INA110KU/1K - Fast-Settling FET-Input Amplifier | TI
MPN: INA110KU/1K ✓ 啟用中INA110KU/1K 概覽
An instrumentation amplifier is a precision analog signal-conditioning IC that combines a differential input stage, input amplifiers, and an output difference amplifier into one package. This integrated approach provides higher common-mode rejection and gain accuracy than a discrete op-amp network. The INA110 belongs to the broader hierarchy of operational amplifiers, instrumentation amplifiers, analog signal-conditioning ICs, and semiconductor devices used to convert low-level sensor outputs into measurable voltages.
The INA110 uses a current-feedback circuit topology with a laser-trimmed input stage. Its FET inputs support high input impedance and low bias current, while the internal gain-set resistors reduce the number of external precision components required. Internal gain selections of 1, 10, 100, 200, and 500 V/V cover common sensor ranges spanning millivolts to several volts. The 4-microsecond settling specification is particularly important when several sensors are scanned through a multiplexer and each channel must be measured quickly.
The device is intended for bridge, strain-gauge, pressure-transducer, current-shunt, biomedical, and general-purpose differential-signal measurement. Its input-stage architecture is suited to systems where signal common-mode voltage varies and accurate rejection of common-mode disturbance is required. Designers must also account for the finite gain-bandwidth product, input and output voltage limits, supply range, input bias current, and the settling behavior of the selected gain when operating at high acquisition rates.
The INA110KU/1K is appropriate for precision data acquisition, industrial measurement, portable instrumentation, sensor-interface modules, and laboratory signal conditioning. In multiplexed systems, its fast settling can reduce the dead time between sensor channels. In low-frequency measurement systems, the same integrated gain network can simplify calibration while preserving repeatable gain settings. The manufacturer identifies the INA110 as a high-speed gain block suitable for both dedicated analog front ends and multiplexed acquisition systems.
For PCB implementation, use the manufacturer pin-description table when assigning tracks and keep the input and output routing short to reduce parasitic pickup of high-impedance sensor signals. Place the power-supply bypass capacitor close to the supply pins, maintain a quiet return path, and avoid routing sensitive input nodes beside switching-converter traces or digital clock lines. Check the selected gain against the datasheet bandwidth and settling requirements rather than relying on small-signal bandwidth alone.
This product page consolidates the INA110 device function, gain options, settling behavior, package information, drop-in replacement assessment, comparison parameters, and practical layout guidance into a design-focused reference. The comparison also distinguishes exact family options from devices whose electrical functions are similar but whose pin compatibility requires separate verification.
直接替換替代品,適用於 INA110KU/1K — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: INA110KU/1K (相同外形與佔位) — 差異在於 Package, Product Type, RoHS Status, Architecture, Gain-Bandwidth Product.
INA110KU
✅ 直接替換聯絡詢價
查看資料表 →INA110KUG4
✅ 直接替換聯絡詢價
查看資料表 →INA114BU
✅ 直接替換聯絡詢價
查看資料表 →INA111BU
✅ 直接替換聯絡詢價
查看資料表 →INA117KU
✅ 直接替換聯絡詢價
查看資料表 →AD524ARZ-16
✅ 直接替換📋 參考替代品(不在目錄中)
INA110KU/1K 最大額定值與電氣特性
| Amplifier Type | Instrumentation amplifier |
| Number of Circuits | 1 circuit |
| Input Type | FET input |
| 拓撲 | Current-feedback circuit topology |
| Internal Gain Settings | 1, 10, 100, 200, and 500 V/V |
| Settling Time to 0.01% | 4 us |
| 封裝 | 16-SOIC |
| Terminal Count | 16 terminals |
| 安裝類型 | Surface mount |
| RoHS 狀態 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
INA110KU/1K 16-soic 腳位配置指南
INA110KU/1K(16-soic 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: INA110KU/1K.
請參閱 資料表 以查看完整腳位配置。
典型應用
INA110KU/1K 適用於 6 應用s: Multiplexed Sensor Data Acquisition, Strain-Gauge Bridge Measurement, Pressure Transducer Interface, Portable Biomedical Instrumentation, Industrial Current-Shunt Monitoring, Laboratory Signal Conditioning.
Multiplexed Sensor Data Acquisition
The INA110KU/1K fits multiplexed sensor acquisition because its 4-microsecond settling to 0.01% shortens the interval needed after each input is selected. The amplifier can process the resulting differential sensor voltage while internal gains of 1, 10, 100, 200, or 500 V/V adapt the signal range for an ADC. Designers should include mux settling, source impedance, amplifier settling, and the converter acquisition window when calculating the complete cycle time. Keeping sensor traces short and bypassing the supply at the device also reduces errors that could otherwise be mistaken for slow channel settling.
