Analog Devices

AD7451ARM - 12-Bit 1 MSPS SAR ADC | Analog Devices

MPN: AD7451ARM ✓ 啟用中
Single supply, 3 V or 5 V Vdss 8-lead MSOP Package
MOQ: 1 |

AD7451ARM 概覽

The Analog Devices AD7451ARM is a 12-bit, 1 MSPS successive-approximation analog-to-digital converter with a pseudo-differential input and a serial interface, housed in an 8-lead MSOP package. The converter performs one complete conversion in 16 us and operates from a single 3 V or 5 V supply. Its pseudo-differential input structure supports signal-chain designs where a second input is used for offset correction, level shifting, or common-mode management rather than true simultaneous differential sampling. An externally applied reference voltage may range from 100 mV to VDD, giving designers control over the full-scale input range.

An analog-to-digital converter converts a continuous analog voltage into a digital code. A SAR ADC performs this task by successively comparing the sampled input with an internal or external reference and generating one output bit per comparison cycle. The AD7451 belongs to the ADC and DAC category within the broader analog and mixed-signal IC family, combining a sampling network, comparator, reference interface, and digital output stage in one compact device.

Key characteristics include 12-bit resolution, a 1 MSPS sampling rate, and a pseudo-differential analog input. The serial conversion process is controlled by the active-low CS input and an external serial clock, allowing the converter to communicate directly with microcontrollers, DSPs, or other serial acquisition systems. The external reference interface accommodates reference voltages from 100 mV up to the device supply voltage, so full-scale scaling can be matched to the sensor, transducer, or conditioned signal being measured.

The AD7451 uses the charge-redistribution architecture typical of SAR converters. Each conversion acquires the input on an internal capacitor array and then resolves 12 binary-weighted decisions. This architecture offers predictable sampling behavior, straightforward digital interfacing, and good suitability for moderate-speed instrumentation. Because conversion time is 16 us, a sustained 1 MSPS operating rate requires careful clock and data-capture timing as well as attention to the serial interface cycle budget.

Typical uses include industrial process monitoring, portable measurement systems, sensor-interface boards, battery-powered instruments, and embedded data-acquisition modules. The part is also appropriate when a microcontroller needs a dedicated high-resolution ADC for temperature, pressure, current, or analog-front-end measurements. Its small 8-lead MSOP package supports compact layouts, although the narrow lead pitch requires careful solder-paste control and inspection.

Designers should treat the reference voltage as a precision analog node. Keep the REFIO or external reference connection short, place bypass capacitance at the supply pins, and route serial clock and data traces away from the analog input. Confirm signal polarity, common-mode range, acquisition timing, and code format against the manufacturer datasheet before integrating the converter into a new board.

This page combines the manufacturer specifications, package information, ordering details, and cross-reference findings with practical guidance for interface timing, reference design, layout, and replacement decisions.

直接替換替代品,適用於 AD7451ARM — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

AD7451ARMZ

✅ 直接替換
📦 8-lead MSOP
Same 12-bit, 1 MSPS SAR converter and 8-lead MSOP outline; ordering termination differs, so confirm temperature and packing codes

📋 參考替代品(不在目錄中)

ADS7834E/250G4

✅ 直接替換
📦 8-lead MSOP
Both provide 12-bit, 1 MSPS serial SAR conversion; input, reference, and digital-interface implementation must be checked pin by pin

📋 參考替代品(不在目錄中)

AD7451ARM 最大額定值與電氣特性

解析度 12 bit
取樣率 1 MSPS
Conversion Time 16 us
Architecture Successive approximation (SAR)
Input Channel Count 1 channel
Input Type Pseudo-differential
Supply Configuration Single supply, 3 V or 5 V
External Reference Voltage Range 100 mV to VDD
Digital Interface Serial, controlled by active-low CS and serial clock
工作溫度範圍 -40C to +85C
封裝 8-lead MSOP
Lead Count 8 leads
安裝類型 Surface mount
Product Lifecycle Production

AD7451ARM 8-lead msop 腳位配置指南

AD7451ARM(8-lead msop 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

AD7451ARM 的 8-lead msop 封裝腳位圖

無詳細腳位定義資料: AD7451ARM.

