STMicroelectronics

LM2902WYDT - 1.3MHz Quad Op Amp | STMicroelectronics

MPN: LM2902WYDT ✓ 啟用中
375 uA Vdss 20 nA Id 14-SO Package Internal Speed
MOQ: 1 |

LM2902WYDT 概覽

The STMicroelectronics LM2902WYDT is a low-power quad operational amplifier containing four independent, internally frequency-compensated amplifiers with push-pull outputs. It operates from a single supply, provides a 1.3 MHz gain-bandwidth product, offers 100 dB open-loop gain, and is packaged in the 14-pin SOIC form designated 14-SO. The device is intended for general-purpose signal conditioning across industrial and instrumentation systems.

A quad operational amplifier combines four amplifiers in one package, reducing component count and simplifying board layout. In the broader electronics hierarchy, an operational amplifier is an analog amplifier IC used within signal chains and measurement systems. Each LM2902WYDT amplifier can perform common functions such as voltage buffering, amplification, filtering, comparison, and differential input conditioning, depending on the feedback network and surrounding components.

The principal characteristics include 1.3 MHz gain-bandwidth performance, 100 dB open-loop gain, 375 uA supply current, 20 nA input offset current, 2 nA input bias current, and an 800 V input differential voltage rating. Internal frequency compensation allows the amplifiers to operate as stable unity-gain buffers without external compensation components. Push-pull outputs support bidirectional output current required by many closed-loop amplifier configurations.

The device uses four independent amplifiers, so one package can implement several analog functions on the same board. Its low-power operating characteristics are useful when multiple amplifier channels are required, while the 1.3 MHz bandwidth is suitable for general-purpose industrial signal paths rather than precision high-frequency instrumentation. The 800 V maximum differential input voltage provides substantial headroom for signal transients, although correct input protection and common-mode analysis remain necessary in each application.

Typical uses include industrial sensor conditioning, transducer amplification, audio preamplifier stages, active filters, differential amplifiers, and general instrumentation. Four independent channels can reduce the number of packages required in multi-channel analog boards. Each amplifier uses the same electrical architecture, allowing designers to assign separate signal paths while sharing common supply and decoupling arrangements.

For PCB implementation, place the power-bypass capacitor close to the supply pin and route feedback connections to minimize parasitic pickup. Keep sensitive input nodes away from high-current output and supply paths. Decoupling requirements, stable operating points, input common-mode limits, and output-swing limits must be checked against the manufacturer datasheet for the selected supply voltage and load.

This product record combines the manufacturer functional description with distributor part identification, package information, key electrical ratings, sourcing access, drop-in alternatives, and practical application guidance. It helps engineers move from datasheet review to PCB-level implementation while keeping the LM2902WYDT's four-channel architecture and electrical boundaries central to component selection.

直接替換替代品,適用於 LM2902WYDT — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: LM2902WYDT (相同外形與佔位) — 差異在於 Amplifier Type, Input Bias Current, Package, Gain-Bandwidth Product, Input Offset Current.

STMicroelectronics
Amplifier Type: General-purpose operational amplifier
Input Bias Current: 20 nA
Input Offset Current: 2 nA
比較對象 LM2902WYDT →
Texas Instruments
Amplifier Type: General purpose
Input Bias Current: -0.5 µA
Package: 14-SOIC
比較對象 LM2902WYDT →
STMicroelectronics
Package: 14-SOIC
比較對象 LM2902WYDT →

LM2902AWYDT

✅ 直接替換
STMicroelectronics
📦 14-SO
General-purpose operational amplifier · 4 amplifiers · 1.3 MHz · 100 dB · 375 uA · 20 nA · 2 nA · 800 V

聯絡詢價

查看資料表 →

LM2902HYDT

✅ 直接替換
📦 14-SO
Same LM2902W quad-amplifier family and 14-SO configuration; grade-specific limits are not quantified in the comparison listing

📋 參考替代品(不在目錄中)

LM2902KVQDRQ1

✅ 直接替換
Texas Instruments
📦 14-SO
4 channels · 26 V · 1.2 MHz · 2 mV · 80 dB · 0.5 V/µs · -0.5 µA · -55 °C to +125 °C

