LM2902LVQDRQ1 - 4-Channel 5.5V Automotive Op Amp | TI
MPN: LM2902LVQDRQ1 ✓ 啟用中LM2902LVQDRQ1 概覽
An operational amplifier, commonly called an op amp, is a voltage-controlled differential amplifier with very high open-loop gain. Its high input impedance limits loading on the signal source, while negative feedback determines the closed-loop gain and bandwidth. Within the semiconductor hierarchy, an operational amplifier belongs to the amplifier IC and analog signal-processing categories. The LM2902LV-Q1 family is designed as a lower-voltage alternative to the wider-supply LM2902-Q1 family.
The principal features include four amplifiers in one 14-pin SOIC, operation from 2.7 V to 5.5 V, a 1 MHz gain-bandwidth product, and a 3 mV input offset voltage. The quad configuration reduces component count and PCB area when an application needs several independent gain stages. The automotive-oriented -Q1 ordering designation identifies the LM2902LV-Q1 qualification class, while the exact operating limits and qualification details should be confirmed in the manufacturer datasheet.
The architecture supports the conventional noninverting, inverting, summing, comparator-style, and voltage-following arrangements commonly used in analog signal conditioning. Because the amplifiers operate from a low-voltage supply, input and output common-mode and output-swing limits require attention near the supply rails. Stable operation also depends on suitable feedback networks, output loading, input bias-current paths, and the manufacturer-recommended bypassing.
Typical uses include automotive sensor interfaces, low-voltage transducer conditioning, current-loop receivers, control-signal amplification, and general instrumentation with multiple analog channels. The four integrated channels are particularly useful when several sensors or low-level signals must be conditioned close to a controller. For battery-powered or 5 V automotive electronics, the 2.7 V to 5.5 V supply range provides useful design headroom.
For layout, place the supply bypass capacitor close to the positive and ground pins and keep sensitive input traces short and away from switching nodes. Verify common-mode range, output swing, capacitive-load stability, and channel-to-channel layout in the final circuit. Decoupling and stability requirements should follow the pin description and application guidance in the Texas Instruments datasheet.
直接替換替代品,適用於 LM2902LVQDRQ1 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LM2902LVQDRQ1 (相同外形與佔位) — 差異在於 Gain-Bandwidth Product, Number of Amplifier Channels, Package, Product Type, Supply Configuration.
LM2902DR
✅ 直接替換聯絡詢價
查看資料表 →LM2902KDR
✅ 直接替換聯絡詢價
查看資料表 →LM2902KAVQDRDL
✅ 直接替換📋 參考替代品(不在目錄中)
LM2902LVQDRQ1 最大額定值與電氣特性
| Number of Amplifier Channels | 4 channels |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Gain-Bandwidth Product | 1 MHz |
| Input Offset Voltage | 3 mV |
| Amplifier Type | General-purpose operational amplifier |
| Automotive Qualification Class | -Q1 automotive class |
| 封裝 | 14-pin SOIC |
| Package Pin Count | 14 pins |
| 安裝類型 | Surface mount |
LM2902LVQDRQ1 腳位配置
| 腳位 1 | OUTA — Amplifier A output |
| 腳位 2 | INA- — Amplifier A inverting input |
| 腳位 3 | INA+ — Amplifier A noninverting input |
| 腳位 4 | V- — Negative supply connection |
| 腳位 5 | INB+ — Amplifier B noninverting input |
| 腳位 6 | INB- — Amplifier B inverting input |
| 腳位 7 | OUTB — Amplifier B output |
| 腳位 8 | OUTC — Amplifier C output |
| 腳位 9 | INC- — Amplifier C inverting input |
| 腳位 10 | INC+ — Amplifier C noninverting input |
| 腳位 11 | V+ — Positive supply connection |
| 腳位 12 | IND+ — Amplifier D noninverting input |
| 腳位 13 | IND- — Amplifier D inverting input |
| 腳位 14 | OUTD — Amplifier D output |
典型應用
LM2902LVQDRQ1 適用於 6 應用s: Automotive Sensor Signal Conditioning, Low-Voltage Current-Loop Receiver, Battery-Powered Monitoring Module, Control-System Analog Front End, Data-Acquisition Buffering, Interface and Level Conditioning.
Automotive Sensor Signal Conditioning
The LM2902LVQDRQ1 is suitable for conditioning several low-level automotive sensor signals because it integrates four general-purpose amplifiers in one 14-pin SOIC and operates from 2.7 V to 5.5 V. Individual channels can provide gain, inversion, filtering, or buffering while reducing the number of separate amplifier packages. Its 1 MHz gain-bandwidth product is appropriate for moderate-bandwidth sensor interfaces rather than precision measurement requiring substantially higher bandwidth or lower offset. Designers should verify the sensor output range against the input common-mode limits and assess the 3 mV offset against the smallest signal of interest.