請參閱 資料表 以查看完整腳位配置。

典型應用

AD7451ARM 適用於 6 應用s: Industrial Process Sensing, Portable Measurement Instruments, Embedded Data-Acquisition Module, Battery Current and Power Monitoring, Industrial Automation and Control Loops, Test and Measurement Front Ends.

🏭

Industrial Process Sensing

The AD7451ARM is suitable for monitoring pressure, temperature, level, and current signals in industrial process-control equipment. Its 12-bit resolution and 1 MSPS conversion capability provide useful resolution for slow process variables while leaving sampling headroom for multiplexed channels or transient detection. The pseudo-differential input is useful when the conditioning stage can provide a return or correction signal. Place the converter behind a low-noise amplifier, use the external reference range to match the transducer output, and check the acquisition timing against the required sensor update interval.

🔋

Portable Measurement Instruments

Battery-powered meters and field-measurement devices can use the AD7451ARM to acquire slow analog inputs without adding a large converter footprint. The 8-lead MSOP package supports compact instrument boards, and the single 3 V or 5 V operation aligns with many embedded analog systems. The 12-bit code width is appropriate for many battery, current, and resistive sensor measurements. Reference current, converter power consumption, and sleep-mode behavior should be included in the overall battery budget before finalizing the analog architecture.

🖥️

Embedded Data-Acquisition Module

The AD7451ARM fits modular data-acquisition cards that expose analog measurements to a microcontroller, DSP, or FPGA. A 1 MSPS sampling rate supports faster sampling than conventional slow-resolution converters, while the 16 us conversion time allows sequential acquisition when multiple sources are multiplexed. The serial interface keeps the pin count low and reduces parallel-bus routing. Validate setup time, chip-select behavior, clock polarity, and data-capture latency in the system timing diagram.

⚡

Battery Current and Power Monitoring

The AD7451ARM can digitize outputs from current-sense amplifiers in energy-monitoring and battery-analysis systems. Its 12-bit resolution supports incremental measurement of charge and discharge current, and the 1 MSPS rate can capture current transients that occur during load switching. The pseudo-differential input arrangement can accept the sense-amplifier output and a reference-side signal for correction. Keep the sense path away from the digital clock and use the external reference range to optimize the available converter span.

🤖

Industrial Automation and Control Loops

The AD7451ARM is appropriate for feedback monitoring in industrial automation systems where analog process values must be converted for a controller. The 1 MSPS sampling capability is well matched to many temperature, pressure, and actuator-position loops, while the 12-bit resolution limits quantization error relative to an 8-bit converter. Use the pseudo-differential arrangement to reject common-mode offsets in the conditioning stage, and specify reference accuracy carefully because reference error appears directly in the converted result.

📟

Test and Measurement Front Ends

The AD7451ARM can serve as the conversion stage in a compact laboratory or field-test instrument that measures low-level analog quantities. The 12-bit resolution provides a practical balance between resolution, conversion speed, and circuit complexity, while the serial output simplifies connection to a digital instrument controller. Place a low-noise input buffer directly ahead of the converter, minimize trace length around the reference node, and apply shielding or grounding techniques appropriate to the expected signal level and source impedance.

