Texas Instruments

LM2902LVQDRQ1 - 4-Channel 5.5V Automotive Op Amp | TI

料号: LM2902LVQDRQ1 ✓ 量产中
2.7 V to 5.5 V Vdss 14-pin SOIC Package
最小起订量: 1 |

LM2902LVQDRQ1 概述

The Texas Instruments LM2902LVQDRQ1 is a four-channel, low-voltage automotive operational amplifier with a 2.7 V to 5.5 V supply range, 1 MHz gain-bandwidth product, and 3 mV offset voltage, packaged in a 14-pin SOIC. The LM2902LV-Q1 family combines four general-purpose amplifiers in one package, making it suitable for cost-sensitive automotive systems that need multiple low-voltage signal-conditioning channels.

An operational amplifier, commonly called an op amp, is a voltage-controlled differential amplifier with very high open-loop gain. Its high input impedance limits loading on the signal source, while negative feedback determines the closed-loop gain and bandwidth. Within the semiconductor hierarchy, an operational amplifier belongs to the amplifier IC and analog signal-processing categories. The LM2902LV-Q1 family is designed as a lower-voltage alternative to the wider-supply LM2902-Q1 family.

The principal features include four amplifiers in one 14-pin SOIC, operation from 2.7 V to 5.5 V, a 1 MHz gain-bandwidth product, and a 3 mV input offset voltage. The quad configuration reduces component count and PCB area when an application needs several independent gain stages. The automotive-oriented -Q1 ordering designation identifies the LM2902LV-Q1 qualification class, while the exact operating limits and qualification details should be confirmed in the manufacturer datasheet.

The architecture supports the conventional noninverting, inverting, summing, comparator-style, and voltage-following arrangements commonly used in analog signal conditioning. Because the amplifiers operate from a low-voltage supply, input and output common-mode and output-swing limits require attention near the supply rails. Stable operation also depends on suitable feedback networks, output loading, input bias-current paths, and the manufacturer-recommended bypassing.

Typical uses include automotive sensor interfaces, low-voltage transducer conditioning, current-loop receivers, control-signal amplification, and general instrumentation with multiple analog channels. The four integrated channels are particularly useful when several sensors or low-level signals must be conditioned close to a controller. For battery-powered or 5 V automotive electronics, the 2.7 V to 5.5 V supply range provides useful design headroom.

For layout, place the supply bypass capacitor close to the positive and ground pins and keep sensitive input traces short and away from switching nodes. Verify common-mode range, output swing, capacitive-load stability, and channel-to-channel layout in the final circuit. Decoupling and stability requirements should follow the pin description and application guidance in the Texas Instruments datasheet.

直接替换替代料: LM2902LVQDRQ1 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: LM2902LVQDRQ1 (相同外形与封装尺寸) ——差异在于 Gain-Bandwidth Product, Number of Amplifier Channels, Package, Product Type, Supply Configuration.

Texas Instruments
Number of Amplifier Channels: 4
Package: 14-SOIC
Product Type: Quad operational amplifier
对比 LM2902LVQDRQ1 →
Texas Instruments
Gain-Bandwidth Product: 1.2 MHz
Product Type: General-purpose operational amplifier
Supply Configuration: Single or dual supply
对比 LM2902LVQDRQ1 →

LM2902DR

✅ 直接替换
Texas Instruments
📦 14-SOIC
Quad operational amplifier · 4 · 26 V · 1.2 MHz · 2 mV · Single supply or split supply · Push-pull

联系询价

查看数据手册 →

LM2902KDR

✅ 直接替换
Texas Instruments
📦 14-SOIC
4 circuits · General-purpose operational amplifier · 26 V · 3 V to 26 V · 1.2 MHz · 2 kV · -40°C to +125°C · 14-pin SOIC

联系询价

查看数据手册 →

LM2902KAVQDRDL

✅ 直接替换
📦 14-SOIC
Automotive quad LM2902-family device in a 14-lead package; it uses the higher-voltage LM2902 architecture rather than the 2.7 V to 5.5 V LM2902LV architecture

