onsemi

LM2902VDG - Quad 3-32V Op Amp | onsemi | Industrial Control

MPN: LM2902VDG ✓ 啟用中
3 V to 32 V Vdss 14-SOIC Package Frequency compensated Speed
MOQ: 1 |

LM2902VDG 概覽

onsemi LM2902VDG is a quad, single-supply operational amplifier designed for low-cost general-purpose signal conditioning. The device contains four independent, internally frequency-compensated amplifiers with true differential inputs in a 14-pin SOIC package. Its specified operating supply range is 3 V to 32 V, making it suitable for industrial, automotive-adjacent, instrumentation, transducer, and control circuits that operate from widely separated supply rails.

An operational amplifier is an analog signal-processing IC that amplifies the voltage difference between its differential inputs. The quad configuration places four independent amplifiers in one package, reducing board area in multi-channel sensor, filter, comparator, and feedback-control designs. The LM2902 series supports single-supply or split-supply operation, which allows the same device architecture to be used in circuits powered by one positive rail or by positive and negative rails.

Key characteristics include four amplifier circuits in one 14-SOIC package, true differential inputs, single-supply operation, and an extended-temperature positioning used for demanding industrial applications. Because the package contains four independent amplifiers, each channel can perform a separate function without requiring multiple single-amplifier packages. Stable operation without external compensation simplifies designs requiring unity-gain voltage followers, comparators, summing amplifiers, transimpedance stages, and active filters.

The LM2902 belongs to the low-cost, general-purpose operational-amplifier category, combining transistor-level input stages, differential amplification, frequency compensation, and output-drive capability in a compact analog IC. Its 3 V to 32 V supply capability is particularly useful in industrial systems where the amplifier must interface with sensor signals and actuator-control circuitry operating from elevated positive rails. The wide supply range should not be interpreted as permission to exceed the limits of the particular operating-temperature grade or to operate without checking absolute-maximum ratings.

Typical applications include current-loop and voltage-loop sensing, low-side transducer amplification, programmable-control interfaces, sensor conditioning, industrial data acquisition, audio and communications buffers, and four-channel active filtering. For bridge sensors, the differential input arrangement helps reject common-mode voltage while amplifying the smaller bridge differential signal. In comparator service, output saturation timing should be checked at the actual load and supply voltage because the LM2902 is a general-purpose amplifier rather than a dedicated high-speed comparator.

When laying out a design, keep sensitive input and feedback traces short, place input-biasing or compensation networks close to their associated pins, and avoid long paths adjacent to switching nodes. Single-supply applications must also account for input and output common-mode limits. If the source can approach ground or the positive rail, use a suitable biasing arrangement or a rail-to-rail input amplifier instead of assuming full-swing operation. The manufacturer datasheet remains the controlling reference for electrical limits, pin functions, and test conditions.

This page combines the LM2902VDG ordering information with same-package replacement guidance and application-focused engineering guidance. It is intended to help engineers identify the correct quad amplifier package, compare genuine drop-in options, and plan the PCB and signal-conditioning implementation before ordering.

直接替換替代品,適用於 LM2902VDG — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: LM2902VDG (相同外形與佔位) — 差異在於 Package, Amplifier Type, Maximum Supply Voltage, Input Offset Voltage, Number of Amplifier Channels.

Texas Instruments
Maximum Supply Voltage: 26 V
Number of Amplifier Channels: 4
比較對象 LM2902VDG →
onsemi
Maximum Supply Voltage: 32 V
Number of Amplifier Channels: 4 channels
比較對象 LM2902VDG →
Texas Instruments
Package: 14-SOIC, 3.90 mm width
Amplifier Type: General Purpose
Input Offset Voltage: 2 mV
比較對象 LM2902VDG →
Texas Instruments
Package: 14-pin SOIC
Amplifier Type: Quad general-purpose operational amplifier
Maximum Supply Voltage: 30 V
比較對象 LM2902VDG →
Texas Instruments
Package: 14-SO
Amplifier Type: General-purpose operational amplifier
Maximum Supply Voltage: 26 V
比較對象 LM2902VDG →
onsemi
Amplifier Type: General-purpose quad operational amplifier
Input Offset Voltage: 2 mV
比較對象 LM2902VDG →
Texas Instruments
Package: 8-pin SOIC
Amplifier Type: Standard general-purpose amplifier
Maximum Supply Voltage: 36 V
比較對象 LM2902VDG →

LM2902DG

✅ 直接替換
onsemi
📦 14-SOIC
Quad operational amplifier · 4 channels · General purpose · 1 MHz · 0.6 V/µs · 3 V · 32 V · True differential inputs