聯絡詢價

查看資料表 →

LM2902WDT

✅ 直接替換
STMicroelectronics
📦 14-SO
Quad Operational Amplifier · 4 circuits · General Purpose · 3 V to 32 V · 3 V to 32 V · 3 V to 32 V · ±15 V / 30 V total · 1 MHz

聯絡詢價

查看資料表 →

LM2902WYPT

✅ 直接替換
STMicroelectronics
📦 14-SO
4 amplifiers · Low-power quad operational amplifier · 1.3 MHz · 100 dB · 375 uA · 20 nA · 2 nA · 800 V

聯絡詢價

查看資料表 →

LM2902WYDT 最大額定值與電氣特性

Number of Amplifiers 4 circuits
Amplifier Type Standard general-purpose operational amplifier
Gain-Bandwidth Product 1.3 MHz
Open-Loop Gain 100 dB
供應電流 375 uA
Input Offset Current 20 nA
Input Bias Current 2 nA
Maximum Differential Input Voltage 800 V
輸出類型 Push-pull
Frequency Compensation Internal
Number of Independent Amplifiers 4 independent amplifiers
封裝 14-SO
安裝類型 Surface mount
RoHS 狀態 RoHS compliant

LM2902WYDT 腳位配置

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
腳位 1 OUT1 — Amplifier 1 output
腳位 2 IN1- — Amplifier 1 inverting input
腳位 3 IN1+ — Amplifier 1 non-inverting input
腳位 4 VCC+ — Positive supply voltage
腳位 5 IN2+ — Amplifier 2 non-inverting input
腳位 6 IN2- — Amplifier 2 inverting input
腳位 7 OUT2 — Amplifier 2 output
腳位 8 OUT3 — Amplifier 3 output
腳位 9 IN3- — Amplifier 3 inverting input
腳位 10 IN3+ — Amplifier 3 non-inverting input
腳位 11 VCC- — Negative supply voltage
腳位 12 IN4+ — Amplifier 4 non-inverting input
腳位 13 IN4- — Amplifier 4 inverting input
腳位 14 OUT4 — Amplifier 4 output

典型應用

LM2902WYDT 適用於 6 應用s: Industrial Sensor Signal Conditioning, Audio Preamplifier and Mixer Stages, Active Filters and Equalization, Transducer and Bridge Interface Circuits, Data Acquisition and Instrumentation, Control-System Amplifier and Comparator Network.

🏭

Industrial Sensor Signal Conditioning

The LM2902WYDT is well suited to conditioning low-level signals from industrial sensors because it provides four independent, internally compensated amplifiers in one 14-SO package. The 2 nA input bias current and 20 nA input offset current are useful when driving relatively high source impedances, while 100 dB open-loop gain supports accurate closed-loop amplification. Designers can combine the channels for a noninverting front end, an inverting stage, a difference amplifier, and an active filter. The 1.3 MHz gain-bandwidth product is adequate for many process-control and factory-sensing signals, although the selected resistor and capacitor values must keep closed-loop bandwidth below the amplifier's capabilities.

🎧

Audio Preamplifier and Mixer Stages

The four push-pull amplifier channels in the LM2902WYDT can implement separate preamplifier, summing, buffering, or active-filter stages in a general-purpose audio board. Push-pull outputs allow each closed-loop stage to source and sink output current, which is important when driving the next stage rather than operating only as a passive-biased output. The 1.3 MHz gain-bandwidth product covers a broad range of audio-band signal paths, and 100 dB open-loop gain can support high closed-loop gain when operating within the stable bandwidth. For low-noise audio designs, verify input-voltage and input-current noise, output distortion, supply ripple sensitivity, and output-swing limits against the manufacturer datasheet.

🔧

Active Filters and Equalization

A single LM2902WYDT package can implement several stages of active low-pass, high-pass, or band-pass filtering because it contains four independent, internally compensated amplifiers. Internal compensation removes the need for an external frequency-compensation capacitor in unity-gain voltage-follower service. The 1.3 MHz gain-bandwidth product gives ample bandwidth for many audio, control, and measurement filters, while 100 dB open-loop gain supports high-Q filter designs when component tolerances and stability are properly controlled. Use conventional resistor-capacitor networks around each channel, keep the feedback loop short, and verify phase margin and expected gain error with the selected topology. The same package can also combine filtering with an output buffer.