📋 参考替代料(不在目录中)

LM2902LVQDRQ1 最大额定值与电气特性

Number of Amplifier Channels 4 channels
Supply Voltage Range 2.7 V to 5.5 V
Gain-Bandwidth Product 1 MHz
Input Offset Voltage 3 mV
Amplifier Type General-purpose operational amplifier
Automotive Qualification Class -Q1 automotive class
封装 14-pin SOIC
Package Pin Count 14 pins
安装类型 Surface mount

LM2902LVQDRQ1 引脚配置

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
引脚 1 OUTA — Amplifier A output
引脚 2 INA- — Amplifier A inverting input
引脚 3 INA+ — Amplifier A noninverting input
引脚 4 V- — Negative supply connection
引脚 5 INB+ — Amplifier B noninverting input
引脚 6 INB- — Amplifier B inverting input
引脚 7 OUTB — Amplifier B output
引脚 8 OUTC — Amplifier C output
引脚 9 INC- — Amplifier C inverting input
引脚 10 INC+ — Amplifier C noninverting input
引脚 11 V+ — Positive supply connection
引脚 12 IND+ — Amplifier D noninverting input
引脚 13 IND- — Amplifier D inverting input
引脚 14 OUTD — Amplifier D output

典型应用

LM2902LVQDRQ1 适用于 6 应用s: Automotive Sensor Signal Conditioning, Low-Voltage Current-Loop Receiver, Battery-Powered Monitoring Module, Control-System Analog Front End, Data-Acquisition Buffering, Interface and Level Conditioning.

🚗

Automotive Sensor Signal Conditioning

The LM2902LVQDRQ1 is suitable for conditioning several low-level automotive sensor signals because it integrates four general-purpose amplifiers in one 14-pin SOIC and operates from 2.7 V to 5.5 V. Individual channels can provide gain, inversion, filtering, or buffering while reducing the number of separate amplifier packages. Its 1 MHz gain-bandwidth product is appropriate for moderate-bandwidth sensor interfaces rather than precision measurement requiring substantially higher bandwidth or lower offset. Designers should verify the sensor output range against the input common-mode limits and assess the 3 mV offset against the smallest signal of interest.

🏭

Low-Voltage Current-Loop Receiver

A 4 mA to 20 mA industrial or vehicle current-loop receiver can use one LM2902LVQDRQ1 channel for signal amplification and another for filtering or an output buffer. The device's 2.7 V to 5.5 V operating range supports low-voltage systems, while the four-channel package leaves two amplifiers available for adjacent instrumentation functions. The 1 MHz bandwidth is substantially above the bandwidth normally required by a current-loop input, making loop stability and input filtering the main practical considerations. Verify common-mode range and output swing against the transmitter and sensor-ground requirements.

🔋

Battery-Powered Monitoring Module

The LM2902LVQDRQ1 fits battery-powered monitoring modules that operate from a regulated low-voltage rail because its 2.7 V to 5.5 V supply range covers common 3.3 V and 5 V systems. Four channels can amplify temperature, pressure, voltage, or current-sense signals without requiring four separate amplifier packages. This integration lowers board-area requirements, although each channel still needs an appropriate feedback network and input-bias path. Confirm quiescent-current and output-swing requirements for the final power budget and ensure the sensor signals remain inside the amplifier's common-mode range.

⚙️

Control-System Analog Front End

A compact control system can use the four channels of the LM2902LVQDRQ1 for command-signal conditioning, feedback amplification, and active filtering. Its 2.7 V to 5.5 V range supports controller-centric electronics, and the 1 MHz gain-bandwidth product permits closed-loop gains that do not require wide-band precision amplification. The integrated quad arrangement simplifies board partitioning and can reduce analog routing complexity. For safety-critical or high-accuracy systems, engineers should review offset, noise, common-mode behavior, and qualification requirements in the manufacturer documentation rather than relying only on the headline specifications.