推薦
Strain-Gauge Bridge Measurement
The INA110KU/1K is appropriate for differential bridge measurements where excitation produces a small millivolt-level signal and the common-mode voltage is much larger. Its FET-input architecture supports high input impedance, while internal gain settings up to 500 V/V can amplify the bridge difference without a discrete precision gain network. Gain selection must account for the corresponding bandwidth and settling behavior. Place the amplifier close to the bridge, maintain symmetrical input routing, and use a quiet ground reference to limit offset and common-mode errors in the measured strain signal.
推薦
Pressure Transducer Interface
The INA110KU/1K can condition the differential output of a resistive pressure bridge while rejecting excitation-related common-mode voltage. The internal gain choices allow a designer to select 10, 100, 200, or 500 V/V according to the transducer's full-scale output and required ADC range. Its fast 4-microsecond settling to 0.01% is useful in systems that scan several pressure channels. For reliable measurements, verify input and output swing limits, avoid clipping, and reference the ADC range to the selected gain so the full bridge output remains within the linear region.
推薦
Portable Biomedical Instrumentation
The INA110KU/1K is suitable for portable biomedical instrumentation when a low-level differential physiological signal must be amplified before digitization. FET inputs reduce loading on high-impedance sensors, and the internal gain network supports several signal ranges without a large external resistor array. The device's 4-microsecond settling also supports responsive acquisition of repeated or multiplexed channels. The circuit must still satisfy applicable medical-product safety and electromagnetic-compatibility requirements, and the sensor excitation, isolation strategy, leakage current, and electrode protection must be validated as a complete system.
推薦
Industrial Current-Shunt Monitoring
The INA110KU/1K can amplify the differential voltage generated across a current-shunt resistor when the shunt output lies within the amplifier's input range. Internal gain options let a single design cover signals from millivolts to substantially larger values, and fast settling supports rapid current measurements. Designers should choose the gain to keep the shunt voltage within the amplifier's linear input range while avoiding output saturation. A Kelvin connection from the shunt, short copper paths, and separation from high-current switching nodes are important for preserving measurement accuracy.
推薦
Laboratory Signal Conditioning
The INA110KU/1K is useful in laboratory instruments that must amplify a differential source while rejecting common-mode voltage and presenting a scaled signal to a converter or measurement instrument. The internal 1, 10, 100, 200, and 500 V/V gains provide repeatable range selection, while the fast settling response reduces dead time in automated test systems. For broadband laboratory signals, verify the gain-bandwidth product and output-drive limits for the selected gain. Use a shielded enclosure and guarded input routing when low-level signals would otherwise be affected by leakage, capacitance, or ambient interference.
推薦
推薦產品摘要
工程參考資料,適用於 INA110KU/1K — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | INA110KU | INA110KUG4 | INA114BU | INA111BU | INA117KU | AD524ARZ-16 |
|---|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Analog Devices |
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Function | Instrumentation amplifier | Instrumentation amplifier | Instrumentation amplifier | Instrumentation amplifier | Instrumentation amplifier | Instrumentation amplifier | Instrumentation amplifier |
| Circuit Count | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
主要差異化特點
- Fast 0.01% settling supports high-speed acquisition (對比INA114BU)
- Five integrated gain settings simplify range selection (對比AD524ARZ-16)
- FET-input architecture supports high-impedance sensing (對比INA111BU)
- Exact-family options simplify procurement continuity (對比INA117KU)
設計說明
Route the two differential inputs as a closely matched pair and keep them short, because unequal capacitance can create settling differences when a multiplexer or switched sensor is connected. Connect the instrumentation amplifier close to the source to minimize parasitic capacitance and pickup. Keep the input nodes away from power-switching traces, relay contacts, display circuitry, and digital clock lines. Use the manufacturer pin-description table when identifying the gain-control and feedback connections.
Place the required bypass capacitor immediately beside the INA110KU/1K supply pins and connect it to a low-impedance ground plane. Follow the datasheet capacitor value and voltage-rating requirements exactly. Check supply current under the selected gain and output-load condition, and confirm that the source can start and remain within its operating range during input-channel switching. Adequate local bypassing helps prevent supply disturbance from appearing as input-referred measurement error.
Validate acquisition timing with amplifier settling included rather than relying only on nominal bandwidth. The INA110KU/1K settles to 0.01% in 4 microseconds, but multiplexer transitions, source impedance, filter capacitors, and ADC sampling add their own settling requirements. Use the complete timing budget to define the sample-and-hold interval, and verify the selected gain against the gain-bandwidth product before promising accurate high-rate measurements.
Do not assume that two 16-SOIC instrumentation amplifiers are interchangeable solely because their packages match. Compare pin functions, gain-control logic, common-mode range, output swing, supply requirements, and external compensation components before substituting INA114BU, INA111BU, INA117KU, or AD524ARZ-16. For the exact INA110KU and INA110KUG4 ordering variants, verify grade and reel-packing details rather than relying only on the abbreviated MPN.
合規資訊
The accessible manufacturer product page identifies the INA110 family but does not state the exact material-compliance status of INA110KU/1K in the provided summary. Confirm current compliance records for the exact orderable part.