📊

Transducer and Bridge Interface Circuits

The LM2902WYDT can form the analog front end for resistive, strain-gauge, or bridge-based transducers where four channels support excitation buffering, differential sensing, amplification, and output filtering. Its 2 nA input bias current helps reduce loading on high-impedance sensor networks, while the 20 nA input offset-current rating provides a basis for evaluating output-referred error in sensitive stages. Differential amplifier and instrumentation-style arrangements require close attention to resistor-ratio matching, common-mode input range, and output swing. Because the input-stage characteristics are shared across the four channels, matched network layout and thermal conditions help preserve channel-to-channel consistency.

🖥️

Data Acquisition and Instrumentation

The LM2902WYDT can provide several gain and buffering functions around an acquisition circuit without requiring four separate amplifier packages. A practical arrangement may use one channel to amplify the sensor output, one as a unity-gain buffer, another for offset correction, and a fourth for driving the analog-to-digital converter input. The 1.3 MHz gain-bandwidth product is suitable for many moderate-speed acquisition channels, while the 100 dB open-loop gain supports accurate closed-loop performance at lower signal frequencies. Check the selected ADC's input range against the amplifier's output-swing capability, and confirm that the operating supply and common-mode range satisfy the sensor's signal excursion.

🏗️

Control-System Amplifier and Comparator Network

The LM2902WYDT supports compact analog control systems requiring amplification, comparison, filtering, and output buffering within one package. Four independent channels can reduce board area in feedback-control loops, actuator-driver interfaces, and threshold-detection circuits. The internal frequency compensation and push-pull output stage make the amplifiers convenient for closed-loop voltage-follower and inverting configurations, while the 1.3 MHz bandwidth covers many slow industrial control loops. Comparator operation still requires attention to output saturation recovery, input offset, noise around the threshold, and settling time. Verify that the control signal remains within the specified common-mode range and that the load current stays within the output-stage limits.