📊

Data-Acquisition Buffering

The LM2902LVQDRQ1 can buffer multiple inputs in a small data-acquisition subsystem where four channels must share a common low-voltage supply. One channel may drive a sensing element while the others condition or isolate adjacent signals, reducing the need for separate buffer packages. The 1 MHz gain-bandwidth product supports general-purpose acquisition stages, while the 3 mV offset must be considered when amplifying small sensor outputs. Place input and feedback components close to their associated pins and check output loading and capacitive stability before using the device directly ahead of an analog-to-digital converter.

🔌

Interface and Level Conditioning

The LM2902LVQDRQ1 is useful in low-voltage interface circuits where a sensor, switch, or diagnostic line requires amplification or buffering before reaching a digital controller. Its 2.7 V to 5.5 V supply range aligns with many embedded automotive systems, and four channels allow several interface functions to be consolidated. Designers should provide input paths for bias current, limit transient inputs, and use the feedback network to set the closed-loop response. The final design must also confirm that the controller's input thresholds, signal polarity, and allowable propagation delay remain compatible with the amplifier configuration.

What is the operating voltage of LM2902LVQDRQ1?
The LM2902LVQDRQ1 operates from a 2.7 V minimum supply to a 5.5 V maximum supply. According to the Texas Instruments LM2902LV-Q1 product information, the low-voltage family is intended for 2.7 V to 5.5 V operation and provides an alternative to the wider-supply LM2902-Q1 devices. Designers should confirm that every signal connected to an input or output remains within the amplifier's specified common-mode and output-swing limits.
What are the key specifications of LM2902LVQDRQ1 that engineers should know?
The LM2902LVQDRQ1 is a four-channel general-purpose operational amplifier with a 2.7 V to 5.5 V supply range, 1 MHz gain-bandwidth product, and 3 mV input offset voltage. Texas Instruments identifies the device in a 14-pin SOIC package. The four-channel arrangement consolidates independent analog signal-conditioning stages into one device, reducing board area and component count in low-voltage automotive electronics.
Where can I download the LM2902LVQDRQ1 datasheet PDF?
The official LM2902LVQDRQ1 documentation is available from the Texas Instruments LM2902LV-Q1 product page and its linked manufacturer datasheet. The datasheet contains the complete ordering information, electrical characteristics, pin assignments, application guidance, and automotive qualification details for the LM2902LV-Q1 family. Use the 14-pin SOIC pinout and electrical tables corresponding specifically to LM2902LVQDRQ1 when finalizing a PCB design.
Where can I find the LM2902LVQDRQ1 pinout?
The LM2902LVQDRQ1 uses a standard 14-pin SOIC arrangement containing four operational amplifiers. Pins 1 through 7 support amplifiers A and B, pins 8 through 11 support amplifier C and the positive supply connection, and pins 12 through 14 support amplifier D. Use the manufacturer pin-description table when assigning PCB tracks because exposed-pad, alternate-function, and package-option details are governed by the exact ordering code.
Is LM2902LVQDRQ1 suitable for automotive applications?
The LM2902LVQDRQ1 belongs to Texas Instruments' LM2902LV-Q1 automotive product family. Its -Q1 designation identifies the automotive qualification class, while its 2.7 V to 5.5 V operating range suits low-voltage vehicle electronics. The manufacturer datasheet remains the controlling document for temperature grade, AEC-Q100 qualification status, production qualification, and any application-specific requirements.
What can replace LM2902LVQDRQ1?
A true drop-in replacement for LM2902LVQDRQ1 must use the same 14-pin SOIC footprint, preserve the four-amplifier pin assignment, and remain electrically close across the 2.7 V to 5.5 V supply range, 1 MHz bandwidth, and 3 mV offset targets. The available cross-reference material confirms the LM2902LV-Q1 family but does not identify five separately qualified pin-compatible devices. Confirm the exact replacement MPN, temperature grade, automotive status, and electrical limits before changing the BOM.
Is LM2902LVQDRQ1 the same as LM2902QDRQ1?