聯絡詢價

查看資料表 →

LM2902D

✅ 直接替換
Texas Instruments
📦 14-SOIC
Quad operational amplifier · 4 · 26 V · 1.2 MHz · 2 mV · Single supply or split supply · Push-pull

聯絡詢價

查看資料表 →

LM2902NSR

✅ 直接替換
Texas Instruments
📦 14-SOIC
General-purpose operational amplifier · 4 circuits · 26 V · 1.2 MHz · 2 mV maximum · 14-SO · 14 pins · Surface mount

聯絡詢價

查看資料表 →

LM2902DG4

✅ 直接替換
Texas Instruments
📦 14-SOIC
General Purpose · 4 · Quad · 26 V · ±13 V · ±1.5 V to ±13 V · 1.2 MHz · 0.5 V/µs

聯絡詢價

查看資料表 →

LM2902KPWR

✅ 直接替換
Texas Instruments
📦 14-SOIC
4 amplifiers · General-purpose operational amplifier · 26 V · 1.2 MHz · 2 kV · -40 °C to +125 °C · Single-supply operation · Internally frequency compensated

聯絡詢價

查看資料表 →

LM2902VDR2

✅ 直接替換
onsemi
📦 14-SOIC
General-purpose quad operational amplifier · 4 channels · Single supply · 3 V to 26 V · 1.2 MHz · 2 mV · 14-pin SOIC · 14 pins

聯絡詢價

查看資料表 →

LM2902VDG 最大額定值與電氣特性

Number of Amplifier Circuits 4 circuits
Number of Channels 4 channels
Supply Voltage Range 3 V to 32 V
Power Supply Type Single supply
Input Type True differential input
Amplifier Configuration Quad operational amplifier
封裝 14-SOIC
安裝類型 Surface mount
Internal Frequency Compensation Frequency compensated

LM2902VDG 腳位配置

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
腳位 1 OUT1 — Output of amplifier 1
腳位 2 IN1- — Inverting input of amplifier 1
腳位 3 IN1+ — Non-inverting input of amplifier 1
腳位 4 GND — Ground connection
腳位 5 IN2+ — Non-inverting input of amplifier 2
腳位 6 IN2- — Inverting input of amplifier 2
腳位 7 OUT2 — Output of amplifier 2
腳位 8 OUT3 — Output of amplifier 3
腳位 9 IN3- — Inverting input of amplifier 3
腳位 10 IN3+ — Non-inverting input of amplifier 3
腳位 11 V+ — Positive supply connection
腳位 12 IN4+ — Non-inverting input of amplifier 4
腳位 13 IN4- — Inverting input of amplifier 4
腳位 14 OUT4 — Output of amplifier 4

典型應用

LM2902VDG 適用於 6 應用s: Industrial Sensor Signal Conditioning, Current-to-Voltage Measurement, Low-Side Power Feedback, Active Filtering and Buffering, Audio and Communication Buffers, Data Acquisition and Control Loops.

🏭

Industrial Sensor Signal Conditioning

The LM2902VDG fits industrial sensor conditioning because its four true-differential-input amplifiers can process four channels while operating from a 3 V to 32 V supply. Use each channel around a Wheatstone bridge, resistive sensor, or low-level transducer to amplify the differential sensor voltage and reject common-mode disturbance. Place the amplifier near the sensor source, bias the input pair within the datasheet common-mode range, and route the differential pair as a matched pair. The quad package reduces component count, while its extended-temperature positioning supports industrial designs that must tolerate temperature variation. Confirm output-swing limits when the sensor can approach either supply rail.

⚡

Current-to-Voltage Measurement

The LM2902VDG can implement four independent current-to-voltage measurements in instrumentation and power-control systems. Each amplifier works with a sense resistor, with the amplifier voltage gain set by feedback components and the input common-mode voltage kept within the manufacturer limits. Its 3 V minimum operating supply supports compact 3.3 V and 5 V systems, while the 32 V maximum provides headroom for higher industrial rails. A quad package simplifies routing because all four channels share the same positive supply and ground. Check the exact input offset and bias-current specifications before setting a low-value sense resistor, because those errors can dominate the measurement.

🔋

Low-Side Power Feedback

The LM2902VDG is appropriate for amplifying the voltage across a low-side current shunt in motor, power-supply, and battery-management feedback loops. The true-differential input arrangement reduces sensitivity to ground offsets between the shunt and amplifier ground, provided the common-mode voltage remains within the operating range. Use a Kelvin connection to the shunt and keep feedback resistors close to the relevant amplifier channel. Because one package contains four independent amplifiers, it can monitor several rails or implement the error amplifier, current sensor, and auxiliary signal conditioning stages. The 3 V to 32 V supply range accommodates both low-voltage portable systems and nominal 24 V industrial controls.

