured comparison, and a focused view of compatible replacement options. It is intended to help engineers answer specification, application, sourcing, and replacement questions without relying on basic distributor listings alone.
חלופות תחליף ישיר עבור AD626BN — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם AD626BN (אותו גורם צורה וטביעת רגל) — שונים ב Input Common-Mode Range, Operating Temperature Range, Product Type, Single-Supply Operating Voltage.
AD626ANZ
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←AD626BNZ
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
AD626ARZ
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
AD626AR
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
AD626BN דירוגים מרביים ומאפיינים חשמליים
| Product Type | True single-supply differential amplifier |
| Number of Amplifiers | 1 circuit |
| Single-Supply Operating Voltage | +2.4 V to +10 V |
| Dual-Supply Operating Voltage | ±1.2 V to ±6 V |
| Bandwidth | 100 kHz |
| Maximum Input Offset Voltage | 2.5 mV |
| Input Common-Mode Range | Equal to 6 × (VS − 1 V) |
| מארז | 8-pin PDIP |
| מספר פינים | 8 pins |
| סוג הרכבה | Through-hole |
| Supplier Configuration | Tube |
| טווח טמפרטורת פעולה | -40 °C to +85 °C |
מדריך תצורת פינים של AD626BN 8-pin pdip
תצורת פינים עבור AD626BN (מארזת 8-pin pdip). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.
אין נתוני פריסת פינים מפורטים עבור AD626BN.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
AD626BN מתאים עבור 6 יישוםs: Bridge Sensor Signal Conditioning, Current-Sense Amplification, Instrumentation Signal Interfaces, Industrial Process Monitoring, Battery-Powered Sensor Nodes, Low-Frequency Low-Pass Filtering.
Bridge Sensor Signal Conditioning
The AD626BN is well suited to low-frequency bridge measurements because its true differential input extracts the small voltage generated by a resistive bridge while attenuating a much larger common-mode voltage. With a 100 kHz bandwidth, it can condition pressure, load-cell, and strain-gauge signals that fall well below that frequency. The circuit is normally connected between the bridge excitation and a low-pass filter. Designers should verify that the bridge voltage and output swing remain within the amplifier's input common-mode range and output limits for the selected +2.4 V to +10 V or ±1.2 V to ±6 V supply.
Current-Sense Amplification
The AD626BN can amplify the small differential voltage developed across a current-sense resistor while rejecting the larger voltage shared by both resistor terminals. Its single-supply capability is useful in compact battery-powered or industrial systems, while the 2.5 mV maximum input offset may be significant when the shunt voltage is very small. Gain is established with external feedback components. Confirm that the common-mode input voltage remains valid as the shunt current changes, and assess offset and noise against the smallest current level that must be measured.
Instrumentation Signal Interfaces
AD626BN provides a cost-conscious differential input stage for low-level instrumentation signals where the source includes substantial common-mode voltage. It can form the analog front end of a measurement system before a separate low-pass filter and converter. The 100 kHz bandwidth supports slow sensor signals rather than high-speed data acquisition, so applications requiring wider bandwidth should choose a different amplifier. Feedback resistors set the differential gain, and their tolerance contributes directly to gain error. Layout should keep the differential input path compact and symmetrical.
Industrial Process Monitoring
The AD626BN can condition low-level differential process signals generated by pressure, temperature, or flow transmitters when the transmitter output includes a common-mode voltage. Its dual-supply range of ±1.2 V to ±6 V permits operation in symmetrical industrial control systems, while the single-supply range supports lower-voltage panels. The amplifier is appropriate for slow-changing process variables because its bandwidth is 100 kHz. Design validation should include startup behavior, output settling, electrical noise, and the common-mode headroom present during fault or sensor-disconnection conditions.
Battery-Powered Sensor Nodes
A +2.4 V to +10 V supply range makes the AD626BN usable in compact low-voltage sensor nodes that cannot support dual rails. It can amplify a differential sensor output before an ADC or comparator, reducing the need for separate subtraction circuitry. The trade-off is that single-supply operation constrains output headroom and common-mode range, especially near the lower supply limit. Use the lowest practical gain that preserves signal integrity, and verify startup, quiescent-current, and battery-voltage behavior across the complete operating range.
Low-Frequency Low-Pass Filtering
AD626BN is designed to amplify and low-pass filter small differential voltages, making it useful as the gain stage preceding an active filter in a sensor signal chain. Its 100 kHz bandwidth accommodates signals well below that limit, while external feedback components determine the closed-loop response and gain. Place the amplifier close to the filtering network to minimize high-frequency pickup and ground-current coupling. Decouple the supply pin locally, maintain symmetric differential routing where practical, and validate filter stability and settling using the actual source impedance and load capacitance.
נתוני עזר הנדסיים עבור AD626BN — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | AD626ANZ | AD626BNZ | AD626ARZ | AD626AR |
|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP |
| Product Type | True single-supply differential amplifier | Differential amplifier | Differential amplifier | Differential amplifier | Differential amplifier |
| Number of Amplifiers | 1 circuit | 1 circuit | 1 amplifier | 1 circuit | 1 circuit |
מבדילים עיקריים
- Supports true single-supply operation down to +2.4 V (לעומתAD626BNZ)
- Matches the documented 8-pin PDIP AD626 family footprint (לעומתAD626ANZ)
- Combines differential signal extraction with a 100 kHz bandwidth (לעומתAD626BNZ)
הערות תכנון
Choose the supply configuration around both the source signal and the required output swing. Single-supply operation from +2.4 V to +10 V reduces system complexity, but it restricts output and input headroom near the lower rail. Dual supplies from ±1.2 V to ±6 V simplify bipolar signal chains. Confirm the actual common-mode voltage against 6 × (VS − 1 V), and ensure the output remains inside the amplifier's permitted swing under both normal load and worst-case input conditions.
Route the two differential inputs as closely together as practical, keeping the feedback resistors close to the amplifier pins. Place the supply bypass capacitor next to the corresponding power pin and provide a direct ground return to prevent output-current transients from modulating the input reference. For bridge or shunt measurements, avoid long parallel copper paths where injected current could create differential error. The 100 kHz bandwidth does not remove the need for disciplined high-frequency layout.
Do not assume that any AD626 suffix is automatically interchangeable. Confirm the 8-pin PDIP pinout, temperature grade, offset limit, bandwidth, supply range, and packing code in the manufacturer ordering table before replacing AD626BN. The 2.5 mV maximum input offset can dominate a measurement with a small differential signal, so calculate its effect at the minimum input level and include resistor tolerance and sensor sensitivity in the error budget.
מידע על תאימות
The AD626 manufacturer product page and family documentation describe the electrical function and operating ranges but do not state the requested compliance attributes.