No. The LM2902LVQDRQ1 belongs to the low-voltage LM2902LV-Q1 family with a 2.7 V to 5.5 V supply range, whereas the LM2902-Q1 family is associated with wider high-voltage operation. The packages may follow an industry-standard 14-pin SOIC pattern, but a shared footprint alone does not make the devices interchangeable. Verify input common-mode range, output swing, supply voltage, offset, bandwidth, and qualification.
When should I choose LM2902LVQDRQ1 over LM2902QDRQ1?
Choose LM2902LVQDRQ1 when the circuit operates from a 2.7 V to 5.5 V rail and benefits from the low-voltage LM2902LV-Q1 family. Choose LM2902QDRQ1 only when the design requires the wider supply capability of the LM2902-Q1 family. The decision should be based on the actual rail voltage, signal amplitude, required common-mode range, automotive qualification, and thermal conditions rather than package similarity alone.
What is the best Texas Instruments equivalent for LM2902LVQDRQ1?
The closest identified Texas Instruments option is another qualified orderable member of the LM2902LV-Q1 family that uses the same 14-pin SOIC footprint and electrical configuration. The target itself is the most direct match for an exact procurement requirement. The cross-reference results do not establish five distinct drop-in devices with independently verified automotive qualification, so use the Request a Quote form to identify the currently orderable suffix and documentation for the required temperature grade.
How is LM2902LVQDRQ1 used in a sensor signal-conditioning circuit?
A common application uses one amplifier channel to amplify a low-level sensor signal and another channel for filtering, buffering, or biasing. The LM2902LVQDRQ1 provides four amplifiers in one 14-pin SOIC, which is useful when several sensor outputs must be conditioned near a controller. Its 1 MHz gain-bandwidth product supports moderate-bandwidth closed-loop stages, while the 3 mV offset specification must be evaluated against the sensor's signal range.
What power-supply decoupling does LM2902LVQDRQ1 require?
The LM2902LVQDRQ1 should be decoupled near its supply pins with the capacitance and layout recommended in the Texas Instruments datasheet. Place the bypass capacitor close to the positive-supply and ground connections, use a short ground return, and avoid routing input traces beside switching or high-current paths. Adequate local bypass helps maintain the 2.7 V to 5.5 V operating range and reduces supply ripple coupled into the amplifier outputs.
Can LM2902LVQDRQ1 drive a capacitive load?
The LM2902LVQDRQ1 can be used with capacitive loads only when the capacitance, loop gain, and stability conditions remain within the manufacturer's guidance. The verified product information identifies a 1 MHz gain-bandwidth product but does not provide a capacitive-load stability curve. Before adding a large capacitor directly to an output, consult the manufacturer datasheet for the required isolation resistor and stability limits.
Where to buy LM2902LVQDRQ1 online?
Use the Request a Quote form on this page to request LM2902LVQDRQ1 pricing, current inventory, order quantities, and lead time. The form is the direct route for an engineering quotation without relying on stale marketplace listings. Include your required quantity, date code policy, delivery location, and whether you need an automotive-grade traceable shipment so the quote can reflect those requirements.
What is the price of LM2902LVQDRQ1?
Current commercial terms for LM2902LVQDRQ1 should be obtained through the Request a Quote form on this page. The structured pricing area is updated for the exact ordering code, quantity, currency, and packaging configuration. Submit the required quantity and supply destination so the quotation reflects the current component and logistics terms instead of a historical or family-level price.
What is the lead time for LM2902LVQDRQ1?
The current lead time for LM2902LVQDRQ1 depends on available inventory, manufacturing status, order quantity, and date-code requirements. Request a quote on this page and state the required quantity, target delivery date, and traceability needs. The manufacturer product page can be used to confirm the current ordering designation while the quotation process establishes the actionable schedule.
Is LM2902LVQDRQ1 in stock?
Current LM2902LVQDRQ1 stock should be checked through the Request a Quote form on this page because availability can change with order volume and traceability requirements. Provide your required quantity, package code, and delivery date. The quote response should confirm current availability, order processing time, and any lot or date-code constraints for the exact LM2902LVQDRQ1 ordering code.