🔧

Active Filtering and Buffering

The four internally compensated channels in the LM2902VDG support multiple active-filter and buffering functions within one package. It can be used for unity-gain voltage followers, smoothing stages, gain blocks, and multichannel low-pass filters where the required bandwidth remains within the amplifier's specified performance. The 3 V to 32 V operating range permits the same quad topology to serve 3.3 V, 5 V, 12 V, and 24 V rails. Place each feedback network close to its associated output, avoid sharing long high-impedance paths between channels, and use a solid ground reference. Validate stability, output swing, and channel interaction against the final signal amplitude and load.

🎧

Audio and Communication Buffers

The LM2902VDG can provide low-cost buffering and gain stages for microphone preamplifiers, line-level interfaces, communications, and audio accessory circuits. Its true-differential inputs suit balanced sources, while the single-supply capability simplifies systems using a positive rail and a midpoint reference. Bias bipolar signal sources around the midpoint so their peaks remain inside the input common-mode range. The quad configuration allows simultaneous use for input buffering, active gain, output isolation, and auxiliary filtering. Designers should check the exact bandwidth, slew rate, output drive, output-voltage swing, and noise-related parameters in the onsemi electrical-characteristics table before using it in high-fidelity or high-speed paths.

🖥️

Data Acquisition and Control Loops

The LM2902VDG is useful in compact data-acquisition and industrial-control modules requiring several analog channels. Four amplifiers can convert sensor outputs, drive control-loop error amplifiers, buffer a reference, and condition a monitor signal from one 14-SOIC package. Its operating supply range of 3 V to 32 V allows deployment near both 3.3 V digital electronics and 24 V industrial interfaces. Keep the analog section physically separated from switching regulators and relay drivers, provide local supply bypassing, and use short feedback paths. For multiplexed or high-impedance sources, add the necessary isolation resistance and account for amplifier bias current to prevent channel-to-channel crosstalk and settling errors.