What is the AD7451ARM?
The AD7451ARM is a 12-bit, 1 MSPS successive-approximation ADC from Analog Devices with a pseudo-differential input, serial output, and an 8-lead MSOP package. According to the Analog Devices AD7451 product page and data sheet, it performs a conversion in 16 us and operates from a single 3 V or 5 V supply.
What is the resolution and sampling rate of AD7451ARM?
The AD7451ARM provides 12-bit resolution and a maximum sampling rate of 1 MSPS. This combination suits embedded measurement systems that need more resolution than an 8-bit converter while retaining a compact, low-power SAR implementation. The 16 us conversion time allows the device to sustain the rated throughput when the serial clock and acquisition timing are designed correctly.
Where can I download the AD7451ARM datasheet?
The official AD7451 datasheet is available through the Analog Devices AD7451 product page at https://www.analog.com/en/products/ad7451.html. That page links the manufacturer data sheet, product selection table, evaluation resources, and technical documentation. Use the manufacturer document for the authoritative pin description, timing diagrams, electrical characteristics, and recommended application circuit.
Where can I find the AD7451ARM pinout?
The AD7451ARM pinout is published in the Pin Configuration and Pin Descriptions sections of the manufacturer data sheet linked from the AD7451 product page. Because the AD7451ARM uses an 8-lead MSOP, assign PCB tracks from that document rather than from a generic MSOP drawing. Verify analog input polarity, CS polarity, clock input, serial data direction, supply, ground, and reference connections against the exact revision you are using.
Does AD7451ARM support single-supply operation?
Yes, the AD7451ARM operates from a single 3 V or 5 V supply. The Analog Devices product page describes the AD7451 family as a single-supply SAR converter, while the external reference can range from 100 mV to VDD. Decoupling and the permitted supply range should be taken directly from the electrical characteristics table for the selected temperature grade.
What is the difference between pseudo-differential and true differential input?
A pseudo-differential ADC uses one main analog input and a second input for offset, level, or common-mode correction rather than sampling two signals simultaneously. The AD7451ARM uses this pseudo-differential arrangement, as stated in the Analog Devices product documentation. A true differential converter such as the AD7450 continuously samples both input terminals, so the two parts are not interchangeable in every signal-chain application.
What are the key specifications of AD7451ARM that engineers should know?
The AD7451ARM combines 12-bit resolution, 1 MSPS throughput, a 16 us conversion time, and a pseudo-differential input in an 8-lead MSOP. It uses a single 3 V or 5 V supply and accepts an external reference from 100 mV to VDD. Serial conversion is controlled by active-low CS and an external clock, which allows direct interfacing with microcontrollers and DSPs.
How do I connect an external reference to AD7451ARM?
The external reference voltage is applied to the reference input and may range from 100 mV to VDD according to the Analog Devices AD7451 product page. Keep this trace short and treat it as a precision analog net. Follow the reference-source impedance and bypass recommendations in the manufacturer application circuit, and use the external reference range to set the converter full-scale range.
Is AD7451ARM suitable for sensor and industrial measurement systems?
Yes, the AD7451ARM fits sensor and industrial measurement systems that require 12-bit resolution at a moderate sampling rate. Its 1 MSPS throughput can capture fast transients or multiplexed analog channels, while the pseudo-differential input provides a practical return path for offset correction. A front-end amplifier must still keep the sensor signal inside the converter's permitted input range.
What can replace AD7451ARM?
The closest documented replacement candidate is AD7451ARMZ, which retains the 12-bit, 1 MSPS SAR function in the same 8-lead MSOP outline and differs in the ordering termination code. A cross-brand candidate is the Texas Instruments ADS7834E/250G4, also identified as an 8-pin, 12-bit, 1 MSPS serial ADC. Confirm pin naming, reference arrangement, serial interface timing, and acquisition behavior against both datasheets before substituting either device.
Is AD7451ARM the same as AD7451ARMZ?
AD7451ARMZ is an ordering variant of the AD7451 in the same 8-lead MSOP family, while AD7451ARM is the ordering code specified on this page. The functional core remains a 12-bit, 1 MSPS pseudo-differential SAR converter. When comparing ordering codes, check the package, temperature range, tape-and-reel or tube configuration, and any lead-free or termination designation shown in the manufacturer product-selection table.
AD7451ARM vs ADS7834E/250G4 - which is better for a microcontroller data-acquisition board?
Choose the AD7451ARM when its pseudo-differential input and manufacturer-documented reference interface are central to the design. The ADS7834E/250G4 is a documented cross-brand option with the same 12-bit, 1 MSPS, 8-pin serial-ADC class. The final selection depends on exact pin mapping, reference voltage capability, acquisition timing, digital output format, availability, and the device-specific application circuits.
When should I choose AD7451ARM instead of AD7450?
Choose the AD7451ARM when the signal source requires a pseudo-differential input arrangement or when the AD7451 reference and serial interface match the surrounding circuitry. Choose the AD7450 when a true differential input is necessary, because the Analog Devices AD7450 product page describes a fully differential analog input. Their input architectures are not interchangeable, and package verification is required before considering a board change.
Is AD7451ARM in stock and what is its lead time?
Current inventory and lead time should be confirmed through the Request a Quote form on this page. The manufacturer lists the AD7451 family as a production product, and the AD7451ARM ordering code is shown as a standard Analog Devices part. Provide your required quantity, date code, and shipping destination with the request so the order can be scheduled against current supply.
Where can I buy AD7451ARM online and how much does it cost?
Use the Request a Quote form on this page to request AD7451ARM pricing, stock confirmation, and an estimated lead time. Quote requests support the exact ordering code, package variant, and quantity needed for production planning. The same form is appropriate for scheduled deliveries, prototype quantities, and supply-chain review of the AD7451ARM.