工程参考数据: LM2902LVQDRQ1 ——对比、设计指导和合规信息。

选型指南

Choose LM2902LVQDRQ1 when a design requires four general-purpose amplifier channels, operates from a 2.7 V to 5.5 V rail, and benefits from the automotive-oriented LM2902LV-Q1 family. Its 1 MHz bandwidth and 3 mV offset fit moderate-bandwidth signal conditioning rather than precision or high-speed instrumentation. Choose the dual LM2904LVQDRQ1 when only two channels are required and package count matters less than using the quad device. Choose an LM2902-Q1-family device when the circuit requires a substantially wider supply range. No separately verified drop-in replacement set was established because the cross-reference results identify family and lookup tools without confirming five distinct 14-pin SOIC devices with compatible electrical ratings and automotive qualification. Validate any proposed substitute against supply voltage, common-mode range, output swing, offset, bandwidth, slew rate, noise, temperature grade, and AEC-Q100 status before releasing it to production.

与替代料对比

参数 本产品
Package 14-pin SOIC
Brand Texas Instruments
Number of Amplifier Channels 4 channels
Supply Voltage Range 2.7 V to 5.5 V
Gain-Bandwidth Product 1 MHz
Input Offset Voltage 3 mV
Product Class General-purpose automotive operational amplifier
Automotive Qualification Class -Q1
Mounting Type Surface mount

关键差异点

  • Four integrated low-voltage amplifier channels (对比 LM2904LVQDRQ1)
  • Low-voltage operating range aligned with 3.3 V and 5 V systems (对比 LM2902QDRQ1)
  • Compact integration in a standard 14-pin SOIC (对比 LM2904LVQDRQ1)

设计说明

Place the supply bypass capacitor close to pin 11 and the negative-supply reference connection associated with the device, using the shortest practical trace and a nearby ground return. Keep feedback resistors and input components adjacent to the amplifier pins they serve. For a quad device, define each channel's signal flow on the PCB and avoid routing one channel's sensitive input beneath another channel's output or a switching-power supply region.

Do not treat a shared 14-pin SOIC footprint as sufficient proof that another amplifier is interchangeable. The replacement must preserve the four-channel pin assignment, 2.7 V to 5.5 V supply range, approximately 1 MHz bandwidth, approximately 3 mV offset, and required automotive qualification. Also verify input common-mode range and output swing; an amplifier can meet supply-voltage requirements while still being unable to process the sensor signal present at its input.

Keep input traces short, guard them against switching-node crosstalk, and use a stable reference or bias return for sources that cannot source or sink DC current. Choose resistor values so the closed-loop gain does not force the amplifier to exceed its intended bandwidth. If driving a long cable, sampling network, or large capacitive node, evaluate noise gain, phase margin, and the need for an isolation resistor against the manufacturer stability guidance.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The -Q1 ordering designation identifies an automotive product family, but the available product information does not state the exact RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Use the manufacturer datasheet and material declarations for compliance decisions.

相关搜索

LM2902LVQDRQ1 datasheet LM2902LVQDRQ1 pinout LM2902LVQDRQ1 datasheet pdf LM2902LVQDRQ1 equivalent LM2902LVQDRQ1 replacement LM2902LVQDRQ1 cross reference LM2902LVQDRQ1 footprint LM2902LVQDRQ1 application circuit LM2902LVQDRQ1 price LM2902LVQDRQ1 stock Texas Instruments LM2902LVQDRQ1 LM2902LVQDRQ1 vs LM2902QDRQ1 LM2902LVQDRQ1 vs LM2904LVQDRQ1 LM2902LV 14-SOIC pinout LM2902LV 5.5V op amp

相关元器件 & 术语

Texas Instruments LM2902LVQDRQ1 LM2902LV-Q1 LM2904LVQDRQ1 LM2902QDRQ1 operational amplifier op amp quad operational amplifier general-purpose amplifier analog signal conditioning 2.7 V to 5.5 V power supply 1 MHz gain-bandwidth product 3 mV input offset voltage 14-pin SOIC SOIC package family surface-mount package SMD automotive electronics sensor interface current-loop receiver AEC-Q100 RoHS REACH LM290xLV-Q1 family
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情