What is the onsemi LM2902VDG?
The onsemi LM2902VDG is a quad operational amplifier containing four independent, frequency-compensated amplifiers with true differential inputs in a 14-SOIC package. According to the onsemi LM2902 datasheet, the LM324 and LM2902 families support single-supply operation from 3 V to 32 V. The device is intended for general-purpose industrial signal-conditioning, buffering, amplification, comparator, and feedback-control circuits.
What is the supply voltage range of LM2902VDG?
The LM2902VDG operates from a 3 V to 32 V supply according to the onsemi product and datasheet information. This wide positive-supply range supports low-voltage 3 V circuits as well as higher-voltage industrial control systems. Designers must still observe the complete absolute-maximum ratings, including supply-voltage limits and input and output voltage restrictions under nonstandard conditions.
Is LM2902VDG a single-supply or dual-supply op amp?
The LM2902VDG supports single-supply operation and can also be used with split positive and negative supplies. According to the onsemi LM2902 datasheet, the amplifier series was designed for single-supply or split-supply operation over a 3 V to 32 V supply range. Single-supply designs commonly bias the non-inverting input above ground so that the output can swing around a usable midpoint.
Where can I download the LM2902VDG datasheet PDF?
The LM2902VDG datasheet PDF is available from the onsemi LM2902 family documentation and through the linked technical-data pages for this part. The manufacturer document identifies the LM2902 as a single-supply quad operational amplifier and covers device variants, electrical characteristics, pin functions, and application information. Use the onsemi document as the authoritative source when checking limits for the exact ordering code.
Where is the pinout for the LM2902VDG 14-SOIC?
The LM2902VDG pinout is found in the onsemi datasheet, which shows four independent amplifiers in the 14-SOIC package. Use the manufacturer pin-description table when assigning PCB tracks because the numbered pins correspond to the inputs, outputs, positive supply, and ground of all four channels. The package uses pins 1 through 14 in the conventional counter-clockwise SOIC numbering sequence.
What are the key specifications of LM2902VDG that engineers should know?
The LM2902VDG provides four independent true-differential-input amplifiers, a 3 V to 32 V supply range, internal frequency compensation, and a 14-SOIC surface-mount package. According to the onsemi LM2902 datasheet, these features make it suitable for general-purpose amplification from low-voltage to relatively high positive-supply systems. Detailed bandwidth, offset, slew-rate, common-mode, and output-swing limits should be selected from the exact electrical-characteristics table.
Can LM2902VDG be used as a comparator?
Yes, the LM2902VDG can perform comparator functions when its non-inverting input is biased above the common-mode limits of a zero-crossing application. According to the onsemi LM2902 documentation, the amplifiers are internally frequency compensated, which supports stable operation in many closed-loop configurations. For applications requiring fast crossing and controlled output levels, a dedicated comparator may provide more predictable delay and saturation behavior.
What are common LM2902VDG applications?
Common LM2902VDG applications include sensor-signal conditioning, bridge-sensor amplification, industrial data acquisition, active filters, voltage followers, current-to-voltage conversion, and closed-loop control. The onsemi datasheet describes a true-differential-input quad amplifier operating from a 3 V to 32 V supply, allowing one package to implement four independent analog channels. The appropriate input biasing and decoupling depend on the sensor impedance and supply topology.
What is the best drop-in replacement for LM2902VDG?
The best drop-in replacement is the part with the identical 14-SOIC footprint, matching quad-amplifier pin arrangement, and compatible 3 V to 32 V electrical limits. The onsemi LM2902 family includes LM2902DG, while the TI LM2902D is a documented industry-standard alternative with a 14-SOIC package. Confirm exact DC, common-mode, slew-rate, and temperature requirements against the manufacturer datasheets before approving a substitution.
What can replace LM2902VDG?
LM2902DG from onsemi and LM2902D from Texas Instruments are the strongest documented same-package replacements for LM2902VDG because both are 14-SOIC quad operational amplifiers. The TI LM2902 family page states that its devices are intended as replacements for versions of the LM224, LM324, and LM2902. Pin compatibility should still be checked channel by channel, particularly when output saturation, input common-mode range, or temperature limits drive the design.
Is LM2902VDG the same as LM2902DG?
LM2902VDG and LM2902DG are closely related onsemi ordering codes for the same LM2902 family and use the same 14-SOIC device family, but the exact suffix can encode qualification, temperature, or packaging attributes that must be verified. The onsemi ordering information is the controlling document for suffix interpretation. A direct substitution should be approved only after the lot, temperature grade, and tape-and-reel or tube packaging requirements are matched.
LM2902VDG vs LM2902D: which is better for industrial control?
Choose based on the exact qualification and sourcing requirements rather than assuming one part is universally better. LM2902VDG is the onsemi ordering code for a 14-SOIC quad amplifier operating from 3 V to 32 V, while LM2902D is the TI 14-SOIC industry-standard version. For industrial control, compare temperature range, input offset, bandwidth, slew rate, output drive, noise, lifecycle status, and any automotive qualification required by the end equipment.
When should I choose LM2902VDG over LM2902NSR?
Choose LM2902VDG when the required onsemi ordering option, qualification, temperature grade, and packaging match the target assembly, while choosing LM2902NSR when that specific site-listed ordering code is the approved configuration. Both belong to the broad LM2902 family and use a 14-pin surface-mount format. Because suffix details can change orderable temperature grade or packing, compare the onsemi ordering table before treating them as interchangeable manufacturing options.
Is LM2902VDG suitable for a 24 V industrial supply?
The LM2902VDG is suitable for a nominal 24 V industrial supply when the total operating voltage remains within its specified 3 V to 32 V range and signal levels respect the input and output limits. The onsemi datasheet identifies a 3 V to 32 V operating capability. Include supply tolerance, transients, grounding, and temperature rise in the design so the actual rail never exceeds the absolute maximum rating.
Where to buy LM2902VDG online and what is its lead time?
Use the Request a Quote form on this page to ask for LM2902VDG availability, current lead time, minimum order quantity, and package allocation. The part is a cataloged onsemi LM2902 family member in a 14-SOIC package, and current distributor listings indicate broad market availability. The form provides a direct route to confirm the exact suffix, manufacturing condition, and shipment schedule for the planned build.
What is the price of LM2902VDG and is it in stock?
Request current LM2902VDG pricing and stock confirmation through the Request a Quote form on this page. The part is listed as in stock by a distributor, but inventory changes rapidly and the form should confirm the quantity, package suffix, and assembly schedule for your order. This avoids relying on a transient catalog price or availability statement that may not match the requested production quantity.
How should a LM2902VDG circuit be decoupled and laid out?
Place the manufacturer-recommended supply bypass capacitor close to the positive-supply and ground pins, and keep feedback and input traces short and away from high-current switching paths. The onsemi LM2902 application guidance emphasizes correct supply bypassing for stable amplifier operation. For sensitive sensor inputs, use a ground plane, minimize parasitic input capacitance, and place input networks close to the relevant amplifier pins.

