LM2902WYPT - 1.3MHz Quad Op Amp | STMicroelectronics
MPN: LM2902WYPT ✓ 啟用中LM2902WYPT 概覽
An operational amplifier, or op amp, is a high-gain analog building block used to amplify voltage differences, buffer sensors, drive loads, and implement feedback-control loops. The LM2902 belongs to the broader operational amplifier hierarchy, where four internally compensated amplifiers are integrated into one package to reduce component count in industrial, automotive, and instrumentation systems. Its push-pull output stage supports a variety of low- and mid-frequency signal-conditioning applications.
Key electrical characteristics include a 1.3 MHz gain-bandwidth product, 100 dB large-signal voltage gain, 375 uA supply current per amplifier, 20 nA low input bias current, and 2 nA low input-offset current. The 800 V ESD protection rating helps improve handling robustness, while the wide supply range supports circuits operating from industrial control, test, measurement, and vehicle-related power systems.
The LM2902 architecture provides four independent high-gain amplifiers with internal frequency compensation. This simplifies PCB layout because external compensation networks are not required. The common-mode input range includes the negative supply rail, making the device useful in single-supply sensor interfaces where signals remain close to ground. The wide input bias-voltage range also supports bipolar input stages within the device.
Typical uses include four-channel sensor amplification, low-frequency active filtering, transducer interfacing, current monitoring, sample-and-hold signal conditioning, and general-purpose analog control. The device can also provide independent amplifier sections for comparators, waveform conditioners, and audio or communications interface circuits when the bandwidth and slew-rate requirements remain modest.
For layout, place input and feedback components close to their associated amplifier pins and keep sensitive input traces away from high-current switching paths. Because the LM2902 is intended primarily for low-frequency precision-oriented applications, verify bandwidth, output swing, load capability, noise, and input-offset requirements against the actual signal path. Stable feedback design is essential because the amplifiers are internally compensated.
This product page combines the manufacturer device information with practical engineering guidance for single- and dual-supply implementation, application analysis, package considerations, and drop-in replacement evaluation. It is intended to help engineers select the LM2902WYPT for general-purpose four-amplifier designs and to identify what must be checked before PCB-level substitution.
直接替換替代品,適用於 LM2902WYPT — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LM2902WYPT (相同外形與佔位) — 差異在於 Package, Gain-Bandwidth Product, Amplifier Type, Number of Amplifiers, Product Type.
LM2902YPT
✅ 直接替換聯絡詢價
查看資料表 →LM2902PWRG3
✅ 直接替換聯絡詢價
查看資料表 →LM2902WYPT 最大額定值與電氣特性
| Amplifier Count | 4 amplifiers |
| Product Type | Low-power quad operational amplifier |
| Gain-Bandwidth Product | 1.3 MHz |
| Large-Signal Voltage Gain | 100 dB |
| Supply Current per Amplifier | 375 uA |
| Input Bias Current | 20 nA |
| Input Offset Current | 2 nA |
| ESD Protection | 800 V |
| Single-Supply Operating Range | Up to 30 V |
| Dual-Supply Operating Range | Up to ±15 V |
| Input Common-Mode Voltage Range | Includes the negative supply rail |
| Frequency Compensation | Internal |
| Output Stage | Push-pull |
| 封裝 | 14-TSSOP |
| Package Width | 4.40 mm |
| 安裝類型 | Surface mount |
LM2902WYPT 4.40 mm 腳位配置指南
LM2902WYPT(4.40 mm 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: LM2902WYPT.
請參閱 資料表 以查看完整腳位配置。
典型應用
LM2902WYPT 適用於 6 應用s: Industrial Sensor Signal Conditioning, Automotive Control Circuit Amplification, Active Low-Frequency Filters, Current Monitoring and Control Loops, Test and Measurement Buffering, Audio and Communications Interface Circuits.
Industrial Sensor Signal Conditioning
The LM2902WYPT fits four-channel industrial sensor interfaces because it combines four independent amplifiers with an input common-mode range that includes the negative supply rail. This helps process signals from pressure, temperature, and position sensors that operate near ground. With a 1.3 MHz gain-bandwidth product and 375 uA supply current per amplifier, it provides useful bandwidth without imposing a high power budget. Use each section for gain, buffering, or active filtering, and verify input offset, output swing, noise, and operating-temperature requirements against the sensor interface.