工程參考資料,適用於 AD7451ARM — 比較、設計指引及合規資訊。

選型指南

Choose the AD7451ARM when the design requires a 12-bit, 1 MSPS SAR converter with a pseudo-differential input, an external reference, and an 8-lead MSOP footprint. AD7451ARMZ is the closest same-brand ordering option when its termination, temperature, and packing codes match the assembly plan. Consider the ADS7834E/250G4 when the goal is to evaluate a second source: its 12-bit, 1 MSPS, 8-pin class matches well, but pin mapping, input architecture, reference implementation, and serial timing must be reconciled before substitution. The AD7450 is useful as a functional comparison when a true fully differential input is required, but it is not the default replacement for a pseudo-differential design. For all options, verify supply limits, external-reference requirements, conversion latency, output coding, and acquisition timing against the device-specific data sheet.

與替代品比較

參數 本產品 AD7451ARMZ ADS7834E/250G4
Package 8-lead MSOP 8-lead MSOP 8-lead MSOP
Brand Analog Devices Analog Devices Texas Instruments
Resolution 12 bit 12 bit 12 bit
Sampling Rate 1 MSPS 1 MSPS 1 MSPS
ADC Architecture Successive approximation (SAR) Successive approximation (SAR) Successive approximation (SAR)
Input Channel Count 1 channel 1 channel 1 channel

主要差異化特點

  • Same-branded ordering option retains the complete converter function (對比AD7451ARMZ)
  • Documented cross-brand conversion capability (對比ADS7834E/250G4)
  • Pseudo-differential input architecture (對比ADS7834E/250G4)

設計說明

Route the analog input and reference connections away from the serial clock and data traces, and place input bypass capacitance at the converter supply pins. Because this package has a narrow lead pitch, define a stable solder-paste stencil and inspect the analog and digital leads separately during manufacturing. Use the manufacturer's application circuit as the basis for separating sensitive analog routing from the chip-select and clock paths.

The 1 MSPS maximum throughput and 16 us conversion time require a complete timing budget that includes acquisition, conversion, clocking, and output transfer. Confirm chip-select polarity, clock edge requirements, output settling, and microcontroller or DSP capture latency from the manufacturer timing diagrams. These checks are more important than adding large bulk capacitance because excessive lead length or an unsuitable clock arrangement can dominate converter accuracy.

Treat the reference node as part of the measurement chain. A reference error contributes directly to gain error, so use the reference range of 100 mV to VDD to maximize the converter's usable input span while respecting the reference-source requirements. Keep the reference trace compact, place its recommended bypass capacitor at the pin, and isolate the reference from high-current return paths in the PCB stack-up.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The AD7451 family is listed as a production product by Analog Devices. RoHS, REACH, halogen-free, and conflict-minerals declarations are not stated in the product information and remain unknown until confirmed on the manufacturer product page or in a current compliance document.

相關搜尋

AD7451ARM AD7451ARM datasheet AD7451ARM datasheet pdf AD7451ARM pinout AD7451ARM specifications ad7451a manual AD7451ARM equivalent AD7451ARM replacement AD7451ARM vs ADS7834 AD7451 12 bit ADC MSOP AD7451ARM application circuit AD7451ARM price AD7451ARM stock Analog Devices AD7451ARM

相關元件與詞彙

Analog Devices AD7451 AD7451ARM AD7451ARMZ Texas Instruments ADS7834E/250G4 analog-to-digital converter ADC successive approximation SAR ADC pseudo-differential input single supply external reference voltage serial interface 12-bit resolution 1 MSPS sampling rate 16 us conversion time 8-lead MSOP surface mount microcontroller interface DSP interface industrial process monitoring sensor measurement data acquisition Analog Devices AD7450
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情