工程參考資料,適用於 LM2902VDG — 比較、設計指引及合規資訊。

選型指南

Choose LM2902VDG when the design needs four general-purpose, true-differential-input amplifiers in a 14-SOIC package and can operate across a 3 V to 32 V positive supply. It is well suited to industrial sensor interfaces, current-sense amplifiers, control-loop error amplifiers, active filters, and general buffering where low cost and functional breadth matter more than rail-to-rail input or output operation. Choose onsemi LM2902DG, LM2902DG4, LM2902NSR, LM2902KPWR, or LM2902VDR2 when a specific onsemi ordering suffix better matches the required qualification, temperature grade, or packing. Choose TI LM2902D when the TI industry-standard LM2902 lineage and TI sourcing channel are preferred. For every alternative, confirm the exact pinout, supply range, common-mode limits, output swing, bandwidth, slew rate, offset, temperature grade, and lifecycle requirements before approving a drop-in change.

與替代品比較

參數 本產品 LM2902DG LM2902D LM2902NSR LM2902DG4 LM2902KPWR LM2902VDR2
Package 14-SOIC 14-SOIC 14-SOIC 14-SOIC 14-SOIC 14-SOIC 14-SOIC
Brand onsemi onsemi Texas Instruments onsemi onsemi onsemi onsemi
Amplifier Circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits
Input Configuration True differential input True differential input Differential input True differential input True differential input True differential input True differential input
Power Supply Type Single supply Single supply Single supply Single supply Single supply Single supply Single supply
Frequency Compensation Internally frequency compensated Internally frequency compensated Internally frequency compensated Internally frequency compensated Internally frequency compensated Internally frequency compensated Internally frequency compensated

主要差異化特點

  • Four independent general-purpose amplifiers in one package (對比LM2902D)
  • Wide positive-supply operating range (對比LM2902DG)
  • Direct LM2902-family ordering compatibility (對比LM2902KPWR)
  • Documented industry-standard family lineage (對比LM2902VDR2)

設計說明

Place the required bypass capacitor immediately between the positive-supply pin and ground pin of the LM2902VDG. Keep the path between pin 11 and the capacitor as short as possible, with a low-impedance ground return, because long supply loops can impair stability in high-gain or capacitive-load circuits. Route all four channels symmetrically where matching matters, and place feedback components directly beside their associated amplifier pins.

Do not design a zero-crossing comparator around a bipolar-input LM2902 without first establishing the required input common-mode voltage. In a single-supply circuit, bias the reference or signal above ground so both inputs remain within the datasheet common-mode range. Also verify output swing at the selected load. If the source can cross either supply rail or the comparator requires fast, controlled saturation, use a rail-to-rail-input amplifier or dedicated comparator instead.

Use a single solid ground reference for the analog section and connect shunt or sensor returns with a Kelvin path where accurate current sensing is required. Keep high-impedance input traces short, shield them where necessary, and avoid routing them beside switching-regulator outputs, relay traces, or high-current motor wiring. Separate feedback and compensation paths from digital return currents so switching noise does not enter the signal reference.

Verify the complete rail tolerance and transient range against the 3 V to 32 V operating specification before applying the LM2902VDG to a 24 V industrial bus. Include startup overshoot, supply ripple, inductive spikes, and regulator dropout margin. Input and output voltages must also remain inside their respective limits. Reverse-polarity, overvoltage, and short-circuit protection should be implemented outside the amplifier when the system environment can expose the device to those faults.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

No definitive RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 statements were identified for the exact LM2902VDG ordering code. These fields require confirmation from the current onsemi product declaration or ordering documentation.

相關搜尋

LM2902VDG datasheet LM2902VDG datasheet pdf LM2902VDG pinout LM2902VDG equivalent LM2902VDG replacement LM2902VDG cross reference LM2902VDG vs LM2902D LM2902VDG 14-SOIC LM2902VDG 3-32V op amp LM2902VDG industrial sensor amplifier onsemi LM2902VDG LM2902VDG price LM2902VDG stock LM2902VDG footprint

相關元件與詞彙

onsemi LM2902VDG LM2902DG LM2902D LM2902NSR LM2902DG4 LM2902KPWR LM2902VDR2 quad operational amplifier operational amplifier analog amplifier true differential input single-supply operation frequency compensation 14-SOIC SOIC family surface-mount package industrial sensor conditioning current-to-voltage conversion active filtering 3 V to 32 V supply Texas Instruments LM2902 family input common-mode range
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情