推薦
Low-Voltage Current-Loop Receiver
A 4 mA to 20 mA industrial or vehicle current-loop receiver can use one LM2902LVQDRQ1 channel for signal amplification and another for filtering or an output buffer. The device's 2.7 V to 5.5 V operating range supports low-voltage systems, while the four-channel package leaves two amplifiers available for adjacent instrumentation functions. The 1 MHz bandwidth is substantially above the bandwidth normally required by a current-loop input, making loop stability and input filtering the main practical considerations. Verify common-mode range and output swing against the transmitter and sensor-ground requirements.
推薦
Battery-Powered Monitoring Module
The LM2902LVQDRQ1 fits battery-powered monitoring modules that operate from a regulated low-voltage rail because its 2.7 V to 5.5 V supply range covers common 3.3 V and 5 V systems. Four channels can amplify temperature, pressure, voltage, or current-sense signals without requiring four separate amplifier packages. This integration lowers board-area requirements, although each channel still needs an appropriate feedback network and input-bias path. Confirm quiescent-current and output-swing requirements for the final power budget and ensure the sensor signals remain inside the amplifier's common-mode range.
推薦
Control-System Analog Front End
A compact control system can use the four channels of the LM2902LVQDRQ1 for command-signal conditioning, feedback amplification, and active filtering. Its 2.7 V to 5.5 V range supports controller-centric electronics, and the 1 MHz gain-bandwidth product permits closed-loop gains that do not require wide-band precision amplification. The integrated quad arrangement simplifies board partitioning and can reduce analog routing complexity. For safety-critical or high-accuracy systems, engineers should review offset, noise, common-mode behavior, and qualification requirements in the manufacturer documentation rather than relying only on the headline specifications.
推薦
Data-Acquisition Buffering
The LM2902LVQDRQ1 can buffer multiple inputs in a small data-acquisition subsystem where four channels must share a common low-voltage supply. One channel may drive a sensing element while the others condition or isolate adjacent signals, reducing the need for separate buffer packages. The 1 MHz gain-bandwidth product supports general-purpose acquisition stages, while the 3 mV offset must be considered when amplifying small sensor outputs. Place input and feedback components close to their associated pins and check output loading and capacitive stability before using the device directly ahead of an analog-to-digital converter.
推薦
Interface and Level Conditioning
The LM2902LVQDRQ1 is useful in low-voltage interface circuits where a sensor, switch, or diagnostic line requires amplification or buffering before reaching a digital controller. Its 2.7 V to 5.5 V supply range aligns with many embedded automotive systems, and four channels allow several interface functions to be consolidated. Designers should provide input paths for bias current, limit transient inputs, and use the feedback network to set the closed-loop response. The final design must also confirm that the controller's input thresholds, signal polarity, and allowable propagation delay remain compatible with the amplifier configuration.
推薦
推薦產品摘要
工程參考資料,適用於 LM2902LVQDRQ1 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Package | 14-pin SOIC |
| Brand | Texas Instruments |
| Number of Amplifier Channels | 4 channels |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Gain-Bandwidth Product | 1 MHz |
| Input Offset Voltage | 3 mV |
| Product Class | General-purpose automotive operational amplifier |
| Automotive Qualification Class | -Q1 |
| Mounting Type | Surface mount |
主要差異化特點
- Four integrated low-voltage amplifier channels (對比LM2904LVQDRQ1)
- Low-voltage operating range aligned with 3.3 V and 5 V systems (對比LM2902QDRQ1)
- Compact integration in a standard 14-pin SOIC (對比LM2904LVQDRQ1)
設計說明
Place the supply bypass capacitor close to pin 11 and the negative-supply reference connection associated with the device, using the shortest practical trace and a nearby ground return. Keep feedback resistors and input components adjacent to the amplifier pins they serve. For a quad device, define each channel's signal flow on the PCB and avoid routing one channel's sensitive input beneath another channel's output or a switching-power supply region.
Do not treat a shared 14-pin SOIC footprint as sufficient proof that another amplifier is interchangeable. The replacement must preserve the four-channel pin assignment, 2.7 V to 5.5 V supply range, approximately 1 MHz bandwidth, approximately 3 mV offset, and required automotive qualification. Also verify input common-mode range and output swing; an amplifier can meet supply-voltage requirements while still being unable to process the sensor signal present at its input.
Keep input traces short, guard them against switching-node crosstalk, and use a stable reference or bias return for sources that cannot source or sink DC current. Choose resistor values so the closed-loop gain does not force the amplifier to exceed its intended bandwidth. If driving a long cable, sampling network, or large capacitive node, evaluate noise gain, phase margin, and the need for an isolation resistor against the manufacturer stability guidance.
合規資訊
The -Q1 ordering designation identifies an automotive product family, but the available product information does not state the exact RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Use the manufacturer datasheet and material declarations for compliance decisions.