推薦
Automotive Control Circuit Amplification
The LM2902WYPT is suitable for automotive and industrial control circuits that need several low-frequency analog channels in one package. The STMicroelectronics device provides four internally compensated high-gain amplifiers, a 1.3 MHz gain-bandwidth product, and operation across single supplies up to 30 V. That combination supports conditioning of resistive, inductive, and voltage-based sensor signals while reducing board area. The circuit must remain within the verified supply and common-mode limits, and the automotive qualification status should be confirmed for each production order code.
推薦
Active Low-Frequency Filters
The LM2902WYPT can implement several active-filter stages because it contains four independent, internally compensated amplifiers with a 1.3 MHz gain-bandwidth product. SECTIONS can form low-pass, high-pass, band-pass, or notch networks when component tolerances and closed-loop gain are selected carefully. The 375 uA supply current per amplifier is useful in compact multi-filter modules, while the push-pull output stage supports standard feedback configurations. Confirm slew rate, output-current capability, and stability margins before selecting component values for the intended signal bandwidth.
推薦
Current Monitoring and Control Loops
The LM2902WYPT is appropriate for current-monitoring and slow feedback-control circuits that need several amplifier channels sharing one package. Its 100 dB large-signal voltage gain and 1.3 MHz gain-bandwidth product provide useful open-loop performance for gain-of-10 or lower analog stages, while internal frequency compensation avoids external compensation networks. The four channels can amplify a current-sense signal, condition a reference, compare a threshold, and buffer a control output. Verify the input offset current of 2 nA, output swing, and response time against the control-loop accuracy and stability requirements.
推薦
Test and Measurement Buffering
The LM2902WYPT can provide active buffering, gain, and differential-to-single-ended stages in test and measurement equipment. Four independent channels reduce the number of amplifier packages needed when routing several low-frequency signals through a common analog section. Its 375 uA supply current per amplifier is suitable for compact portable or embedded test systems, and the negative-rail-inclusive common-mode input range supports circuits that reference ground. Before using it with high-accuracy or high-impedance probes, verify input bias current, offset voltage, input capacitance, and output settling requirements.
推薦
Audio and Communications Interface Circuits
The LM2902WYPT can handle low-frequency audio and communications interface functions such as input buffering, active gain, impedance conversion, and channel mixing. Its 1.3 MHz gain-bandwidth product covers many voice-band and control-signal tasks, while the push-pull output stage supports common feedback networks. Four channels allow a compact implementation of a two-channel audio preamplifier plus auxiliary buffering or filtering functions. Audio designs should also check noise, output swing, slew rate, channel matching, and the system load, because bandwidth alone does not determine full signal quality.
推薦
推薦產品摘要
工程參考資料,適用於 LM2902WYPT — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LM2902YPT | LM2902PW |
|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | Texas Instruments |
| Package | 14-TSSOP | 14-TSSOP | 14-TSSOP |
| Amplifier Count | 4 amplifiers | 4 amplifiers | 4 amplifiers |
主要差異化特點
- Four integrated amplifier channels with internal compensation (對比LM2902PW)
- Wide single- and dual-supply operating capability (對比LM2902YPT)
- Ground-referenced input capability (對比LM2902PW)
設計說明
Place each amplifier's input, feedback, and decoupling connections close to the associated TSSOP pins. Keep high-impedance input traces short, avoid routing them beneath digital or switching-current paths, and use a continuous ground plane. The LM2902 has four independent amplifier sections, so assign and route each channel consistently to prevent feedback from one signal path from coupling into another.
Do not assume that every LM2902 package variant is a mechanical replacement. The target uses a 14-TSSOP package, while other ordering codes in the family can use different lead styles or temperature options. Compare the manufacturer pin table, footprint dimensions, exposed-pad requirements, and ordering information before replacing a populated board. For new layouts, verify input offset, common-mode limits, output swing, and load drive under the actual supply voltage.
Decouple the supply pins locally with ceramic capacitance selected using the stability and transient-response requirements in the manufacturer datasheet. Estimated: four amplifiers operating at 375 uA each draw approximately 1.5 mA total, excluding the load currents driven through the output stages. This arithmetic estimate does not include input bias current, output-current demand, or supply ripple, so verify the regulator and capacitor design against the complete loaded circuit.
合規資訊
The device is designed for automotive and industrial control applications, but the exact orderable MPN's environmental declarations and AEC-Q100 qualification status were not stated. Request current compliance documentation when required.