What is the operating voltage of LM2902WYDT?
The LM2902WYDT is a single-supply quad operational amplifier, but its precise minimum and maximum supply voltages must be taken from the manufacturer datasheet. The device is identified as a low-power operational amplifier with four independent, internally compensated amplifiers. Its confirmed operating characteristics include 1.3 MHz gain-bandwidth product, 100 dB open-loop gain, and 375 uA supply current. Confirm the permitted supply range and common-mode limits before constructing the power rails.
What are the key specifications of LM2902WYDT that engineers should know?
The LM2902WYDT integrates four independent, internally compensated general-purpose operational amplifiers with push-pull outputs in a 14-SO package. Its principal specifications include a 1.3 MHz gain-bandwidth product, 100 dB open-loop gain, 375 uA supply current, 20 nA input offset current, and 2 nA input bias current. The maximum differential input voltage is 800 V. These ratings make the device suitable for ordinary industrial signal-conditioning, buffering, filtering, and transducer-interface circuits.
Where can I download the LM2902WYDT datasheet PDF?
The manufacturer datasheet is available from STMicroelectronics through the LM2902W product page at st.com, while the LM2902WYDT-specific PDF can also be reached through the linked datasheet listing. The manufacturer describes the circuit as four independent, high-gain operational amplifiers with internal frequency compensation. Use the manufacturer document for the authoritative pin configuration, electrical limits, recommended operating conditions, and characteristic curves.
Where can I find the LM2902WYDT pinout?
The LM2902WYDT pinout is shown in the manufacturer datasheet for the 14-SO package. Its standard dual-in-line surface-mount arrangement assigns the four amplifier channels consecutively across the package, with power and ground pins serving the internal amplifiers. Before assigning PCB nets, use the pin-description table and package drawing in the manufacturer datasheet to verify every input, output, supply, and ground connection.
Is LM2902WYDT suitable for instrumentation amplifier applications?
Yes, LM2902WYDT is suitable for many instrumentation and transducer-signal conditioning applications when its bandwidth, input current, common-mode limits, and output-swing limits meet the system requirements. Its four independent channels can implement noninverting and inverting gain stages, difference amplifiers, and active filters. The 1.3 MHz gain-bandwidth product is adequate for many general-purpose industrial signals, while the 2 nA input bias current is particularly useful with high-impedance sources.
What is the difference between LM2902WYDT and LM2902AWYDT?
LM2902WYDT and LM2902AWYDT are both listed as STMicroelectronics standard general-purpose, four-circuit push-pull amplifiers in the 14-SO package. The available product records establish the same circuit count, output architecture, and package format. Their exact grading and ordering-code distinctions must be confirmed from the STMicroelectronics ordering information. Both are mechanically positioned as pin-compatible choices, but the required operating-temperature grade should govern final substitution.
When should I choose LM2902WYDT over LM324?
Choose LM2902WYDT when a compact 14-pin quad general-purpose amplifier with push-pull outputs and a 1.3 MHz gain-bandwidth product is required. The LM324 family is also widely used for general-purpose amplification, but it typically uses a different package and output architecture, so it cannot be assumed to be a pin-for-pin replacement. Confirm rail-to-rail behavior, input common-mode range, output swing, noise, and compensation requirements for the specific circuit.
What is the best drop-in replacement for LM2902WYDT?
The closest documented drop-in choices are STMicroelectronics orderable variants sharing the 14-SO, four-amplifier configuration, including LM2902AWYDT, LM2902HYDT, LM2902WDT, and LM2902KVQDR. Mechanical fit and channel count are confirmed, but a safe engineering substitution also requires matching the exact temperature grade, supply range, input common-mode limits, offset limits, and output-swing behavior. Verify the manufacturer ordering table before replacing the fitted device.
Can LM2902AWYDT replace LM2902WYDT?
LM2902AWYDT can be considered a mechanical drop-in candidate because it is listed as a four-circuit, push-pull STMicroelectronics amplifier in the same 14-SO package. Electrical equivalence still depends on matching the required temperature grade and operating limits. Review the ordering codes, absolute maximum ratings, common-mode input range, output swing, and supply range in the relevant manufacturer datasheets before approving the substitution.
Is LM2902WYDT the same as LM2902HYDT?
LM2902WYDT and LM2902HYDT are not necessarily identical in every ordering attribute, although both belong to the LM2902W family and are compared as 14-SO quad operational-amplifier variants. The suffix may encode a different grade or qualification status. Confirm the exact suffix meaning, temperature range, and qualification requirements on the STMicroelectronics product page and ordering table rather than assuming functional equivalence.
What can replace LM2902WYDT on an existing PCB?
An existing 14-SO PCB can accept a replacement that preserves the same pin functions, four-amplifier architecture, supply arrangement, and required electrical limits. The documented candidates are LM2902AWYDT, LM2902HYDT, LM2902WDT, and LM2902KVQDR. Compare the pin table and critical ratings for each candidate, especially common-mode input range, output swing, temperature grade, and qualification. Do not substitute a differently packaged quad amplifier without redrawing the footprint.
What is the best STMicroelectronics equivalent for LM2902WYDT?
Among the documented STMicroelectronics variants, LM2902AWYDT is the most directly identified alternative because its listing describes the same four-circuit push-pull amplifier in a 14-SO package. LM2902HYDT, LM2902WDT, and LM2902KVQDR are additional family candidates. Selection should be based on suffix-specific grade and rating requirements rather than package similarity alone. Use the manufacturer ordering information to finalize an equivalent part.
Where to buy LM2902WYDT online?
The LM2902WYDT can be requested through the Request a Quote form on this product page. The manufacturer product page and authorized distribution records identify the part as an active STMicroelectronics 14-SO quad operational amplifier. For purchasing, provide the exact MPN, required quantity, and shipment destination so current commercial terms and availability can be confirmed without relying on a stale catalog record.
What is the price of LM2902WYDT?
The current commercial price for LM2902WYDT should be obtained through the Request a Quote form on this page because pricing and availability can change with quantity, market conditions, and component turnover. Use the exact manufacturer part number LM2902WYDT when requesting a quotation. The platform can confirm the current unit terms, quantity breaks, authorized-channel availability, and expected fulfillment schedule.
What is the lead time for LM2902WYDT?
The current lead time for LM2902WYDT should be confirmed through the Request a Quote form on this page. Submit the required quantity, target date, and shipment destination for a current commitment. Because the device is identified as a standard STMicroelectronics quad operational amplifier, an exact delivery promise depends on factory inventory, regional logistics, and the quantity reserved for your order.
Is LM2902WYDT in stock?
Live inventory for LM2902WYDT should be confirmed through the Request a Quote form on this page. Include the required order quantity and delivery location so the current channel can be checked against the exact 14-SO orderable suffix. The manufacturer's active product listing identifies the LM2902W family, while commercial availability and allocation can vary independently of the device's lifecycle status.

