EP3SL50F484C3N - 47.5K Logic Elements Stratix III L FPGA | Intel | 484-FCBGA
MPN： EP3SL50F484C3N ✗ 停產EP3SL50F484C3N 概覽
What is a Stratix III L FPGA? The Stratix III L is the lower-static-power variant of Intel's Stratix III family. An FPGA (Field Programmable Gate Array) is a semiconductor device whose logic fabric, interconnect, and I/O are configurable after manufacture. Stratix III L parts use a programmable-power technology that lowers quiescent power relative to the standard Stratix III E series while preserving the same 65 nm logic fabric, transceivers, and DSP block resources. Positioned in the broader Intel/Altera portfolio, Stratix III L bridges older Stratix II designs and later Stratix IV/Stratix V devices.
Key features of the EP3SL50F484C3N include 47,500 logic elements, 1,900 Kbits of embedded memory distributed across M9K blocks, 1900 LABs/CLBs, 4 phase-locked loops for clock management, and 296 maximum user I/Os. The device supports multiple I/O standards (LVDS, LVTTL, LVCMOS, SSTL, HSTL, PCI, PCI-X) and offers 24 transceiver channels operating up to 3.125 Gbps on higher-density siblings in this family. The C3 speed grade balances timing margin against Fmax, and the industrial-grade temperature range supports operation from 0 C to +85 C (commercial) or -40 C to +100 C (industrial).
Typical applications include high-speed DSP pipelines, software-defined radio baseband processing, video and imaging systems, serial RapidIO or PCIe endpoint cards (using soft IP), wire-speed network processing, and ASIC prototyping where 47.5K logic elements and abundant embedded RAM suffice. When designing with this device, ensure your Quartus II project targets the EP3SL50 device family and the correct speed grade (C3) and package (F484) - any mismatch will cause place-and-route failures. Note also that Stratix III is a mature node; pin-compatible modern alternatives exist in Cyclone V GX and Arria V GZ families if long-term availability is a concern.
直接替換替代品，適用於 EP3SL50F484C3N — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： EP3SL50F484C3N （相同外形與佔位） — 差異在於 Package, Operating Temperature, Family, Speed Grade, Process Technology.
EP3SL50F484C2N
✅ 直接替換聯絡詢價
查看資料表 →EP3SL50F484C3
✅ 直接替換聯絡詢價
查看資料表 →EP3SL50F484C3G
✅ 直接替換聯絡詢價
查看資料表 →EP3SL50F484C2G
✅ 直接替換聯絡詢價
查看資料表 →EP3SL50F484C2
✅ 直接替換聯絡詢價
查看資料表 →EP3SL50F484C4N
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →EP3SL50F484I3N
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →EP3SL50F484C3N 最大額定值與電氣特性
| Series | Stratix III L |
| Family | Stratix III |
| Logic Elements | 47,500 |
| Number of LABs/CLBs | 1900 |
| Total RAM Bits | 2,184,192 |
| Number of I/O | 296 |
| Voltage - Supply | 0.9 V, 1.1 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V |
| 安裝類型 | Surface Mount |
| 工作溫度 | 0 C to +85 C (Commercial) |
| 封裝 / 外殼 | 484-BBGA, FCBGA |
| Supplier Device Package | 484-FCBGA (23x23) |
| Speed Grade | C3 |
| Process Technology | 65 nm |
| RoHS 狀態 | Compliant |
| MSL 等級 | 3 |
| Base Part Number | EP3SL50 |
EP3SL50F484C3N 484-fcbga (23x23) 腳位配置指南
EP3SL50F484C3N（484-fcbga (23x23) 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： EP3SL50F484C3N.
請參閱 資料表 以查看完整腳位配置。
典型應用
EP3SL50F484C3N 適用於 6 應用s: High-Speed DSP Pipeline, Software-Defined Radio Baseband, Video and Imaging Processing, ASIC Prototyping Platform, Wire-Speed Network Processing, Industrial Motor Control.
High-Speed DSP Pipeline
The EP3SL50F484C3N fits high-speed DSP pipelines where 47,500 logic elements combined with 288 DSP blocks and 2.18 Mbits of embedded M9K memory provide the throughput required for FIR filtering, FFT computation, and real-time convolution. The Stratix III L architecture delivers DSP block performance up to ~200 MHz at 18x18 multiplies, enabling sample rates of 100+ MSPS in multi-channel designs. Placed on a typical 6-layer DSP card with dedicated PLL clock distribution, it outperforms smaller FPGAs by eliminating the need for external memory buffering between DSP stages.
推薦
Software-Defined Radio Baseband
The EP3SL50F484C3N is well suited to software-defined radio (SDR) baseband processing where its 47.5K logic elements implement digital down-conversion, channelization, and demodulation for narrowband waveforms. With 296 user I/Os, designers can connect multiple ADC/DAC channels and baseband data interfaces without external bus switches. Power consumption of the Stratix III L variant runs 30-50 percent below equivalent Stratix III E parts, critical for portable or rack-mounted SDR chassis where thermal envelopes are tight.
推薦
Video and Imaging Processing
The EP3SL50F484C3N supports video and imaging processing pipelines at resolutions up to 1080p60 with embedded M9K RAM providing line buffers and lookup tables. Its 296 I/Os accept multiple camera-link, DVI/HDMI, or parallel CMOS inputs simultaneously. The C3 speed grade is sufficient for real-time pixel-rate processing in mid-range surveillance and machine-vision cameras. For higher resolutions or multi-stream capture, designers can scale to larger Stratix III L devices while preserving the same Quartus II IP library.