工程參考資料,適用於 LM2902WYDT — 比較、設計指引及合規資訊。

選型指南

Choose LM2902WYDT when the design needs four independent, internally compensated general-purpose amplifiers in a 14-SO package, with 1.3 MHz gain-bandwidth product, 100 dB open-loop gain, 375 uA supply current, and push-pull outputs. Select LM2902AWYDT when its suffix-specific grade better matches the installation while retaining the documented four-circuit 14-SO architecture. Consider LM2902HYDT, LM2902KVQDR, LM2902WDT, or LM2902WYPT only after confirming their ordering attributes, qualification requirements, temperature grade, and electrical limits against the target design. These alternatives share the LM2902W family footprint, but suffix-level differences can still matter in regulated or automotive environments. Do not choose a generic LM324 solely because it contains four amplifiers: package, pinout, common-mode range, output swing, and output architecture may differ. For new precision or low-noise designs, verify noise, offset, slew rate, input capacitance, and supply behavior directly in the manufacturer datasheet.

與替代品比較

參數 本產品 LM2902AWYDT LM2902HYDT LM2902KVQDR LM2902WDT LM2902WYPT
Package 14-SO 14-SO 14-SO 14-SOIC 14-SO 14-SO
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics

主要差異化特點

  • Four independent channels in one 14-SO package (對比LM324KAPWR)
  • Push-pull output architecture (對比LM2902AWYDT)
  • General-purpose signal bandwidth (對比LM2902HYDT)

設計說明

Place the supply-bypass capacitor immediately between the VCC+ and VCC- pins, with short, low-inductance traces and a solid ground return. Keep each feedback loop compact and route it away from adjacent input and output nets. Because the package contains four amplifiers, maintain consistent grounding and decoupling arrangements for every channel; otherwise channel-to-channel performance can vary even though all four amplifiers share the same package.

Treat the non-inverting input as a high-impedance node and minimize its copper area when driving a high-impedance source. The 2 nA input bias current can create error when multiplied by a large source impedance, while the 20 nA input offset current contributes to input-referred error. Use guarding, shielding, or a nearby low-input-bias buffer when leakage and surface contamination would otherwise dominate the measurement.

Do not assume that every quad operational amplifier is pin-compatible with LM2902WYDT. Confirm the 14-SO pin map, amplifier-channel ordering, supply-pin arrangement, common-mode input range, and output-swing limits before substitution. In particular, a familiar 14-pin quad amplifier may use rail-to-rail input stages while LM2902WYDT retains different common-mode and output-swing boundaries, which can make an apparently identical footprint electrically unsuitable.

Keep each closed-loop gain compatible with the 1.3 MHz gain-bandwidth product. A high-gain configuration has less usable bandwidth and can become sensitive to parasitic capacitance around the inverting input. Use resistor values that preserve closed-loop stability, avoid excessively long feedback traces, and verify settling behavior when the channel drives an ADC, DAC, or switched-capacitor load.

合規資訊

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The distributor product record identifies LM2902WYDT as RoHS compliant. No additional compliance claims are stated.

相關搜尋

LM2902WYDT datasheet LM2902WYDT datasheet pdf LM2902WYDT pinout LM2902WYDT specifications LM2902WYDT 14-SO package STMicroelectronics LM2902WYDT LM2902WYDT equivalent LM2902WYDT drop-in replacement LM2902WYDT vs LM2902AWYDT LM2902WYDT application circuit LM2902WYDT price LM2902WYDT stock

相關元件與詞彙

STMicroelectronics LM2902WYDT LM2902W LM2902AWYDT LM2902HYDT LM2902KVQDR LM2902WDT LM2902WYPT quad operational amplifier operational amplifier analog amplifier IC general-purpose amplifier low-power operational amplifier push-pull output internal frequency compensation 1.3 MHz gain-bandwidth product 100 dB open-loop gain 375 uA supply current 20 nA input offset current 2 nA input bias current 800 V differential input voltage 14-SO SOIC-14 surface mount industrial signal conditioning active filter RoHS
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情