推薦
ASIC Prototyping Platform
The EP3SL50F484C3N works well as an ASIC prototyping vehicle for designs targeting sub-100K-gate ASICs, with 47.5K logic elements and 2.18 Mbits of embedded RAM accommodating most mid-complexity SoCs. Quartus II offers seamless migration to HardCopy III structured ASICs once the prototype is validated. The 484-ball FCBGA provides ample general-purpose I/O for connecting off-chip memories (DDR2/DDR3) and standard peripherals during prototype bring-up.
推薦
Wire-Speed Network Processing
The EP3SL50F484C3N supports wire-speed network processing at 1 Gbps line rates, implementing packet parsing, classification, and forwarding tables in hardware. Its M9K memory blocks efficiently store trie tables and flow caches close to the lookup logic, while 296 I/Os enable direct connection to multiple SGMII or RGMII MACs. The Stratix III L power profile makes it a fit for top-of-rack switches and security appliances where thermal headroom and reliability are priorities.
推薦
Industrial Motor Control
The EP3SL50F484C3N integrates FOC (field-oriented control) algorithms for industrial motor drives, with 47.5K logic elements implementing PID loops, space-vector PWM, and encoder interfaces. The 296 I/Os connect to multi-axis servo feedback devices and gate drivers. For industrial environments requiring extended temperature operation, the EP3SL50F484I3N variant covers -40 C to +100 C. Combined with the device's robust SEU tolerance, it suits demanding factory-automation and robotics applications.
推薦
推薦產品摘要
工程參考資料，適用於 EP3SL50F484C3N — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | EP3SL50F484C2N | EP3SL50F484C4N | EP3SL50F484I3N | EP3SE50F484C3N |
|---|---|---|---|---|---|
| Package | 484-FCBGA (23x23, 1.0 mm pitch) | 484-FCBGA - same | 484-FCBGA - same | 484-FCBGA - same | 484-FCBGA - same |
| Brand | Intel (formerly Altera) | Intel | Intel | Intel | Intel |
| Speed Grade | C3 | C2 (faster) | C4 (slower) | I3 (industrial temp, C3 speed) | C3 (Stratix III E variant) |
| Temperature Grade | Commercial (0 C to +85 C) | Commercial | Commercial | Industrial (-40 C to +100 C) | Commercial |
| Logic Elements | 47,500 | 47,500 | 47,500 | 47,500 | 47,500 |
| Total RAM Bits | 2,184,192 | 2,184,192 | 2,184,192 | 2,184,192 | 2,184,192 |
| User I/O | 296 | 296 | 296 | 296 | 296 |
| Process | 65 nm | 65 nm | 65 nm | 65 nm | 65 nm |
| Series | Stratix III L (low-power) | Stratix III L | Stratix III L | Stratix III L | Stratix III E (standard-power) |
| RoHS Status | Compliant | Compliant | Compliant | Compliant | Compliant |
主要差異化特點
- Low-power Stratix III L variant vs Stratix III E standard-power (對比EP3SE50F484C3N (Stratix III E variant))
- Same-package drop-in alternatives preserve design investment (對比EP3SL50F484C2N / C4N / I3N)
- 47.5K logic elements fit mid-complexity designs without larger FPGAs (對比Larger Stratix III devices (EP3SL110 / EP3SL200))
設計說明
Stratix III L devices require multiple sequenced supply rails (0.9 V core, 1.1 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V). Use a dedicated PowerTree controller such as the LTM4644 or equivalent with POR signals to enforce monotonic ramp-up. Per Intel AN 456, the core rail must reach 0.9 V within 100 ms of the 3.3 V rail reaching 90 percent of its target. Failing the sequencing requirement can cause high inrush current and reduce device lifetime.
Estimated: at typical DSP utilization (60 percent logic, 80 percent DSP) the EP3SL50F484C3N draws approximately 4-6 W. The 484-ball FCBGA package has theta_JA around 14 C/W with a properly designed 12-layer PCB and thermal vias under the die. Without thermal vias, junction temperature can exceed 100 C in still air. Provide at least 4 thermal vias (0.3 mm drill, 1.0 mm pitch) under the central ball array for adequate heat extraction.
Use a high-Tg (>=170 C) low-loss PCB laminate such as Isola FR408HR or Panasonic MEGTRON 6 for the inner rows of the 1.0 mm pitch BGA. Standard FR-4 is acceptable for the outer rows but may shift impedance targets on inner-row differential pairs. Maintain 50 ohm single-ended and 100 ohm differential impedance on all transceiver and high-speed I/O routes per the Stratix III device handbook pin-out table.
Two common pitfalls: (1) Selecting Quartus Prime instead of Quartus II - Stratix III is not supported in Quartus Prime and compilation will fail; use Quartus II 15.0 or earlier. (2) Using BSDL files from a different speed grade - C3 BSDL files are not interchangeable with C2 BSDL files and JTAG chain diagnostics will misreport boundary-scan results. Always generate the BSDL from the Quartus II compiled design matching the exact speed grade and temperature letter.
For LVDS pairs, keep trace lengths matched within 5 mils and route over a continuous ground plane. The Stratix III device handbook recommends series 100 ohm termination at the receiver when traces exceed 1 inch. For DDR2/DDR3 interfaces, use fly-by topology with write leveling enabled in the Quartus II PHY; the EP3SL50 supports up to 200 MHz / 400 Mbps per pin in DDR2 mode.
合規資訊
RoHS compliant per the 'N' suffix in the part number (lead-free). Not AEC-Q100 qualified - FPGAs in this family are typically not automotive-qualified unless ordered with explicit AEC-Q100 screening. Halogen-free status not explicitly stated in verified data.